Descripción del Producto
Heavy load worm drive slewing gear reduction for mounted truck crane drilling rig,excavator and other rotation slewing drive
Coresun Drive slewing drives worm gear can be widely used for grapple machines, Aerial platform, forklift ,mobile crane ,Drilling Rig ,solar tracking system, wind turbine and satellite dish.Those products are designed for long life, working in hard environmental conditions.Hourglass worm shaft is used in each sized slewing drive for better efficiency, more torque and smoother rotation by multiple tooth contact with the slewing rings
Slewing drives are perfect for situations requiring both load-holding and rotational torque from the same gearbox.Ttypical applications include solar trackers, wind turbines, satellite and radar dishes, truck cranes, man lifts, utility equipment, hydraulic equipment attachments, oil tool equipment, tire handlers, digger derricks, and automotive lifts.
This increased tooth engagement results in greater strength, efficiency and durability.The slewing drive uses standard worm technology in which the worm on the horizontal The speed ratio of the shaft depends on the relationship between the number of threads on the worm and the number of teeth in the worm gear or gear.The specifications of the drive and gear depend on the material of the gear. However, most of the drives and gears typically used consist of steel and phosphor bronze. According to a wide range of tests,chilled nickel-phosphorus bronze ranks first in terms of Wear resistance and deformability
WH series for heavy duty rotary drive.The surface adopts QPQ treatment process, which can not only increase the surface hardness of the product, but also ensure its wear resistance and corrosion resistance.
On the basis of the original product, 8 bolts are added at both ends of the worm to effectively prevent the worm from being pulled out due to the excessive axial impact force.
Different from the traditional 42CrMo worm material, carbon steel is added to ensure that the worm can bear the input torque of 600-1000N. M
WH14 slewing drive rotary table is widely used in aerial work platform, roadheader, rotating equipment and automatic assembly line.
Product Advantage
Worm gear slewing drive and worm structure is often used to transfer motion and power between 2 staggered shafts.Worm gear and worm in the middle plane is equivalent to gear and rack, worm and screw shape is similar.
Mechanism characteristics
1. Large transmission ratio can be obtained, which is more compact than the staggered helical gear mechanism.
2. The meshing surfaces of the 2 wheels are in line contact, and the bearing capacity is much higher than that of the staggered shaft helical gear mechanism.
3. Worm drive is equivalent to spiral drive, multi-tooth meshing drive, so the drive is stable and has little noise.
4. Self-locking.When the leading Angle of the worm is less than the equivalent friction Angle between the meshing gears, the mechanism has self-locking property, and can realize reverse self-locking, that is, only the worm drives the worm, but not by the worm wheel drives the worm.Such as in the lifting of the use of self-locking worm mechanism, its reverse self-locking can play a role in safety protection.
1, What are the differentiates between CHINAMFG with other supplier?
Profession and reliability.
Our advantages are multiple available technologies, strong quality assurance, and good at project & supply chain management.
2, Is there a cost for CHINAMFG service?
There is no additional cost above the product and tooling price except third party service.
3, Will I be able to visit the supplier myself?
First, all of our supply partner has undergone a series of screening and audit process, we can provide complete audit report to you.
Secondly, if you want to perform your own independent supplier audit procedure, our representatives can accompany and assistant with you to achieve it.
4, How to deal with the quality problem?
A. With our partners we perfom APQP at early stage in each project.
B. Our factory must fully understand the quality concerns from customers and implement product & process quality requirements.
C. Our quality professionals who perfom patrol inspection in our factories.
We perform final inspectors before the goods are packed.
5, Can you take responsibility for me?
Of course, I’m happy to help you! But I just take responsitility fo my products.
Please offer a test report.
If it was our fault, absolutely we can make a compensation for you, my friend!
6, Do you like to serve the client only with small order?
We enjoy to grow up together with all our clients whatever big or small.
Your will become bigger and bigger to be with us.
Coresun Drive Slewing Bearing Production Photo
Coresun Drive testing reports for WH products
For CHINAMFG Drive’s slewing drive worm bearing, raw material testing, process testing, finished product testing should be made for ensuring the 100% quality production.
CONTACT US
It is sincerely looking CHINAMFG to cooperating with you for and providing you the best quality product & service with all of our heart!
/* 10 de marzo de 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Holding Torque: | 48kn.M |
|---|---|
| Tilting Moment Torque: | 72kn.M |
| Output Torque: | 6.8kn.M |
| Output Speed: | 2.1rpm |
| Gear Ratio: | 84:1 |
| IP Class: | IP65 |
| Personalización: |
Disponible
| Solicitud personalizada |
|---|
How do gear reducers contribute to energy efficiency in machinery and equipment?
Gear reducers play a significant role in enhancing energy efficiency in various machinery and equipment. Here’s how they contribute:
1. Reducción de velocidad: Gear reducers are commonly used to reduce the speed of the input shaft, allowing the motor to operate at a higher speed where it’s most efficient. This speed reduction helps match the motor’s optimal operating range, reducing energy consumption.
2. Aumento del par: Gear reducers can increase torque output while decreasing speed, enabling machinery to handle higher loads without the need for a larger, more energy-intensive motor.
3. Matching Load Requirements: By adjusting gear ratios, gear reducers ensure that the machinery’s output speed and torque match the load requirements. This prevents the motor from operating at unnecessary high speeds, saving energy.
4. Variable Speed Applications: In applications requiring variable speeds, gear reducers allow for efficient speed control without the need for continuous motor adjustments, improving energy usage.
5. Efficient Power Transmission: Gear reducers efficiently transmit power from the motor to the load, minimizing energy losses due to friction and inefficiencies.
6. Motor Downsizing: Gear reducers enable the use of smaller, more energy-efficient motors by converting their higher speed, lower torque output into the lower speed, higher torque needed for the application.
7. Decoupling Motor and Load Speeds: In cases where the motor and load speeds are inherently different, gear reducers ensure the motor operates at its most efficient speed while still delivering the required output to the load.
8. Overcoming Inertia: Gear reducers help overcome the inertia of heavy loads, making it easier for motors to start and stop, reducing energy consumption during frequent operation.
9. Precise Control: Gear reducers provide precise control over speed and torque, optimizing the energy consumption of machinery in processes that require accurate adjustments.
10. Regenerative Braking: In some applications, gear reducers can be used to capture and convert kinetic energy back into electrical energy during braking or deceleration, improving overall energy efficiency.
By efficiently managing speed, torque, and power transmission, gear reducers contribute to energy-efficient operation, reducing energy consumption, and minimizing the environmental impact of machinery and equipment.
What maintenance practices are essential for prolonging the lifespan of gear reducers?
Proper maintenance is crucial for extending the lifespan and ensuring optimal performance of gear reducers. Here are essential maintenance practices:
- 1. Lubrication: Regular lubrication of gear reducers is vital to reduce friction, wear, and heat generation. Use the recommended lubricant and follow the manufacturer’s guidelines for lubrication intervals.
- 2. Inspection: Routinely inspect gear reducers for signs of wear, damage, or leaks. Check for unusual noises, vibrations, or temperature increases during operation.
- 3. Alignment: Ensure proper alignment of the input and output shafts. Misalignment can lead to increased wear, noise, and reduced efficiency. Align the components according to the manufacturer’s specifications.
- 4. Cooling and Ventilation: Maintain proper cooling and ventilation to prevent overheating. Ensure that cooling fans and vents are clean and unobstructed.
- 5. Seal Maintenance: Inspect and replace seals as needed to prevent contaminants from entering the gear reducer. Contaminants can lead to accelerated wear and reduced performance.
- 6. Bolts and Fasteners: Regularly check and tighten bolts and fasteners to prevent loosening during operation, which can cause misalignment or component damage.
- 7. Replacing Worn Components: Replace worn or damaged components, such as gears, bearings, and seals, with genuine parts from the manufacturer.
- 8. Vibration Analysis: Conduct periodic vibration analysis to identify potential issues early. Excessive vibration can indicate misalignment or component wear.
- 9. Maintenance Records: Keep detailed maintenance records, including lubrication schedules, inspection dates, and component replacements. This helps track the history of the gear reducer and aids in future maintenance planning.
- 10. Training: Provide proper training to maintenance personnel on gear reducer maintenance and troubleshooting techniques.
By adhering to these maintenance practices, you can maximize the lifespan of your gear reducers, minimize downtime, and ensure reliable operation in your industrial processes.
¿Cuáles son los beneficios de utilizar un reductor de engranajes en aplicaciones industriales?
Los reductores de engranajes ofrecen varias ventajas que los hacen indispensables en diversas aplicaciones industriales:
1. Reducción de velocidad: Los reductores de engranajes permiten reducir la entrada de alta velocidad de motores o motores a velocidades de salida más bajas y utilizables para aplicaciones específicas, lo que garantiza el funcionamiento y la seguridad adecuados del equipo.
2. Aumento del par: Al aprovechar la ventaja mecánica de las relaciones de engranajes, los reductores de engranajes pueden aumentar significativamente la salida de torque, lo que permite manipular cargas pesadas y proporcionar la potencia necesaria para tareas como elevación, transporte y procesamiento.
3. Control preciso: Los reductores de engranajes permiten un ajuste fino de la velocidad de rotación y el torque, proporcionando un control preciso sobre la maquinaria y los procesos, lo cual es crucial en industrias como la fabricación, el manejo de materiales y la robótica.
4. Absorción de carga de impacto: Los reductores de engranajes pueden absorber y amortiguar golpes repentinos o cambios en la carga, protegiendo tanto la maquinaria como los componentes conectados de fuerzas abruptas que de otro modo podrían provocar daños.
5. Versatilidad: Con varios tipos de engranajes (por ejemplo, rectos, helicoidales, sin fin) y diseños, los reductores de engranajes se pueden adaptar a diferentes aplicaciones, incluidas aquellas que requieren relaciones de velocidad, rangos de torque y condiciones ambientales específicos.
6. Transmisión de potencia eficiente: Los reductores de engranajes ofrecen una alta eficiencia mecánica, minimizando la pérdida de energía durante la transmisión de potencia, lo que es especialmente valioso en industrias conscientes del consumo energético.
7. Diseño compacto: Los reductores de engranajes proporcionan una solución compacta para transmitir potencia y ajustar velocidades, lo que los hace adecuados para instalaciones con limitaciones de espacio.
8. Confiabilidad y longevidad: Los reductores de engranajes bien diseñados y mantenidos adecuadamente pueden ofrecer una vida útil más prolongada, lo que contribuye a reducir el tiempo de inactividad y los costos de mantenimiento.
En general, los reductores de engranajes mejoran el rendimiento, la eficiencia y la confiabilidad de los equipos industriales, lo que los convierte en componentes esenciales en una amplia gama de aplicaciones en diversas industrias.
editor by CX 2024-02-07
