Descripción del Producto
Cylindrical gear reducer (JB/T8853-2001) and bevel gear reducer (JB/T9002-1999) is XIHU (WEST LAKE) DIS.ANG the 2 series of hard tooth surface gear products, tooth surface with low carbon alloy steel hardening, grinding, has a large carrying capacity, high transmission efficiency, reliable operation, long service life, etc. Be applicable to the metallurgical, mining, transport, cement, construction, chemical industry, textile, light industry, etc.
Working conditions shall meet the following requirements:
- highest input shaft speed is not more than 1500 RPM.
- the gear meshing linear speed is not more than 25 m/s;
- working environment temperature was minus 40 ~ 50 ºC.When working environment temperature is lower than 0 ºC, before the start of lubricating oil must be heated to 0 ºC and above. When the working environment temperature is higher than 45 ºC, heat insulation and cooling measures must be taken.
Model: ZSY280
Ratio: 7.6~67
Input speed(rpm): 750, 1000, 1500(could be changed according to customer)
Center distance(mm): 280
| Solicitud: | Machinery |
|---|---|
| Dureza: | Superficie del diente endurecida |
| Instalación: | Tipo horizontal |
| Gear Shape: | Cylindrical Gear |
| Paso: | Three-Step |
| Tipo: | Gear Reducer |
Can gear reducers be customized for specific industrial needs and requirements?
Yes, gear reducers can be customized to meet specific industrial needs and requirements. Manufacturers offer customization options to ensure that gear reducers are tailored to the unique demands of various applications:
1. Gear Ratio Selection: Gear reducers can be designed with specific gear ratios to achieve the desired speed reduction or increase, catering to the specific requirements of the machinery or equipment.
2. Shaft Configurations: Gear reducers can be configured with different shaft sizes, lengths, and orientations to fit seamlessly into existing systems or accommodate specific mounting arrangements.
3. Torque Capacity: Customized gear reducers can be designed to handle higher or lower torque loads based on the application’s operational requirements.
4. Environmental Considerations: Gear reducers can be customized with special coatings, materials, or seals to withstand harsh environments, extreme temperatures, or corrosive conditions.
5. Noise and Vibration Reduction: Custom designs can incorporate features to reduce noise and dampen vibrations, enhancing the overall operation and user experience.
6. Mounting and Connection Options: Manufacturers can adapt gear reducer designs to include specific mounting interfaces or connection methods that align with the equipment’s design.
7. Lubrication and Maintenance: Customized gear reducers can include features for easy maintenance, such as accessible lubrication points or monitoring systems.
8. Integration with Controls: Gear reducers can be customized to integrate seamlessly with control systems, sensors, or automation processes, enhancing system efficiency and performance.
By collaborating with manufacturers and providing detailed specifications, industries can obtain tailor-made gear reducers that address their specific operational needs and contribute to the success of their applications.
| Personalización: |
Disponible
| Solicitud personalizada |
|---|
¿Cuáles son los beneficios de utilizar un reductor de engranajes en aplicaciones industriales?
Los reductores de engranajes ofrecen varias ventajas que los hacen indispensables en diversas aplicaciones industriales:
1. Reducción de velocidad: Los reductores de engranajes permiten reducir la entrada de alta velocidad de motores o motores a velocidades de salida más bajas y utilizables para aplicaciones específicas, lo que garantiza el funcionamiento y la seguridad adecuados del equipo.
2. Aumento del par: Al aprovechar la ventaja mecánica de las relaciones de engranajes, los reductores de engranajes pueden aumentar significativamente la salida de torque, lo que permite manipular cargas pesadas y proporcionar la potencia necesaria para tareas como elevación, transporte y procesamiento.
3. Precise Cont
Can gear reducers be used for both speed reduction and speed increase?
Yes, gear reducers can be utilized for both speed reduction and speed increase, depending on their design and arrangement. The functionality to either decrease or increase rotational speed is achieved by altering the arrangement of gears within the gearbox.
1. Reducción de velocidad: In speed reduction applications, a gear reducer is designed with gears of different sizes. The input shaft connects to a larger gear, while the output shaft is connected to a smaller gear. As the input shaft rotates, the larger gear turns the smaller gear, resulting in a decrease in output speed compared to the input speed. This configuration provides higher torque output at a lower speed, making it suitable for applications that require increased force or torque.
2. Speed Increase: For speed increase, the gear arrangement is reversed. The input shaft connects to a smaller gear, while the output shaft is connected to a larger gear. As the input shaft rotates, the smaller gear drives the larger gear, resulting in an increase in output speed compared to the input speed. However, the torque output is lower than that of speed reduction configurations.
By choosing the appropriate gear ratios and arrangement, gear reducers can be customized to meet specific speed and torque requirements for various industrial applications. It’s important to select the right type of gear reducer and configure it correctly to achieve the desired speed reduction or speed increase.
rol: Los reductores de engranajes permiten un ajuste fino de la velocidad de rotación y el torque, proporcionando un control preciso sobre la maquinaria y los procesos, lo cual es crucial en industrias como la fabricación, el manejo de materiales y la robótica.
4. Absorción de carga de impacto: Los reductores de engranajes pueden absorber y amortiguar golpes repentinos o cambios en la carga, protegiendo tanto la maquinaria como los componentes conectados de fuerzas abruptas que de otro modo podrían provocar daños.
5. Versatilidad: Con varios tipos de engranajes (por ejemplo, rectos, helicoidales, sin fin) y diseños, los reductores de engranajes se pueden adaptar a diferentes aplicaciones, incluidas aquellas que requieren relaciones de velocidad, rangos de torque y condiciones ambientales específicos.
6. Transmisión de potencia eficiente: Los reductores de engranajes ofrecen una alta eficiencia mecánica, minimizando la pérdida de energía durante la transmisión de potencia, lo que es especialmente valioso en industrias conscientes del consumo energético.
7. Diseño compacto: Los reductores de engranajes proporcionan una solución compacta para transmitir potencia y ajustar velocidades, lo que los hace adecuados para instalaciones con limitaciones de espacio.
8. Confiabilidad y longevidad: Los reductores de engranajes bien diseñados y mantenidos adecuadamente pueden ofrecer una vida útil más prolongada, lo que contribuye a reducir el tiempo de inactividad y los costos de mantenimiento.
En general, los reductores de engranajes mejoran el rendimiento, la eficiencia y la confiabilidad de los equipos industriales, lo que los convierte en componentes esenciales en una amplia gama de aplicaciones en diversas industrias.
editor by CX 2023-08-15
