Produktbeschreibung
JWB Series Speed Variator
1. Features:
JWB-X type
- Sizes: ≥04
- Power up to 1.5 kW or more
- Cases in RAL 5571 blue cast iron
- Shafts: case hardened and tempered steel.
- Internal components: heat-treated steel
- Output speed with 4 pole(1400r/min) motors: 2-10r/min;4.7-23.5r/min;15-75r/min;20-100r/min, 28-140r/min, 30-150r/min;40-200r/min;60-300r/min;80-400r/min;100-500r/min;190-950r/min.
- Output Torque value max 1002Nm
- Silent, vibration-free running
- Bidirectional rotation
- Control handwheel positionable on either side
- Slipping speed to max load at 5%
- Regulation sensibility: 0,5 rpm
- Painted with blue epoxy-polyester powder
JWB-X B type
- Sizes:01,02,03 and 04
- Power up to 1.5 kW or less
- Cases in die-cast aluminium alloy
- Shafts: case hardened and tempered steel.
- Internal components: heat-treated steel
- Output speed with 4 pole(1400r/min) motors: 2r/min-20r/min;4.7r/min-23.5r/min;6.5-32.5r/min, 8-40r/min, 9-45r/min, 13-65r/min, 15r/min-75r/min;18-90r/min, 25-125r/min, 28r/min-140r/min;40r/min-200r/min;60r/min-300r/min;80r/min-400r/min;100r/min-500r/min;190r/min-950r/min.
- Output Torque value max 795 Nm
- Silent, vibration-free running
- Bidirectional rotation
- Control hand wheel positionable on either side
- Slipping speed to max load at 5%
- Regulation sensibility: 0,5 rpm
- Painted with blue epoxy-polyester powder
2. Technical parameters
| Type | Output Torque | Output Shaft Dia. | Output Speed Range | 2rpm-950rpm | |
| SWB01 | 2.6-1.6N.m | φ11 | Applicable Motor Power | 0.18kW-7.5kW | |
| SWB02 | 258-1.8N.m | φ14,φ24,φ28,φ32 | |||
| SWB03 | 426-4N.m | φ24,φ28,φ38 | Input Options | With Inline AC Motor | |
| SWB04 | 795-8N.m | φ28,φ38,φ42 | With IEC Motor | ||
| SWB05 | 535-16N.m | φ38,φ48,φ55 | With Input Shaft | ||
| SWB06 | 1002-40N.m | φ42,φ55,φ70 | With Input Flange | ||
About Us
ZheJiang CZPT Drive Co.,Ltd,the predecessor was a state-owned military mould enterprise, was established in 1965. CZPT specializes in the complete power transmission solution for high-end equipment manufacturing industries based on the aim of “Platform Product, Application Design and Professional Service”.
Starshine have a strong technical force with over 350 employees at present, including over 30 engineering technicians, 30 quality inspectors, covering an area of 80000 square CZPT and kinds of advanced processing machines and testing equipments. We have a good foundation for the industry application development and service of high-end speed reducers & variators owning to the provincial engineering technology research center,the lab of gear speed reducers, and the base of modern R&D.
Our Team
Quality Control
Quality:Insist on Improvement,Strive for Excellence With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of our products,on the contrary,wcreate the value of quality.
Quality policy:to enhance the overall level in the field of power transmission
Quality View:Continuous Improvement , pursuit of excellence
Quality Philosophy:Quality creates value
3. Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection; responsible for tracking bad, to monitor the supplier to take corrective
measures to prevent recurrence.
4. Process Quality Control
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend;
found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state.
5. FQC(Final QC)
After the manufacturing department will complete the product, stand in the customer’s position on the finished product quality verification, in order to ensure the quality of
customer expectations and needs.
6. OQC(Outgoing QC)
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the
product is a product inspection to determine the qualified products.
7. Certification.
Verpackung
Delivery
/* 22. Januar 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Anwendung: | Motor, Agricultural Machinery, Ceramic |
|---|---|
| Härte: | Gehärtete Zahnoberfläche |
| Installation: | Vertical or Horizotal Type |
| Layout: | Koaxial |
| Zahnradform: | Planetary Conedisk Friction Type |
| Schritt: | Stepless |
| Anpassung: |
Verfügbar
| Kundenspezifische Anfrage |
|---|
Herausforderungen bei der Realisierung hoher Übersetzungsverhältnisse und kompakter Bauweise in Planetengetrieben
Die Konstruktion von Planetengetrieben mit hohen Übersetzungsverhältnissen bei gleichzeitig kompakter Bauform stellt aufgrund der komplexen Anordnung der Zahnräder und der Notwendigkeit, verschiedene Faktoren auszugleichen, mehrere Herausforderungen dar:
Platzbeschränkungen: Eine Erhöhung der Getriebeübersetzung erfordert in der Regel den Einbau weiterer Planetengetriebestufen, was zusätzliche Zahnräder und Bauteile zur Folge hat. Begrenzter Bauraum kann es jedoch schwierig machen, diese zusätzlichen Komponenten unterzubringen, ohne die Kompaktheit des Getriebes zu beeinträchtigen.
Effizienz: Mit zunehmender Anzahl an Planetenstufen zur Erzielung höherer Übersetzungsverhältnisse kann es zu Einbußen beim Wirkungsgrad kommen. Zusätzliche Zahnradeingriffe und Reibungsverluste können den Gesamtwirkungsgrad verringern und die Getriebeleistung beeinträchtigen.
Lastverteilung: Bei der Konstruktion von Planetengetrieben mit hohem Übersetzungsverhältnis ist die Lastverteilung über mehrere Stufen hinweg entscheidend. Eine optimale Lastverteilung gewährleistet, dass jede Stufe die Last proportional trägt, wodurch vorzeitiger Verschleiß verhindert und ein zuverlässiger Betrieb sichergestellt wird.
Lageranordnung: Die Unterbringung mehrerer Planetengetriebestufen erfordert eine effektive Lageranordnung zur Unterstützung der rotierenden Komponenten. Eine ungeeignete Lagerauswahl oder -anordnung kann zu erhöhter Reibung, verringertem Wirkungsgrad und potenziellen Ausfällen führen.
Fertigungstoleranzen: Um hohe Übersetzungsverhältnisse zu erzielen, sind enge Fertigungstoleranzen erforderlich, um präzise Zahnprofile und exakten Zahneingriff zu gewährleisten. Abweichungen können zu Geräuschen, Vibrationen und Leistungseinbußen führen.
Schmierung: Eine ausreichende Schmierung ist entscheidend für einen reibungslosen Betrieb und die Reduzierung der Reibung bei steigenden Übersetzungsverhältnissen. Die korrekte Schmierstoffverteilung über mehrere Stufen hinweg kann jedoch eine Herausforderung darstellen und die Effizienz und Lebensdauer beeinträchtigen.
Lärm und Vibrationen: Die Komplexität von Planetengetrieben mit hohem Übersetzungsverhältnis kann aufgrund der höheren Anzahl an Zahnradinteraktionen zu erhöhten Geräusch- und Vibrationspegeln führen. Die Kontrolle von Geräuschen und Vibrationen ist daher unerlässlich, um eine akzeptable Leistung und einen hohen Bedienkomfort zu gewährleisten.
Um diese Herausforderungen zu meistern, setzen Ingenieure fortschrittliche Konstruktionstechniken, hochpräzise Fertigungsprozesse, Spezialwerkstoffe, innovative Lageranordnungen und optimierte Schmierstrategien ein. Die richtige Balance zwischen hohen Übersetzungsverhältnissen und kompakter Bauweise zu erreichen, erfordert die sorgfältige Berücksichtigung dieser Faktoren, um die Zuverlässigkeit, Effizienz und Leistungsfähigkeit des Getriebes zu gewährleisten.
Maintenance Practices to Extend the Lifespan of Planetary Gearboxes
Proper maintenance is essential for ensuring the longevity and optimal performance of planetary gearboxes. Here are specific maintenance practices that can help extend the lifespan of planetary gearboxes:
1. Regular Inspections: Implement a schedule for routine visual inspections of the gearbox. Look for signs of wear, damage, oil leaks, and any abnormal conditions. Early detection of issues can prevent more significant problems.
2. Lubrication: Adequate lubrication is crucial for reducing friction and wear between gearbox components. Follow the manufacturer’s recommendations for lubricant type, viscosity, and change intervals. Ensure that the gearbox is properly lubricated to prevent premature wear.
3. Proper Installation: Ensure the gearbox is installed correctly, following the manufacturer’s guidelines and specifications. Proper alignment, torque settings, and clearances are critical to prevent misalignment-related wear and other issues.
4. Load Monitoring: Avoid overloading the gearbox beyond its designed capacity. Excessive loads can accelerate wear and reduce the gearbox’s lifespan. Regularly monitor the load conditions and ensure they are within the gearbox’s rated capacity.
5. Temperature Control: Maintain the operating temperature within the recommended range. Excessive heat can lead to accelerated wear and lubricant breakdown. Adequate ventilation and cooling measures may be necessary in high-temperature environments.
6. Seal and Gasket Inspection: Regularly check seals and gaskets for signs of leakage. Damaged seals can lead to lubricant loss and contamination, which can cause premature wear and gear damage.
7. Vibration Analysis: Use vibration analysis techniques to detect early signs of misalignment, imbalance, or other mechanical issues. Monitoring vibration levels can help identify problems before they lead to serious damage.
8. Preventive Maintenance: Establish a preventive maintenance program based on the gearbox’s operational conditions and usage. Perform scheduled maintenance tasks such as gear inspections, lubricant changes, and component replacements as needed.
9. Training and Documentation: Ensure that maintenance personnel are trained in proper gearbox maintenance procedures. Keep comprehensive records of maintenance activities, inspections, and repairs to track the gearbox’s condition and history.
10. Consult Manufacturer Guidelines: Always refer to the manufacturer’s maintenance and servicing guidelines specific to the gearbox model and application. Following these guidelines will help maintain warranty coverage and ensure best practices are followed.
By adhering to these maintenance practices, you can significantly extend the lifespan of your planetary gearbox, minimize downtime, and ensure reliable performance for your industrial machinery or application.
Advantages of Planetary Gearboxes Compared to Other Gearbox Configurations
Planetary gearboxes, also known as epicyclic gearboxes, offer several advantages compared to other gearbox configurations. These advantages make them well-suited for a wide range of applications. Here’s a closer look at why planetary gearboxes are favored:
- Kompakte Größe: Planetary gearboxes are known for their compact and space-efficient design. The arrangement of multiple gears within a single housing allows for high gear reduction ratios without significantly increasing the size of the gearbox.
- High Torque Density: Due to their compact design, planetary gearboxes offer high torque density, meaning they can transmit a significant amount of torque relative to their size. This makes them ideal for applications where space is limited, but high torque is required.
- Effizienz: Planetary gearboxes can achieve high efficiency levels, especially when properly lubricated and well-designed. The arrangement of multiple meshing gears allows for load distribution, reducing individual gear tooth stresses and minimizing losses due to friction.
- Multiple Gear Stages: Planetary gearboxes can be designed with multiple stages, allowing for higher gear reduction ratios. This is particularly advantageous when precise control of output speed and torque is required.
- High Gear Ratios: Planetary gearboxes can achieve high gear reduction ratios in a single stage, eliminating the need for multiple external gears. This simplifies the overall design and reduces the number of components.
- Load Sharing: The multiple gear meshing arrangements in planetary gearboxes distribute loads evenly across multiple gears, reducing the stress on individual components and enhancing overall durability.
- High Precision: Planetary gearboxes offer high precision and accuracy in gear meshing, making them suitable for applications that demand precise motion control.
- Quiet Operation: The design of planetary gearboxes often leads to smoother and quieter operation compared to some other gearbox configurations, contributing to improved user experience.
Overall, the advantages of planetary gearboxes in terms of size, torque density, efficiency, versatility, and precision make them an attractive choice for a wide range of applications across industries, including robotics, automotive, aerospace, and industrial machinery.
editor by CX 2024-05-09
