Deskripsi Produk
Deskripsi Produk
500w planetary gear differential speed increase gearbox for textile machinery
HangZhou Fubao Electromechanical Technology Co., Ltd. speed increase gearbox
is a new generation of practical products independently developed by our company
Low noise: less than 65db.
Low back clearance: up to 3 arc minutes in a CZPT and 5 arc minutes in a double stage.
High torque: higher than the standard planetary reducer torque.
High stability: high strength alloy steel, the whole gear after hardening treatment, not only the surface hard substitution.
High deceleration ratio: Modular design, planetary gearbox can be interlinked.
speed increase gearbox characteristic:
1.Planetary reducer manufacturer-Fubao Electromechanical Technology adopts an integrated planetary carrier and output shaft, which can provide better torsional rigidity. After precision machining, the gear set is not easy to eccentric, which can reduce interference, reduce wear and noise, and at the same time use a large The bearings are arranged with a wide span to distribute the load of the bearings, and once again strengthen the torque rigidity and radial load capacity of the speed increase gearbox . The output cover is made of aluminum alloy, which provides better heat dissipation capability for the product, so that the reducer produced by Fubao Electromechanical Technology can play an excellent role in the field of mechanical tools.
2.The planetary gear set is specially made of alloy steel. First, it undergoes quenching and tempering heat treatment to make the material hardness reach HRC30 degrees, and then undergoes nitriding surface treatment to HV860, so that the product has the characteristics of high surface hardness and high toughness in the center, and achieves the best product strength and service life. optimization.
3.The input shaft and the motor output shaft are connected by a bolted structure, with a round shaft seal design, and through dynamic balance analysis, it can ensure that there is no eccentric load at high speeds. After reducing unnecessary radial force, it can effectively Reduce the load on the motor side.
4.The material of the input cover/motor connection seat is made of aluminum alloy, which can provide better heat dissipation effect, and then provide good concentricity and verticality through professional lathe processing, so that the product can be stably combined with various motors, reducing the damage caused by insufficient precision. Unnecessary axial radial force makes the product have a longer life cycle.
| WAB series parameters | Model number | WAB042 | WAB60 | WAB090 | WAB115 | WAB140 | WAB180 | WAB220 |
| Rated output torque | 14-22 | 23-60 | 48-160 | 140-330 | 342-650 | 520-1200 | 1140-2000 | |
| Reduction ratio | L1: 3, 4, 5, 6, 7, 8, 9, 10 L2: 15, 20, 25, 30, 35, 40, 50, 70, 80, 100 | |||||||
| Planetary gear backlash | L1: P0≤1 P1≤3 P2≤5 L2: P0≤3 P1≤5 P2≤7 | |||||||
Detailed Photos
Product Details
Other products
Product Advantages
Compared with other reduction machines, speed increase gearbox machines have high rigidity, high precision (single stage can be achieved within 1 point), high transmission efficiency (single stage in 97-98%), high torque/volume ratio, lifetime maintenance free and other characteristics.
Because of these characteristics, speed increase gearbox is mostly installed on the stepper motor and servo motor, used to reduce speed, increase torque, matching inertia.
Profil Perusahaan
HangZhou Fubao Electromechanical Technology Co., Ltd. was established in 2008, the company has a complete precision reducer design, production capacity. Set R & D, manufacturing, assembly and sales, more in the field of gear manufacturing has more than 10 years of background, in the manufacturing equipment is equipped with Switzerland Riesenhahl gear grinding machine, domestic Qinchuan gear grinding machine, hamai gear hobbing machine and domestic Xihu (West Lake) Dis. gear hobbing machine, Japan Yasaki TLGmazak CNC lathe, CNC milling machine and other fully CNC equipment, In addition, it is equipped with other advanced measuring equipment such as Japanese TTI gear detector, 3 coordinate measurement, reducer backlash measurement instrument and so on. In a strong manufacturing capacity at the same time, can be stable, continuous manufacturing of high-quality precision reducer products.
The precision reducer produced by our company has the characteristics of high structural rigidity, small back backlash, precise transmission and so on. It is widely used in various industries. Companies adhering to the concept of let customers participate in manufacturing, and strive to provide customers with more personalized services. In the field of precision transmission has a unique achievements. It is our CZPT pursuit to make far-reaching contributions.
Factory Display
Q: Speed reducer grease replacement time
A: When sealing appropriate amount of grease and running reducer, the standard replacement time is 20000 hours according to the aging condition of the grease. In addition, when the grease is stained or used in the surrounding temperature condition (above 40ºC), please check the aging and fouling of the grease, and specify the replacement time.
Q: Delivery time
A: Fubao has 2000+ production base, daily output of 1000+ units, standard models within 7 days of delivery.
Q: Reducer selection
A: Fubao provides professional product selection guidance, with higher product matching degree, higher cost performance and higher utilization rate.
Q: Application range of reducer
A: Fubao has a professional research and development team, complete category design, can match any stepping motor, servo motor, more accurate matching.
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
| Aplikasi: | Motor, Machinery, Agricultural Machinery, Medical Robot |
|---|---|
| Kekerasan: | Permukaan Gigi yang Mengeras |
| Instalasi: | 90 Degree |
| Kustomisasi: |
Tersedia
| Permintaan Khusus |
|---|
Impact of Gear Tooth Design and Profile on the Efficiency of Planetary Gearboxes
The design and profile of gear teeth have a significant impact on the efficiency of planetary gearboxes:
- Tooth Profile: The tooth profile, such as involute, cycloid, or modified profiles, affects the contact pattern and load distribution between gear teeth. An optimized profile minimizes stress concentration and ensures smooth meshing, contributing to higher efficiency.
- Tooth Shape: The shape of gear teeth influences the amount of sliding and rolling motion during meshing. Gear teeth designed for more rolling and less sliding motion reduce friction and wear, enhancing overall efficiency.
- Pressure Angle: The pressure angle at which gear teeth engage affects the force distribution and efficiency. Larger pressure angles can lead to higher efficiency due to improved load sharing, but they may require more space.
- Tooth Thickness and Width: Optimized tooth thickness and width contribute to distributing the load more evenly across the gear face. Proper sizing reduces stress and increases efficiency.
- Backlash: Backlash, the gap between meshing gear teeth, impacts efficiency by causing vibrations and energy losses. Properly controlled backlash minimizes these effects and improves efficiency.
- Tooth Surface Finish: Smoother tooth surfaces reduce friction and wear. Proper surface finish, achieved through grinding or honing, enhances efficiency by reducing energy losses due to friction.
- Material Selection: The choice of gear material influences wear, heat generation, and overall efficiency. Materials with good wear resistance and low friction coefficients contribute to higher efficiency.
- Profile Modification: Profile modifications, such as tip and root relief, optimize tooth contact and reduce interference. These modifications minimize friction and increase efficiency.
In summary, the design and profile of gear teeth play a crucial role in determining the efficiency of planetary gearboxes. Optimal tooth profiles, shapes, pressure angles, thicknesses, widths, surface finishes, and material selections all contribute to reducing friction, wear, and energy losses, resulting in improved overall efficiency.
Keuntungan Mekanisme Pengurangan Backlash pada Gearbox Planetary
Mekanisme pengurangan backlash pada planetary gearbox menawarkan beberapa keuntungan yang berkontribusi pada peningkatan kinerja dan presisi:
Akurasi Posisi yang Ditingkatkan: Backlash, atau celah antar gigi roda gigi, dapat menyebabkan kesalahan pemosisian dalam aplikasi yang membutuhkan gerakan presisi. Mekanisme reduksi membantu meminimalkan atau menghilangkan celah ini, sehingga menghasilkan pemosisian yang lebih akurat.
Karakteristik Pembalikan yang Lebih Baik: Backlash dapat menyebabkan penundaan dalam pembalikan arah gerakan. Dengan mekanisme reduksi, pembalikan arah gerakan lebih halus dan lebih cepat, sehingga cocok untuk aplikasi yang membutuhkan perubahan arah yang cepat.
Peningkatan Efisiensi: Backlash dapat menyebabkan kehilangan energi dan penurunan efisiensi akibat benturan antar gigi roda gigi. Mekanisme reduksi meminimalkan benturan ini, sehingga meningkatkan efisiensi transmisi daya secara keseluruhan.
Mengurangi Kebisingan dan Getaran: Backlash dapat menyebabkan kebisingan dan getaran pada gearbox, yang memengaruhi peralatan dan lingkungan sekitar. Dengan mengurangi backlash, tingkat kebisingan dan getaran berkurang secara signifikan.
Perlindungan Keausan yang Lebih Baik: Backlash dapat mempercepat keausan pada gigi gir, yang menyebabkan kegagalan dini pada gearbox. Mekanisme reduksi membantu mendistribusikan beban secara lebih merata di antara gigi, sehingga memperpanjang umur gearbox.
Stabilitas Sistem yang Ditingkatkan: Dalam aplikasi yang mana stabilitas sangat penting, seperti robotika dan otomatisasi, mekanisme pengurangan reaksi balik berkontribusi pada pengoperasian yang lebih lancar dan pengurangan osilasi.
Kompatibilitas dengan Aplikasi Presisi: Industri seperti kedirgantaraan, peralatan medis, dan optik membutuhkan presisi tinggi. Mekanisme pengurangan backlash membuat planetary gearbox cocok untuk aplikasi ini dengan memastikan gerakan yang akurat dan andal.
Peningkatan Kontrol dan Kinerja: Dalam aplikasi yang mana kontrol sangat penting, seperti mesin CNC dan robotika, mekanisme reduksi memberikan kontrol yang lebih baik atas gerakan dan memungkinkan penyesuaian yang lebih halus.
Akumulasi Kesalahan Diminimalkan: Pada sistem dengan beberapa tingkat roda gigi, reaksi balik dapat terakumulasi, yang mengakibatkan kesalahan pemosisian yang lebih besar. Mekanisme reduksi membantu meminimalkan akumulasi kesalahan ini, sehingga menjaga akurasi di seluruh sistem.
Secara keseluruhan, penggabungan mekanisme pengurangan serangan balik dalam kotak roda gigi planet menghasilkan peningkatan akurasi, efisiensi, keandalan, dan kinerja, menjadikannya komponen penting dalam industri yang mengutamakan presisi.
Kontribusi Planetary Gearbox terhadap Efisiennya Otomasi Industri dan Robotika
Gearbox planetary memainkan peran penting dalam meningkatkan efisiensi sistem otomasi industri dan robotika dengan menawarkan beberapa keuntungan:
1. Desain Kompak: Gearbox planetary memberikan kepadatan daya yang tinggi dan bentuk yang ringkas. Hal ini penting dalam robotika dan otomasi di mana ruang terbatas dan komponen perlu terintegrasi dengan erat.
2. Kepadatan Torsi Tinggi: Gearbox planetary dapat mencapai keluaran torsi tinggi dalam ukuran yang ringkas, yang memungkinkan robot dan sistem otomatis menangani beban berat dan melakukan tugas berat secara efisien.
3. Presisi dan Akurasi: Desain sistem roda gigi planet memastikan kontrol gerak yang akurat dan presisi. Hal ini penting dalam aplikasi robotika yang membutuhkan pemosisian presisi dan gerakan halus untuk tugas-tugas seperti operasi pengambilan dan penempatan serta perakitan.
4. Redundansi: Beberapa planetary gearbox memiliki beberapa tingkat dan konfigurasi redundan. Hal ini memberikan tingkat redundansi bawaan, meningkatkan keandalan sistem otomasi dengan memungkinkan operasi berkelanjutan bahkan jika satu tingkat mengalami kegagalan.
5. Efisiensi: Gearbox planetary dirancang untuk efisiensi tinggi, meminimalkan kehilangan energi, dan memastikan daya yang disalurkan ke tahap output dimanfaatkan secara efektif. Efisiensi ini krusial untuk mengurangi konsumsi energi dan mengoptimalkan masa pakai baterai dalam aplikasi robotik.
6. Kontrol Kecepatan: Gearbox planetary memungkinkan kontrol kecepatan yang presisi, memungkinkan robot untuk melakukan tugas pada kecepatan yang bervariasi sesuai kebutuhan. Fleksibilitas ini penting untuk tugas-tugas yang membutuhkan dinamika gerak atau profil kecepatan yang berbeda.
7. Pengurangan Beban Motor: Gearbox planetary dapat mengurangi beban pada motor dengan memberikan keuntungan mekanis melalui reduksi gigi. Hal ini memungkinkan penggunaan motor yang lebih kecil dan lebih efisien tanpa mengorbankan kinerja.
8. Penyerapan Guncangan: Elastisitas bawaan gigi roda gigi di kotak roda gigi planet dapat membantu menyerap guncangan dan benturan, melindungi komponen sistem dan memastikan operasi yang lancar di lingkungan yang dinamis.
9. Kustomisasi: Gearbox planetary dapat disesuaikan dengan kebutuhan aplikasi spesifik, termasuk rasio roda gigi, konfigurasi output, dan opsi pemasangan. Kemampuan adaptasi ini memungkinkan integrasi optimal ke dalam berbagai pengaturan otomasi dan robotika.
10. Perawatan dan Daya Tahan: Gearbox planetary berkualitas tinggi dirancang untuk daya tahan dan perawatan yang rendah. Hal ini terutama penting dalam otomasi industri dan robotika, yang membutuhkan operasi berkelanjutan dan waktu henti minimal.
Secara keseluruhan, kotak roda gigi planet memberikan kontribusi yang signifikan terhadap efisiensi operasi sistem otomasi industri dan robotika dengan menyediakan torsi, presisi, kekompakan, dan keandalan yang dibutuhkan untuk aplikasi yang dinamis dan menuntut ini.
editor by CX 2023-09-04
