Description du produit
Heavy load worm drive slewing gear reduction for mounted truck crane drilling rig,excavator and other rotation slewing drive
Coresun Drive slewing drives worm gear can be widely used for grapple machines, Aerial platform, forklift ,mobile crane ,Drilling Rig ,solar tracking system, wind turbine and satellite dish.Those products are designed for long life, working in hard environmental conditions.Hourglass worm shaft is used in each sized slewing drive for better efficiency, more torque and smoother rotation by multiple tooth contact with the slewing rings
Slewing drives are perfect for situations requiring both load-holding and rotational torque from the same gearbox.Ttypical applications include solar trackers, wind turbines, satellite and radar dishes, truck cranes, man lifts, utility equipment, hydraulic equipment attachments, oil tool equipment, tire handlers, digger derricks, and automotive lifts.
This increased tooth engagement results in greater strength, efficiency and durability.The slewing drive uses standard worm technology in which the worm on the horizontal The speed ratio of the shaft depends on the relationship between the number of threads on the worm and the number of teeth in the worm gear or gear.The specifications of the drive and gear depend on the material of the gear. However, most of the drives and gears typically used consist of steel and phosphor bronze. According to a wide range of tests,chilled nickel-phosphorus bronze ranks first in terms of Wear resistance and deformability
WH series for heavy duty rotary drive.The surface adopts QPQ treatment process, which can not only increase the surface hardness of the product, but also ensure its wear resistance and corrosion resistance.
On the basis of the original product, 8 bolts are added at both ends of the worm to effectively prevent the worm from being pulled out due to the excessive axial impact force.
Different from the traditional 42CrMo worm material, carbon steel is added to ensure that the worm can bear the input torque of 600-1000N. M
WH14 slewing drive rotary table is widely used in aerial work platform, roadheader, rotating equipment and automatic assembly line.
Product Advantage
Worm gear slewing drive and worm structure is often used to transfer motion and power between 2 staggered shafts.Worm gear and worm in the middle plane is equivalent to gear and rack, worm and screw shape is similar.
Mechanism characteristics
1. Large transmission ratio can be obtained, which is more compact than the staggered helical gear mechanism.
2. The meshing surfaces of the 2 wheels are in line contact, and the bearing capacity is much higher than that of the staggered shaft helical gear mechanism.
3. Worm drive is equivalent to spiral drive, multi-tooth meshing drive, so the drive is stable and has little noise.
4. Self-locking.When the leading Angle of the worm is less than the equivalent friction Angle between the meshing gears, the mechanism has self-locking property, and can realize reverse self-locking, that is, only the worm drives the worm, but not by the worm wheel drives the worm.Such as in the lifting of the use of self-locking worm mechanism, its reverse self-locking can play a role in safety protection.
1, What are the differentiates between CHINAMFG with other supplier?
Profession and reliability.
Our advantages are multiple available technologies, strong quality assurance, and good at project & supply chain management.
2, Is there a cost for CHINAMFG service?
There is no additional cost above the product and tooling price except third party service.
3, Will I be able to visit the supplier myself?
First, all of our supply partner has undergone a series of screening and audit process, we can provide complete audit report to you.
Secondly, if you want to perform your own independent supplier audit procedure, our representatives can accompany and assistant with you to achieve it.
4, How to deal with the quality problem?
A. With our partners we perfom APQP at early stage in each project.
B. Our factory must fully understand the quality concerns from customers and implement product & process quality requirements.
C. Our quality professionals who perfom patrol inspection in our factories.
We perform final inspectors before the goods are packed.
5, Can you take responsibility for me?
Of course, I’m happy to help you! But I just take responsitility fo my products.
Please offer a test report.
If it was our fault, absolutely we can make a compensation for you, my friend!
6, Do you like to serve the client only with small order?
We enjoy to grow up together with all our clients whatever big or small.
Your will become bigger and bigger to be with us.
Coresun Drive Slewing Bearing Production Photo
Coresun Drive testing reports for WH products
For CHINAMFG Drive’s slewing drive worm bearing, raw material testing, process testing, finished product testing should be made for ensuring the 100% quality production.
CONTACT US
It is sincerely looking CHINAMFG to cooperating with you for and providing you the best quality product & service with all of our heart!
/* 10 mars 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Holding Torque: | 48kn.M |
|---|---|
| Tilting Moment Torque: | 72kn.M |
| Output Torque: | 6.8kn.M |
| Output Speed: | 2.1rpm |
| Gear Ratio: | 84:1 |
| IP Class: | IP65 |
| Personnalisation : |
Disponible
| Demande personnalisée |
|---|
How do gear reducers contribute to energy efficiency in machinery and equipment?
Gear reducers play a significant role in enhancing energy efficiency in various machinery and equipment. Here’s how they contribute:
1. Réduction de vitesse : Gear reducers are commonly used to reduce the speed of the input shaft, allowing the motor to operate at a higher speed where it’s most efficient. This speed reduction helps match the motor’s optimal operating range, reducing energy consumption.
2. Augmentation du couple : Gear reducers can increase torque output while decreasing speed, enabling machinery to handle higher loads without the need for a larger, more energy-intensive motor.
3. Matching Load Requirements: By adjusting gear ratios, gear reducers ensure that the machinery’s output speed and torque match the load requirements. This prevents the motor from operating at unnecessary high speeds, saving energy.
4. Variable Speed Applications: In applications requiring variable speeds, gear reducers allow for efficient speed control without the need for continuous motor adjustments, improving energy usage.
5. Efficient Power Transmission: Gear reducers efficiently transmit power from the motor to the load, minimizing energy losses due to friction and inefficiencies.
6. Motor Downsizing: Gear reducers enable the use of smaller, more energy-efficient motors by converting their higher speed, lower torque output into the lower speed, higher torque needed for the application.
7. Decoupling Motor and Load Speeds: In cases where the motor and load speeds are inherently different, gear reducers ensure the motor operates at its most efficient speed while still delivering the required output to the load.
8. Overcoming Inertia: Gear reducers help overcome the inertia of heavy loads, making it easier for motors to start and stop, reducing energy consumption during frequent operation.
9. Precise Control: Gear reducers provide precise control over speed and torque, optimizing the energy consumption of machinery in processes that require accurate adjustments.
10. Regenerative Braking: In some applications, gear reducers can be used to capture and convert kinetic energy back into electrical energy during braking or deceleration, improving overall energy efficiency.
By efficiently managing speed, torque, and power transmission, gear reducers contribute to energy-efficient operation, reducing energy consumption, and minimizing the environmental impact of machinery and equipment.
What maintenance practices are essential for prolonging the lifespan of gear reducers?
Proper maintenance is crucial for extending the lifespan and ensuring optimal performance of gear reducers. Here are essential maintenance practices:
- 1. Lubrication: Regular lubrication of gear reducers is vital to reduce friction, wear, and heat generation. Use the recommended lubricant and follow the manufacturer’s guidelines for lubrication intervals.
- 2. Inspection: Routinely inspect gear reducers for signs of wear, damage, or leaks. Check for unusual noises, vibrations, or temperature increases during operation.
- 3. Alignment: Ensure proper alignment of the input and output shafts. Misalignment can lead to increased wear, noise, and reduced efficiency. Align the components according to the manufacturer’s specifications.
- 4. Cooling and Ventilation: Maintain proper cooling and ventilation to prevent overheating. Ensure that cooling fans and vents are clean and unobstructed.
- 5. Seal Maintenance: Inspect and replace seals as needed to prevent contaminants from entering the gear reducer. Contaminants can lead to accelerated wear and reduced performance.
- 6. Bolts and Fasteners: Regularly check and tighten bolts and fasteners to prevent loosening during operation, which can cause misalignment or component damage.
- 7. Replacing Worn Components: Replace worn or damaged components, such as gears, bearings, and seals, with genuine parts from the manufacturer.
- 8. Vibration Analysis: Conduct periodic vibration analysis to identify potential issues early. Excessive vibration can indicate misalignment or component wear.
- 9. Maintenance Records: Keep detailed maintenance records, including lubrication schedules, inspection dates, and component replacements. This helps track the history of the gear reducer and aids in future maintenance planning.
- 10. Training: Provide proper training to maintenance personnel on gear reducer maintenance and troubleshooting techniques.
By adhering to these maintenance practices, you can maximize the lifespan of your gear reducers, minimize downtime, and ensure reliable operation in your industrial processes.
Quels sont les avantages de l'utilisation d'un réducteur à engrenages dans les applications industrielles ?
Les réducteurs de vitesse offrent plusieurs avantages qui les rendent indispensables dans diverses applications industrielles :
1. Réduction de vitesse : Les réducteurs de vitesse permettent de réduire la vitesse d'entrée élevée des moteurs à des vitesses de sortie plus basses et plus utilisables pour des applications spécifiques, garantissant ainsi le bon fonctionnement et la sécurité des équipements.
2. Augmentation du couple : En tirant parti de l'avantage mécanique des rapports d'engrenage, les réducteurs d'engrenages peuvent augmenter considérablement le couple de sortie, permettant ainsi la manutention de charges lourdes et fournissant la puissance nécessaire à des tâches telles que le levage, le transport et le traitement.
3. Contrôle précis : Les réducteurs de vitesse permettent un réglage précis de la vitesse de rotation et du couple, offrant un contrôle précis des machines et des processus, ce qui est crucial dans des secteurs comme la fabrication, la manutention et la robotique.
4. Absorption des chocs : Les réducteurs d'engrenages peuvent absorber et amortir les chocs soudains ou les variations de charge, protégeant ainsi la machine et les composants connectés des forces abruptes qui pourraient autrement entraîner des dommages.
5. Polyvalence : Grâce à différents types d'engrenages (par exemple, droits, hélicoïdaux, à vis sans fin) et à différentes conceptions, les réducteurs d'engrenages peuvent être adaptés à différentes applications, y compris celles nécessitant des rapports de vitesse, des plages de couple et des conditions environnementales spécifiques.
6. Transmission efficace de l'énergie : Les réducteurs à engrenages offrent un rendement mécanique élevé, minimisant les pertes d'énergie lors de la transmission de puissance, ce qui est particulièrement précieux dans les industries soucieuses de leur consommation d'énergie.
7. Conception compacte : Les réducteurs de vitesse offrent une solution compacte pour la transmission de puissance et le réglage des vitesses, ce qui les rend adaptés aux installations où l'espace est limité.
8. Fiabilité et longévité : Les réducteurs de vitesse bien conçus et correctement entretenus peuvent offrir une durée de vie prolongée, contribuant ainsi à réduire les temps d'arrêt et les coûts de maintenance.
De manière générale, les réducteurs de vitesse améliorent les performances, l'efficacité et la fiabilité des équipements industriels, ce qui en fait des composants essentiels dans un large éventail d'applications et dans divers secteurs d'activité.
editor by CX 2024-02-07
