Description du produit
PLANETX planetary reduce
Planetary reducer square flange:
Planetary reducer is widely used in industrial products due to its small size, light weight, large torque, wide speed ratio range, high rigidity, high precision, high transmission efficiency, maintenance free and other characteristics.
The planetary reducer structure is composed of a sun gear and a planet gear to form an external mesh, and a planet gear and an internal gear ring to form an internal mesh, so that the planet gear can realize revolution while realizing self rotation and maximum transmission of guarantee force; The minimum speed ratio of single-stage reduction is 3, and the maximum speed ratio is generally not more than 10. Common reduction ratios are 3, 4, 5, 6, 7, 8, and 10. The number of reducer stages is generally not more than 3, and the speed ratio is not more than 1.
Most planetary reducers are used with servo motors to reduce speed, increase torque, increase inertia, and ensure return accuracy (the higher the return accuracy, the higher the price). The maximum rated input speed of planetary reducers can reach 12000 rpm (depending on the size of the reducer itself, the larger the reducer, the smaller the rated input speed), and the operating temperature is generally between – 40 ºC and 120 ºC.
High Performance Planetary Gear Motor Precision Speed Reducer WAB060 Design Planetary Gearbox
1.Planetary carrier and output shaft are intergrated structure to ensure maximum torsional rigidity. 2.Planetary wheel with full needle design, increase the contact area to improve the rigidity and output torque. 3.The Gear adopts low carbon alloy steel, through carburizing and quenching, surface hardness is HRC62, anti-impact and strong abrasion resistance. 4.Gears refer to foreign imported software-assisted design to obtain the best tooth shape to reduce noise. 5.The input terminal is connected to the motor shaft in a double-tight manner to obtain the maximum clamping force and zero backlash power transmission. 6.Adopt spiral bevel gear design, allow high output torque, more than 30% higher than straight bevel gear. 7.High tolerance input speed, more than 8 times higher than straight bevel gear input. 8.The meshing tooth imprint of spiral bevel gear has been optimized by optimum design, and the contact tooth surface load is uniform, and long running life. 9.Bevel gears are meshed by optimum motion error analysis and strict process control to ensure high precision running backlash. 10.IP65, anti-dust, anti-water; low backlash, <3arcmin; low noise, <58dB 11.high efficiency(96%);Gear grinding process;easy motor mounting;life-time lubrication;various figure diameters.
Q: How to get a quick quote
A: Please provide the following information when contacting us
- Motor brand
- Motor model
- Motor dimension drawing
- What is the gear ratio
Q: How long is your delivery date
A: We all install it now, but it takes 3-5 days if it is not non-standard. Non standard 10-15 days, depending on the specific situation
Q:Do you provide samples, free or extra
A: A: You can reserve 1 first, and purchase it on demand
| Application: | Machinery |
|---|---|
| Dureté: | Surface dentaire durcie |
| Installation: | Any |
| Mise en page: | Coaxial |
| Gear Shape: | Cylindrical Gear |
| Étape: | 1-3 |
| Personnalisation : |
Disponible
| Demande personnalisée |
|---|
Can you provide real-world examples of products that use gear reducer technology?
Certainly! Gear reducer technology is widely used in various industries and products to enhance performance and efficiency. Here are some real-world examples:
1. Industrial Machinery: Gear reducers are commonly used in manufacturing machinery, such as conveyor systems, material handling equipment, and assembly lines, where they help control speed and torque for precise operations.
2. Wind Turbines: Wind turbines utilize gear reducers to transform the low rotational speed of the wind turbine rotor into the higher speed needed for electricity generation, optimizing energy conversion.
3. Automotive Transmissions: Automobiles use gear reducers as part of their transmissions to optimize power delivery from the engine to the wheels, allowing the vehicle to operate efficiently at different speeds.
4. Robotics: Robotic systems rely on gear reducers to control the movement and articulation of robot arms, enabling precise and controlled motion for various applications.
5. Printing Presses: Gear reducers are integral to printing presses, ensuring accurate and synchronized movement of printing plates, rollers, and paper feed mechanisms.
6. Conveyor Belts: Conveyor systems in industries like mining, agriculture, and logistics use gear reducers to regulate the movement of materials along the conveyor belts.
7. Packaging Machinery: Gear reducers play a crucial role in packaging machines, controlling the speed and movement of packaging materials, filling mechanisms, and sealing components.
8. Cranes and Hoists: Cranes and hoists rely on gear reducers to lift heavy loads with precision and control, ensuring safe and efficient material handling.
9. Pumps and Compressors: Gear reducers are utilized in pumps and compressors to regulate fluid flow and pressure, optimizing energy usage in fluid transportation systems.
10. Agriculture Equipment: Tractors and other agricultural machinery use gear reducers to adjust the speed and power delivery for different tasks, such as plowing, planting, and harvesting.
These examples demonstrate the diverse applications of gear reducer technology across various industries, showcasing their role in enhancing efficiency, control, and performance in a wide range of products and systems.
What maintenance practices are essential for prolonging the lifespan of gear reducers?
Proper maintenance is crucial for extending the lifespan and ensuring optimal performance of gear reducers. Here are essential maintenance practices:
- 1. Lubrication: Regular lubrication of gear reducers is vital to reduce friction, wear, and heat generation. Use the recommended lubricant and follow the manufacturer’s guidelines for lubrication intervals.
- 2. Inspection: Routinely inspect gear reducers for signs of wear, damage, or leaks. Check for unusual noises, vibrations, or temperature increases during operation.
- 3. Alignment: Ensure proper alignment of the input and output shafts. Misalignment can lead to increased wear, noise, and reduced efficiency. Align the components according to the manufacturer’s specifications.
- 4. Cooling and Ventilation: Maintain proper cooling and ventilation to prevent overheating. Ensure that cooling fans and vents are clean and unobstructed.
- 5. Seal Maintenance: Inspect and replace seals as needed to prevent contaminants from entering the gear reducer. Contaminants can lead to accelerated wear and reduced performance.
- 6. Bolts and Fasteners: Regularly check and tighten bolts and fasteners to prevent loosening during operation, which can cause misalignment or component damage.
- 7. Replacing Worn Components: Replace worn or damaged components, such as gears, bearings, and seals, with genuine parts from the manufacturer.
- 8. Vibration Analysis: Conduct periodic vibration analysis to identify potential issues early. Excessive vibration can indicate misalignment or component wear.
- 9. Maintenance Records: Keep detailed maintenance records, including lubrication schedules, inspection dates, and component replacements. This helps track the history of the gear reducer and aids in future maintenance planning.
- 10. Training: Provide proper training to maintenance personnel on gear reducer maintenance and troubleshooting techniques.
By adhering to these maintenance practices, you can maximize the lifespan of your gear reducers, minimize downtime, and ensure reliable operation in your industrial processes.
Quels sont les avantages de l'utilisation d'un réducteur à engrenages dans les applications industrielles ?
Les réducteurs de vitesse offrent plusieurs avantages qui les rendent indispensables dans diverses applications industrielles :
1. Réduction de vitesse : Les réducteurs de vitesse permettent de réduire la vitesse d'entrée élevée des moteurs à des vitesses de sortie plus basses et plus utilisables pour des applications spécifiques, garantissant ainsi le bon fonctionnement et la sécurité des équipements.
2. Augmentation du couple : En tirant parti de l'avantage mécanique des rapports d'engrenage, les réducteurs d'engrenages peuvent augmenter considérablement le couple de sortie, permettant ainsi la manutention de charges lourdes et fournissant la puissance nécessaire à des tâches telles que le levage, le transport et le traitement.
3. Contrôle précis : Les réducteurs de vitesse permettent un réglage précis de la vitesse de rotation et du couple, offrant un contrôle précis des machines et des processus, ce qui est crucial dans des secteurs comme la fabrication, la manutention et la robotique.
4. Absorption des chocs : Les réducteurs d'engrenages peuvent absorber et amortir les chocs soudains ou les variations de charge, protégeant ainsi la machine et les composants connectés des forces abruptes qui pourraient autrement entraîner des dommages.
5. Polyvalence : Grâce à différents types d'engrenages (par exemple, droits, hélicoïdaux, à vis sans fin) et à différentes conceptions, les réducteurs d'engrenages peuvent être adaptés à différentes applications, y compris celles nécessitant des rapports de vitesse, des plages de couple et des conditions environnementales spécifiques.
6. Transmission efficace de l'énergie : Les réducteurs à engrenages offrent un rendement mécanique élevé, minimisant les pertes d'énergie lors de la transmission de puissance, ce qui est particulièrement précieux dans les industries soucieuses de leur consommation d'énergie.
7. Conception compacte : Les réducteurs de vitesse offrent une solution compacte pour la transmission de puissance et le réglage des vitesses, ce qui les rend adaptés aux installations où l'espace est limité.
8. Fiabilité et longévité : Les réducteurs de vitesse bien conçus et correctement entretenus peuvent offrir une durée de vie prolongée, contribuant ainsi à réduire les temps d'arrêt et les coûts de maintenance.
De manière générale, les réducteurs de vitesse améliorent les performances, l'efficacité et la fiabilité des équipements industriels, ce qui en fait des composants essentiels dans un large éventail d'applications et dans divers secteurs d'activité.
editor by CX 2023-09-15
