China manufacturer JZQ ZQ 500 650 850 series gearbox type soft high rpm gear reducer for bending machine worm gear motor

Applicable Industries: Manufacturing Plant, Construction works , Energy & Mining
Gearing Arrangement: Cycloidal
Output Torque: 375~519520Nm(customized)
Input Speed: 600~1500rpm
Output Speed: 1.5~1200rpm(customized)
Pole: One/Two/Three Stage Speed Reducer
Ratio: 1.25-6.3
Housing Material: Cast Iron
Working temperature: -40~45℃
Application: mining, chemical industry,steel metallurgy,lifting transpor and ect.
Process: Carburizing, Nitriding , Grinding
Efficiency: 94%~98%
Mounting Position: Horizontal,Vertical,Flange
Color: Blue,Green,Gray,Red
Type: JZQ ZQ series gearbox type soft high rpm gear reducer for bending
Packaging Details: sea worthy wooden case for JZQ ZQ series gearbox type soft high rpm gear reducer for bending machine

PROFESSIONAL MANUFACTURE
—— SINCE 1995
ZQ Series Helical Gearbox Reducer
ZQ JZQ series soft gear box reducer
TianQi——industrial gearbox manufacturers
Chinese gearbox speed reducer is widely used in mining machinery, chemical industry,steel metallurgy, light industry,environmental protection, paper making, printing, lifting transport, food industry and so on.
Main Series Product: R series helical gear reducer, K series spiral bevel gear reducer, NGW, P series planetary reducer, H B series gearbox, Z (ZDY, ZLY, ZSY, and ZFY) serial hard tooth surface cylindrical gear reducer, D (DBY and DCY) serial hard tooth surface cone gear reducer, cycloid reducer, etc. Meanwhile, map sample processing business can be undertaken.

Feature:

  • Applicable to the metallurgical,power generation,water treatment,construction,chemical,paper,
    textiles,medicine,food and other industries.
  • The transmission efficiency of single-stage can reach up to 98%, two-stage can reach 96%, three-stage can reach 94%.
  • The gear processed by Carburizing & Grinding with high precision.
  • High precision gear, steady transmission, large load capacity
  • Long service life.
  • One Two Three Stage Speed Reducer, CZPT Diesel Engine YOTFJ45speed-adjustable hydraulic coupling reverse gear reducer box for mud pump Gearbox speed reducer 3 phase electric
  • SpecificationJZQ ZQ series gearbox type soft high rpm gear reducer for bending machine
    (please contact us for more types & model)
    Mounting Diamensions

    Model selection for gear box transmission:
    Closely using the ideal reduction ratio.
    Reduction ratio = servo motor speed / reducer output shaft speed
    Torque calculation: Torque calculation is very important for the life of reducer, and pay attention to whether the maximum torque value (TP) of acceleration exceeds the maximum load torque of the reducer.
    The applicable power is usually the applicable power of the servo models on the market, the applicability of the reducer is very high, the working coefficient can be maintained above 1.2, but the choice can also be based on their own needs to decide. Cylindrical Marine Gearbox Gear Speed Reducer.2 ratio ZLY180 Cylindrical Marine Gearbox Gear Speed Reducer.2 ratio ZLY180 Cylindrical Marine Gearbox Gear Speed Reducer.JZQ ZQ series gearbox type soft high rpm gear reducer for bending machine.

    Driven machines
    Waste water treatmentThickeners,filter presses,flocculation apparata,aerators,raking equipment,combined longitudinal and rotary rakes,pre-thickeners,screw pumps,water turbines,centrifugal pumpsDredgersBucket conveyors, dumping devices, carterpillar travelling gears, bucket wheel excavators as pick up, bucket wheel excavator for primitive material, cutter head, traversing gears
    Chemical industryPlate bending machines, extruders, dough mills, rubbers calenders, cooling drums, mixers for uniform media, agitators for media with uniform density, toasters, centrifugesMetal working millsplate tilters, ingot pushers, winding machines, cooling bed transfer frames, roller straigheners, table continuous intermittent, roller tables reversing tube mills, shears continuous, casting drivers, reversing CZPT mills
    Metal working millsReversing slabbing mills. reversing wire mills, reversing sheet mills, reversing plate mill, roll adjustment drivesConveyorsBucket conveyors, hauling winches, hoists, belt conveyors, good lifts, passenger lifts, apron conveyors, escalators, rail travlling gears
    Frequency convertersReciprocating compressors
    CranesSlewing gears, luffing gears, High precision customization Various shapes and sizes Integration Stepper Motor Worm Gear Gear Worm and Mini Worm Gear travelling gears, hoisting gear, derricking jib cranesCooling towersCooling tower fans, blowers axial and radial
    Cane sugar productionCane knives, cane millsBeet sugar productionBeet cossettes macerators, extraction plants, mechanical refrigerators, juice boilers, sugar beet washing machines, sugar beet cutter
    Paper machinesPulper drivesCablewaysMaterial ropeways, continuous ropeway
    Cement industryConcrete mixer, breaker, rotary kilns, tube mills, separators, roll crushers

    Technology
    Chinese Speed Reducer is a mechanical transmission in many fields of the national economy. The product categories covered by the industry include all kinds of gear reducer, planetary gear reducer and worm reducer, as well as various special transmission devices such as speed increasing device, speed control Devices, including various types of flexible transmission devices, such as compound transmission. Products and services in the field of metallurgy, nonferrous metals, coal, building materials, ships, water conservancy, electricity, construction machinery and petrochemical industries.

    In all fields of national economy and national defense industry, gearbox products have a wide range of applications. Food light industry, electric machinery, construction machinery, metallurgy machinery, cement machinery, environmental protection machinery, electronic appliances, road construction machinery, water conservancy machinery, chemical machinery, mining machinery, conveyor machinery, building materials machinery, rubber machinery, petroleum machinery and other industries have strong demand of Reducer products. Cylindrical Marine Gearbox Gear Speed Reducer.2 ratio ZLY180 Cylindrical Marine Gearbox Gear Speed Reducer.JZQ ZQ series gearbox type soft high rpm gear reducer for bending machine.

    Packaging & Shipping
    Company Information
    Founded in 1995, HangZhou Boji Power machinery Co.,Ltd has 22 years of reducer production experience and credibility. The company has professional engineer team, advanced technology production and skilled workers, with located in HangZhou of ZheJiang province which has solid industrial base and developed transportation.

    FAQ 1.Q:Are you the factory or trading company?
    A:We are the professional Factory with 22 years of experience.

    2.Q:Can you customize according to our requirements?
    A:Yes, we can design nonstandard products according to customer’s drawing and sample.

    3.Q:How long is the delivery date?
    A:10-20 working days.

    4.Q:Where is your factory?
    A:We are in HangZhou of ZheJiang Province, High Power Harmonic Drive Reducer Reduction Gearbox For Atv Vehicles you can get here by high speed train or fly to HangZhou.
    Welcome to visit us!

    Types of Bevel Gears

    Bevel Gears are used in a number of industries. They are used in wheeled excavators, dredges, conveyor belts, mill actuators, and rail transmissions. A bevel gear’s spiral or angled bevel can make it suitable for confined spaces. It is also used in robotics and vertical supports of rolling mills. You can use bevel gears in food processing processes. For more information on bevel gears, read on.
    gear

    Spiral bevel gear

    Spiral bevel gears are used to transmit power between two shafts in a 90-degree orientation. They have curved or oblique teeth and can be fabricated from various metals. Bestagear is one manufacturer specializing in medium to large spiral bevel gears. They are used in the mining, metallurgical, marine, and oil fields. Spiral bevel gears are usually made from steel, aluminum, or phenolic materials.
    Spiral bevel gears have many advantages. Their mesh teeth create a less abrupt force transfer. They are incredibly durable and are designed to last a long time. They are also less expensive than other right-angle gears. They also tend to last longer, because they are manufactured in pairs. The spiral bevel gear also reduces noise and vibration from its counterparts. Therefore, if you are in need of a new gear set, spiral bevel gears are the right choice.
    The contact between spiral bevel gear teeth occurs along the surface of the gear tooth. The contact follows the Hertz theory of elastic contact. This principle holds for small significant dimensions of the contact area and small relative radii of curvature of the surfaces. In this case, strains and friction are negligible. A spiral bevel gear is a common example of an inverted helical gear. This gear is commonly used in mining equipment.
    Spiral bevel gears also have a backlash-absorbing feature. This feature helps secure the thickness of the oil film on the gear surface. The shaft axis, mounting distance, and angle errors all affect the tooth contact on a spiral bevel gear. Adjusting backlash helps to correct these problems. The tolerances shown above are common for bevel gears. In some cases, manufacturers make slight design changes late in the production process, which minimizes the risk to OEMs.

    Straight bevel gear

    Straight bevel gears are among the easiest types of gears to manufacture. The earliest method used to manufacture straight bevel gears was to use a planer equipped with an indexing head. However, improvements have been made in manufacturing methods after the introduction of the Revacycle system and the Coniflex. The latest technology allows for even more precise manufacturing. Both of these manufacturing methods are used by CZPT. Here are some examples of straight bevel gear manufacturing.
    A straight bevel gear is manufactured using two kinds of bevel surfaces, namely, the Gleason method and the Klingelnberg method. Among the two, the Gleason method is the most common. Unlike other types of gear, the CZPT method is not a universal standard. The Gleason system has higher quality gears, since its adoption of tooth crowning is the most effective way to make gears that tolerate even small assembly errors. It also eliminates the stress concentration in the bevelled edges of the teeth.
    The gear’s composition depends on the application. When durability is required, a gear is made of cast iron. The pinion is usually three times harder than the gear, which helps balance wear. Other materials, such as carbon steel, are cheaper, but are less resistant to corrosion. Inertia is another critical factor to consider, since heavier gears are more difficult to reverse and stop. Precision requirements may include the gear pitch and diameter, as well as the pressure angle.
    Involute geometry of a straight bevel gear is often computed by varying the surface’s normal to the surface. Involute geometry is computed by incorporating the surface coordinates and the theoretical tooth thickness. Using the CMM, the spherical involute surface can be used to determine tooth contact patterns. This method is useful when a roll tester tooling is unavailable, because it can predict the teeth’ contact pattern.
    gear

    Hypoid bevel gear

    Hypoid bevel gears are an efficient and versatile speed reduction solution. Their compact size, high efficiency, low noise and heat generation, and long life make them a popular choice in the power transmission and motion control industries. The following are some of the benefits of hypoid gearing and why you should use it. Listed below are some of the key misperceptions and false assumptions of this gear type. These assumptions may seem counterintuitive at first, but will help you understand what this gear is all about.
    The basic concept of hypoid gears is that they use two non-intersecting shafts. The smaller gear shaft is offset from the larger gear shaft, allowing them to mesh without interference and support each other securely. The resulting torque transfer is improved when compared to conventional gear sets. A hypoid bevel gear is used to drive the rear axle of an automobile. It increases the flexibility of machine design and allows the axes to be freely adjusted.
    In the first case, the mesh of the two bodies is obtained by fitting the hyperboloidal cutter to the desired gear. Its geometric properties, orientation, and position determine the desired gear. The latter is used if the desired gear is noise-free or is required to reduce vibrations. A hyperboloidal cutter, on the other hand, meshes with two toothed bodies. It is the most efficient option for modeling hypoid gears with noise concerns.
    The main difference between hypoid and spiral bevel gears is that the hypoid bevel gear has a larger diameter than its counterparts. They are usually found in 1:1 and 2:1 applications, but some manufacturers also provide higher ratios. A hypoid gearbox can achieve speeds of three thousand rpm. This makes it the preferred choice in a variety of applications. So, if you’re looking for a gearbox with a high efficiency, this is the gear for you.

    Addendum and dedendum angles

    The addendum and dedendum angles of a bevel gear are used to describe the shape and depth of the teeth of the gear. Each tooth of the gear has a slightly tapered surface that changes in depth. These angles are defined by their addendum and dedendum distances. Addendum angle is the distance between the top land and the bottom surface of the teeth, while dedendum angle is the distance between the pitch surface and the bottom surface of the teeth.
    The pitch angle is the angle formed by the apex point of the gear’s pitch cone with the pitch line of the gear shaft. The dedendum angle, on the other hand, is the depth of the tooth space below the pitch line. Both angles are used to measure the shape of a bevel gear. The addendum and dedendum angles are important for gear design.
    The dedendum and addendum angles of a bevel gear are determined by the base contact ratio (Mc) of the two gears. The involute curve is not allowed to extend within the base diameter of the bevel gear. The base diameter is also a critical measurement for the design of a gear. It is possible to reduce the involute curve to match the involute curve, but it must be tangential to the involute curve.
    The most common application of a bevel gear is the automotive differential. They are used in many types of vehicles, including cars, trucks, and even construction equipment. They are also used in the marine industry and aviation. Aside from these two common uses, there are many other uses for bevel gears. And they are still growing in popularity. But they’re a valuable part of automotive and industrial gearing systems.
    gear

    Applications of bevel gears

    Bevel gears are used in a variety of applications. They are made of various materials depending on their weight, load, and application. For high-load applications, ferrous metals such as grey cast iron are used. These materials have excellent wear resistance and are inexpensive. For lower-weight applications, steel or non-metals such as plastics are used. Some bevel gear materials are considered noiseless. Here are some of their most common uses.
    Straight bevel gears are the easiest to manufacture. The earliest method of manufacturing them was with a planer with an indexing head. Modern manufacturing methods introduced the Revacycle and Coniflex systems. For industrial gear manufacturing, the CZPT uses the Revacycle system. However, there are many types of bevel gears. This guide will help you choose the right material for your next project. These materials can withstand high rotational speeds and are very strong.
    Bevel gears are most common in automotive and industrial machinery. They connect the driveshaft to the wheels. Some even have a 45-degree bevel. These gears can be placed on a bevel surface and be tested for their transmission capabilities. They are also used in testing applications to ensure proper motion transmission. They can reduce the speed of straight shafts. Bevel gears can be used in many industries, from marine to aviation.
    The simplest type of bevel gear is the miter gear, which has a 1:1 ratio. It is used to change the axis of rotation. The shafts of angular miter bevel gears can intersect at any angle, from 45 degrees to 120 degrees. The teeth on the bevel gear can be straight, spiral, or Zerol. And as with the rack and pinion gears, there are different types of bevel gears.

    China manufacturer JZQ ZQ 500 650 850 series gearbox type soft high rpm gear reducer for bending machine     worm gear motorChina manufacturer JZQ ZQ 500 650 850 series gearbox type soft high rpm gear reducer for bending machine     worm gear motor