Περιγραφή προϊόντος
We are a factory specialized in metal parts hardware & metal gearbox geared motor through powder metallurgy process .We services with ODM/OEM gearbox design and development , gearmotors manufacture.
A planetary gearbox is a gearbox with the input shaft and output shaft aligned it offers high torque transmission with good stiffness and low noise , in a more compact foot print than other gearbox types . It can supply a lot of speed reduction and torque in a small package with the fixed axis .Gearbox is ensure that it provides highly accurate gear engagement, smooth running and minimum noise and give the ability to increase the torque and lower the speed of an electric motor.
A planetary gear set is made up of 3 types of gears , a sun gear , planet gears and a ring gear . The sun gear at high speed is located at the center of the gears , and transmits torque to the planet gears which are typically mounted on the moveable carrier .The planet gears around the central axis rotation ,mesh with the sun gear and an outer ring gear . As all the planet carriers turns , it delivers low-speed, high-torque output .
Straight gears and racks are the classical components for mechanical transmission of rotary and transverse movements between moving parts of machines. This explains why these components are so widespread and are used to such a large extent in various sectors of general mechanics such that in practice it is impossible to find a rigid type power transfer drive chain which does not adopt these basic components.
Description:
Product Name : OEM 38mm low speed high torque geared motor / Speed reducer / steel gearbox,powder transmission gear ,speed reducer
Gearbox Type: Planetary
Material: Steel
Gear backlash: ≤2°
Bearing:Porous Bearing ,Rolling bearing
Radial loading on output shaft:≤ 30 N
Gear Ratio : 5:1 , 10:1 , 20:1 , 25:1 , 30:1 , 40:1 , 50:1 , 60:1 ,70:1…100:1… optional
Gearbox diameter : 8mm , 12mm , 16mm , 22mm , 24mm ,28mm, 32mm ,36mm, 38mm , 42mm ……
3V , 6V ,12V ,24V available .
High Torque Brushed/Brushless/Stepper/AC Motor Usage Planetary Gearbox/Gear Reducer.
Planetary Gearbox advantages:
- Provides high torque at slow speeds .
- The shafts are made up of hardened and tempered alloy steel .
- Sun gears ,planet gears and ring gears are made of powder metallurgy and sintering steel .
- Low noise levels.
- Good quality taper roller bearings for input and output shafts .
- High efficiency .
- Increased repeatability . Its Its greater speed radial and axial load offers reliability and robustness, minimizing the misalignment of the gear. In addition, uniform transmission and low vibrations at different loads provide a perfect repeatability.
- Perfect precision: Most rotating angular stability improves the accuracy and reliability of the movement.
- Lower noise level because there is more surface contact. Rolling is much softer and jumps are virtually nonexistent.
- Greater durability: Due to its torsional rigidity and better rolling. To improve this feature, your bearings help reduce the losses that would occur by rubbing the shaft on the box directly. Thus, greater efficiency of the gear and a much smoother operation is achieved.
- Increased torque transmission: With more teeth in contact, the mechanism is able to transmit and withstand more torque. In addition, it does it in a more uniform manner.
- Very good levels of efficiency: Planetary reducers offer greater efficiency and thanks to its design and internal layout losses are minimized during their work. In fact, today, this type of drive mechanisms are those that offer greater efficiency.
- Maximum versatility: Its mechanism is contained in a cylindrical gearbox, which can be installed in almost any space.
Εφαρμογή:
monitor,automatic vending machine,automatic cruise control,door lock actuator, retractable rearview mirror, meters, optic axis control device, head light beam level adjuster,printers,conditioning damper actuator,Car tail gate electric putter,tooth brush,vibrator, sanitary ware,coffee machine,Sweeping robot,toys etc.
Custom geared motors , planet gears , metal gearbox
Welcome OEM ODM projects .
Workshop
| Εφαρμογή: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Σκληρότητα: | Σκληρυμένη επιφάνεια δοντιού |
| Εγκατάσταση: | Κάθετος τύπος |
| Σχέδιο: | Coaxial |
| Gear Shape: | Cylindrical Gear |
| Βήμα: | Διπλό βήμα |
| Δείγματα: |
US$ 10/Piece
1 τεμάχιο (ελάχιστη παραγγελία) | |
|---|
| Προσαρμογή: |
Διαθέσιμος
| Προσαρμοσμένο Αίτημα |
|---|
Ποιες είναι οι παράμετροι που πρέπει να λαμβάνονται υπόψη για την επιλογή του κατάλληλου λιπαντικού για μειωτήρες ταχυτήτων;
Η επιλογή του κατάλληλου λιπαντικού για τους μειωτήρες ταχυτήτων είναι ζωτικής σημασίας για την εξασφάλιση βέλτιστης απόδοσης, μακροζωίας και αποδοτικότητας. Κατά την επιλογή του σωστού λιπαντικού, πρέπει να λαμβάνονται υπόψη αρκετές παράμετροι:
1. Φορτίο και ροπή: Το μέγεθος του φορτίου και της ροπής που μεταδίδεται από τον μειωτήρα ταχυτήτων επηρεάζει το ιξώδες και τις απαιτήσεις αντοχής της μεμβράνης του λιπαντικού. Τα βαρύτερα φορτία ενδέχεται να απαιτούν λιπαντικά υψηλότερου ιξώδους.
2. Ταχύτητα λειτουργίας: Η ταχύτητα με την οποία λειτουργεί ο μειωτήρας ταχυτήτων επηρεάζει την ικανότητα του λιπαντικού να διατηρεί μια συνεπή και προστατευτική μεμβράνη μεταξύ των επιφανειών του γραναζιού.
3. Εύρος θερμοκρασίας: Λάβετε υπόψη το εύρος θερμοκρασίας του περιβάλλοντος λειτουργίας. Τα λιπαντικά με κατάλληλους δείκτες ιξώδους είναι ζωτικής σημασίας για τη διατήρηση της απόδοσης υπό μεταβαλλόμενες συνθήκες θερμοκρασίας.
4. Έκθεση σε μολυσματικούς παράγοντες: Εάν ο μειωτήρας ταχυτήτων εκτίθεται σε σκόνη, βρωμιά, νερό ή άλλους ρύπους, η λίπανση θα πρέπει να έχει κατάλληλες ιδιότητες στεγανοποίησης και αντοχή στη μόλυνση.
5. Διάστημα λίπανσης: Προσδιορίστε το επιθυμητό διάστημα συντήρησης. Ορισμένα λιπαντικά απαιτούν συχνότερη αντικατάσταση, ενώ άλλα προσφέρουν εκτεταμένες περιόδους λειτουργίας.
6. Συμβατότητα με υλικά: Βεβαιωθείτε ότι το επιλεγμένο λιπαντικό είναι συμβατό με τα υλικά που χρησιμοποιούνται στον μειωτήρα ταχυτήτων, συμπεριλαμβανομένων των γραναζιών, των ρουλεμάν και των στεγανοποιήσεων.
7. Θόρυβος και κραδασμοί: Ορισμένα λιπαντικά έχουν ιδιότητες που μπορούν να βοηθήσουν στη μείωση του θορύβου και στην απόσβεση των κραδασμών, βελτιώνοντας τη συνολική εμπειρία χρήστη.
8. Περιβαλλοντικές επιπτώσεις: Λάβετε υπόψη τους περιβαλλοντικούς κανονισμούς και τους στόχους βιωσιμότητας κατά την επιλογή λιπαντικών.
9. Συστάσεις κατασκευαστή: Ακολουθήστε τις συστάσεις και τις οδηγίες του κατασκευαστή σχετικά με τον τύπο λίπανσης, τον βαθμό ιξώδους και τα διαστήματα συντήρησης.
10. Παρακολούθηση και Ανάλυση: Εφαρμόστε ένα πρόγραμμα παρακολούθησης και ανάλυσης λίπανσης για την αξιολόγηση της κατάστασης και της απόδοσης του λιπαντικού με την πάροδο του χρόνου.
Αξιολογώντας προσεκτικά αυτές τις παραμέτρους και συμβουλευόμενοι ειδικούς λίπανσης, οι βιομηχανίες μπορούν να επιλέξουν το καταλληλότερο λιπαντικό για τους μειωτήρες ταχυτήτων τους, εξασφαλίζοντας αξιόπιστη και αποτελεσματική λειτουργία.
What role do gear ratios play in optimizing the performance of gear reducers?
Gear ratios play a crucial role in optimizing the performance of gear reducers by determining the relationship between input and output speeds and torques. A gear ratio is the ratio of the number of teeth between two meshing gears, and it directly influences the mechanical advantage and efficiency of the gear reducer.
1. Speed and Torque Conversion: Gear ratios allow gear reducers to convert rotational speed and torque according to the needs of a specific application. By selecting appropriate gear ratios, gear reducers can either reduce speed while increasing torque (speed reduction) or increase speed while decreasing torque (speed increase).
2. Mechanical Advantage: Gear reducers leverage gear ratios to provide mechanical advantage. In speed reduction configurations, a higher gear ratio results in a greater mechanical advantage, allowing the output shaft to deliver higher torque at a lower speed. This is beneficial for applications requiring increased force or torque, such as heavy machinery or conveyor systems.
3. Efficiency: Optimal gear ratios contribute to higher efficiency in gear reducers. By distributing the load across multiple gear teeth, gear reducers with suitable gear ratios minimize stress and wear on individual gear teeth, leading to improved overall efficiency and prolonged lifespan.
4. Speed Matching: Gear ratios enable gear reducers to match the rotational speeds of input and output shafts. This is crucial in applications where precise speed synchronization is required, such as in conveyors, robotics, and manufacturing processes.
When selecting gear ratios for a gear reducer, it’s important to consider the specific requirements of the application, including desired speed, torque, efficiency, and mechanical advantage. Properly chosen gear ratios enhance the overall performance and reliability of gear reducers in a wide range of industrial and mechanical systems.
Can you explain the different types of gear reducers available in the market?
There are several types of gear reducers commonly used in industrial applications:
1. Spur Gear Reducers: These reducers have straight teeth and are cost-effective for applications requiring moderate torque and speed reduction. They are efficient but may produce more noise compared to other types.
2. Helical Gear Reducers: Helical gears have angled teeth, which provide smoother and quieter operation compared to spur gears. They offer higher torque capacities and are suitable for heavy-duty applications.
3. Bevel Gear Reducers: Bevel gears have conical shapes and intersect at an angle, allowing them to transmit power between non-parallel shafts. They are commonly used in applications where shafts intersect at 90 degrees.
4. Worm Gear Reducers: Worm gears consist of a worm (screw) and a mating gear (worm wheel). They offer high torque reduction and are used for applications requiring high ratios, although they can be less efficient.
5. Planetary Gear Reducers: These reducers use a system of planetary gears to achieve high torque output in a compact design. They provide excellent torque multiplication and are commonly used in robotics and automation.
6. Cycloidal Gear Reducers: Cycloidal drives use an eccentric cam to achieve speed reduction. They offer high shock load resistance and are suitable for applications with frequent starting and stopping.
7. Harmonic Drive Reducers: Harmonic drives use a flexible spline to achieve high gear reduction ratios. They provide high precision and are commonly used in applications requiring accurate positioning.
8. Hypoid Gear Reducers: Hypoid gears have helical teeth and non-intersecting shafts, making them suitable for applications with space limitations. They offer high torque and efficiency.
Each type of gear reducer has its own advantages and limitations, and the choice depends on factors such as torque requirements, speed ratios, noise levels, space constraints, and application-specific needs.
editor by CX 2023-09-08
