Περιγραφή προϊόντος
China Factory Supply Helical Gearbox Geared Motor Speed Reducer
RF Series reducers are designed and manufactured on the basis of modular combination system.
Small size, light weight, large transmission torque, superior performance, stable operation, low noise, durable, can be installed in a variety of ways, can be matched with different types of motors, a wide range of applications. sewage treatment, chemical industry, pharmacy and other industries.
There are a lot of motor combinations, installation forms and structural schemes. The transmission ratio is classified and fine to meet different operating conditions, and the performance is superior.
Reinforced high rigid cast iron box; The hardened gear is made of high-quality alloy steel. Its surface is carburized, quenched and hardened, and the gear is finely ground. It has stable transmission, low noise, and large bearing capacity. Low temperature rise, long service life. It is widely used in metallurgy,1. Features: small offset output, compact structure, maximum use of box space, use of integral casting box, good stiffness, can improve the strength of the shaft and bearing life.
1.Technical data:
| Product Name | China Factory Supply Helical Gearbox Geared Motor Speed Reducer |
| Εξουσία | 0.12KW~160KW |
| Ροπή | 1.4N · m ~ 36600N · m |
| Output speed | 0.06 ~ 1090r/min |
| Gear material | 20CrMnTi alloy steel |
| Gear Processing | Grinding finish by HOFLER Grinding Machines |
| Noise Test | Below 65dB |
| Brand of bearings | C&U bearing, ZWZ,LYC, HRB, CHINAMFG ,etc |
| Brand of oil seal | NAK or other brand |
| Temp. rise (MAX) | 40ºC |
| Temp. rise (Oil)(MAX | 50ºC |
| Vibration | ≤20µm |
| Housing hardness | HBS190-240 |
| Surface hardness of gears | HRC58°~62 ° |
| Gear core hardness | HRC33~40 |
| Machining precision of gears | 5 Grade |
| Lubricating oil | GB L-CKC220-460, Shell Omala220-460 |
| Heat treatment | Carburizing, Quenching etc |
| Αποδοτικότητα | 95%~96% (depends on the transmission stage) |
| Bearing output mode | parallel output |
| Installation type and output mode | Bottom seated type flange type installation, solid,hollow shaft output. |
| Input mode | Direct motor, shaft input and connecting flange input |
| Input Method | Flange input(AM), shaft input(AD), inline AC motor input, or AQA servo motor |
Λεπτομερείς φωτογραφίες
Προφίλ Εταιρείας
< ABOUT TILI
HangZhou Tili Reducer Co, Ltd has been committed to provide High-quality hardensurface extruder gearbox since established In 2003.
Since its establishment, we always been committed to creating High-quality products in the field of transmission in China and is determined to enter the global market the high-end market of the mechanical industry is based on technology, and industry serves the country. We have strong research and development capabilities and professional production team and elite salesteam have continuously innovated, we specialize in Planetary reducer, 4 series (R, K, F, S) reducers, CHINAMFG series single screw extruder reducer, DJYG series high torque extruder reducer, cycloidal reducer, sell well in Europe, USA, Japan, India, Brazil, Southeast Asia etc.
Relying on the 20 years of industry accumulation, we hold our company’s vision of “sustainable operation”, based on quality and service, in the global competitive environment, we strive to meet customers’ quality requirements and strive for stable growth and strive for excellence.
Adhere to the principle of integrity, grow together with customers, and share with employees.
We’re pleased to get your inquiry and we will reply you as soon as possible. We stick to the principle of “Quality first, service first, continuous improvement and innovation to meet the customers” for the management and “Zero defect, zero complaints” as the quality objective.
< WORKSHOP
< QUALITY CONTROL
Πιστοποιήσεις
Συσκευασία & Αποστολή
Οδηγίες εγκατάστασης
Συχνές ερωτήσεις
Q 1: Are you a trading company or a manufacturer?
A: We are a professional manufacturer specializing in manufacturing various series of reducer.
Q 2:Can you do OEM?
A:Yes, we can. We can do OEM for all the customers .if you want to order NON-STANDERD speed reducers,pls provide Drafts, Dimensions, Pictures and Samples if possible.
Q 3: How long is your warranty?
A: Our Warranty is 12 months under normal circumstances.
Q 4: Do you have inspection procedures for reducer?
A:100% self-inspection before packing.
Q 5: Can I have a visit to your factory before the order?
A: Sure, welcome to visit our factory.
Q 6:How to choose a gearbox? What if I don’t know which gear reducer I need?
A:You can refer to our catalogue to choose the gearbox or we can help to choose when you provide,the technical information of required output torque, output speed and motor parameter etc. Don’t worry, Send as much information as you can, our team will help you find the right 1 you are looking for.
Q 7: What information shall we give before placing a purchase order?
A:a) Type of the gearbox, Size , Transmission Ratio, input and output type, input flange, mounting position, motor information and shaft deflection etc. b)Housing color.c) Purchase quantity. d) Other special requirements
Q 8:What is the payment term?
A:You can pay via T/T(30% in advance as deposit before production +70% before delivery
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Εφαρμογή: | Motor, Machinery, Marine, Agricultural Machinery |
|---|---|
| Σκληρότητα: | Σκληρυμένη επιφάνεια δοντιού |
| Εγκατάσταση: | Horizontal Type |
| Σχέδιο: | Coaxial |
| Βήμα: | Three-Step |
| Colour: | Blue Silver Customerized |
| Προσαρμογή: |
Διαθέσιμος
| Προσαρμοσμένο Αίτημα |
|---|
Ποιες είναι οι παράμετροι που πρέπει να λαμβάνονται υπόψη για την επιλογή του κατάλληλου λιπαντικού για μειωτήρες ταχυτήτων;
Η επιλογή του κατάλληλου λιπαντικού για τους μειωτήρες ταχυτήτων είναι ζωτικής σημασίας για την εξασφάλιση βέλτιστης απόδοσης, μακροζωίας και αποδοτικότητας. Κατά την επιλογή του σωστού λιπαντικού, πρέπει να λαμβάνονται υπόψη αρκετές παράμετροι:
1. Φορτίο και ροπή: Το μέγεθος του φορτίου και της ροπής που μεταδίδεται από τον μειωτήρα ταχυτήτων επηρεάζει το ιξώδες και τις απαιτήσεις αντοχής της μεμβράνης του λιπαντικού. Τα βαρύτερα φορτία ενδέχεται να απαιτούν λιπαντικά υψηλότερου ιξώδους.
2. Ταχύτητα λειτουργίας: Η ταχύτητα με την οποία λειτουργεί ο μειωτήρας ταχυτήτων επηρεάζει την ικανότητα του λιπαντικού να διατηρεί μια συνεπή και προστατευτική μεμβράνη μεταξύ των επιφανειών του γραναζιού.
3. Εύρος θερμοκρασίας: Λάβετε υπόψη το εύρος θερμοκρασίας του περιβάλλοντος λειτουργίας. Τα λιπαντικά με κατάλληλους δείκτες ιξώδους είναι ζωτικής σημασίας για τη διατήρηση της απόδοσης υπό μεταβαλλόμενες συνθήκες θερμοκρασίας.
4. Έκθεση σε μολυσματικούς παράγοντες: Εάν ο μειωτήρας ταχυτήτων εκτίθεται σε σκόνη, βρωμιά, νερό ή άλλους ρύπους, η λίπανση θα πρέπει να έχει κατάλληλες ιδιότητες στεγανοποίησης και αντοχή στη μόλυνση.
5. Διάστημα λίπανσης: Προσδιορίστε το επιθυμητό διάστημα συντήρησης. Ορισμένα λιπαντικά απαιτούν συχνότερη αντικατάσταση, ενώ άλλα προσφέρουν εκτεταμένες περιόδους λειτουργίας.
6. Συμβατότητα με υλικά: Βεβαιωθείτε ότι το επιλεγμένο λιπαντικό είναι συμβατό με τα υλικά που χρησιμοποιούνται στον μειωτήρα ταχυτήτων, συμπεριλαμβανομένων των γραναζιών, των ρουλεμάν και των στεγανοποιήσεων.
7. Θόρυβος και κραδασμοί: Ορισμένα λιπαντικά έχουν ιδιότητες που μπορούν να βοηθήσουν στη μείωση του θορύβου και στην απόσβεση των κραδασμών, βελτιώνοντας τη συνολική εμπειρία χρήστη.
8. Περιβαλλοντικές επιπτώσεις: Λάβετε υπόψη τους περιβαλλοντικούς κανονισμούς και τους στόχους βιωσιμότητας κατά την επιλογή λιπαντικών.
9. Συστάσεις κατασκευαστή: Ακολουθήστε τις συστάσεις και τις οδηγίες του κατασκευαστή σχετικά με τον τύπο λίπανσης, τον βαθμό ιξώδους και τα διαστήματα συντήρησης.
10. Παρακολούθηση και Ανάλυση: Εφαρμόστε ένα πρόγραμμα παρακολούθησης και ανάλυσης λίπανσης για την αξιολόγηση της κατάστασης και της απόδοσης του λιπαντικού με την πάροδο του χρόνου.
Αξιολογώντας προσεκτικά αυτές τις παραμέτρους και συμβουλευόμενοι ειδικούς λίπανσης, οι βιομηχανίες μπορούν να επιλέξουν το καταλληλότερο λιπαντικό για τους μειωτήρες ταχυτήτων τους, εξασφαλίζοντας αξιόπιστη και αποτελεσματική λειτουργία.
How do gear reducers handle shock loads and sudden changes in torque?
Gear reducers are designed to handle shock loads and sudden changes in torque through several mechanisms that enhance their durability and reliability in challenging operating conditions.
1. Robust Construction: Gear reducers are constructed using high-strength materials and precision manufacturing techniques. This ensures that the gears, bearings, and other components can withstand sudden impacts and high torque fluctuations without deformation or failure.
2. Shock-Absorbing Features: Some gear reducer designs incorporate shock-absorbing features, such as flexible couplings, elastomeric elements, or torsionally flexible gear designs. These features help dampen and dissipate the energy from sudden shocks or torque spikes, reducing the impact on the entire system.
3. Torque Limiters: In applications where shock loads are common, torque limiters may be integrated into the gear reducer. These devices automatically disengage or slip when a certain torque threshold is exceeded, preventing damage to the gears and other components.
4. Overload Protection: Gear reducers can be equipped with overload protection mechanisms, such as shear pins or torque sensors. These mechanisms detect excessive torque and disengage the drive temporarily, allowing the system to absorb the shock or adjust to the sudden torque change.
5. Proper Lubrication: Adequate lubrication is essential for managing shock loads and sudden torque changes. High-quality lubricants reduce friction and wear, helping the gear reducer withstand dynamic forces and maintain smooth operation.
6. Dynamic Load Distribution: Gear reducers distribute dynamic loads across multiple gear teeth, which helps prevent localized stress concentrations. This feature minimizes the risk of tooth breakage and gear damage when subjected to sudden changes in torque.
By incorporating these design features and mechanisms, gear reducers can effectively handle shock loads and sudden changes in torque, ensuring the longevity and reliability of various industrial and mechanical systems.
What industries and machinery commonly utilize gear reducers?
Gear reducers are widely used across various industries and types of machinery for torque reduction and speed control. Some common industries and applications include:
- 1. Manufacturing: Gear reducers are used in manufacturing equipment such as conveyors, mixers, and packaging machines to control speed and transmit power efficiently.
- 2. Automotive: They are utilized in vehicles for applications like power transmission in transmissions and differentials.
- 3. Aerospace: Gear reducers are used in aircraft systems, including landing gear mechanisms and engine accessories.
- 4. Robotics and Automation: They play a crucial role in robotic arms, CNC machines, and automated production lines.
- 5. Mining and Construction: Gear reducers are used in heavy machinery like excavators, bulldozers, and crushers for power transmission and torque multiplication.
- 6. Energy and Power Generation: Wind turbines, hydroelectric generators, and other power generation equipment use gear reducers to convert rotational speed and transmit power.
- 7. Marine and Shipbuilding: They are used in ship propulsion systems, steering mechanisms, and anchor handling equipment.
- 8. Material Handling: Gear reducers are essential in conveyor systems, elevators, and hoists for controlled movement of materials.
- 9. Food and Beverage: They find applications in food processing equipment like mixers, grinders, and packaging machines.
- 10. Paper and Pulp: Gear reducers are used in machinery for pulp processing, paper production, and printing.
These examples represent just a fraction of the industries and machinery that benefit from the use of gear reducers to optimize power transmission and achieve the desired motion characteristics.
editor by CX 2024-02-12
