Deskripsi Produk
Deskripsi Produk
high stability stainless steel agriculture bevel gearbox Planetary helical gearboxes reducers
HangZhou Fubao Electromechanical Technology Co., Ltd. bevel gearbox Planetary helical gearboxes Reducer is a new generation of practical products independently developed by our company:
Low noise: less than 65db.
Low back clearance: up to 3 arc minutes in a CZPT and 5 arc minutes in a double stage.
High torque: higher than the standard planetary reducer torque.
High stability: high strength alloy steel, the whole gear after hardening treatment, not only the surface hard substitution.
High deceleration ratio: Modular design, planetary gearbox can be interlinked.
bevel gearbox Planetary helical gearboxes Reducer characteristic:
1.Planetary reducer manufacturer-Fubao Electromechanical Technology adopts an integrated planetary carrier and output shaft, which can provide better torsional rigidity. After precision machining, the gear set is not easy to eccentric, which can reduce interference, reduce wear and noise, and at the same time use a large The bearings are arranged with a wide span to distribute the load of the bearings, and once again strengthen the torque rigidity and radial load capacity of the bevel gearbox Planetary helical gearboxes Reducer. The output cover is made of aluminum alloy, which provides better heat dissipation capability for the product, so that the reducer produced by Fubao Electromechanical Technology can play an excellent role in the field of mechanical tools.
2.The planetary gear set is specially made of alloy steel. First, it undergoes quenching and tempering heat treatment to make the material hardness reach HRC30 degrees, and then undergoes nitriding surface treatment to HV860, so that the product has the characteristics of high surface hardness and high toughness in the center, and achieves the best product strength and service life. optimization.
3.The input shaft and the motor output shaft are connected by a bolted structure, with a round shaft seal design, and through dynamic balance analysis, it can ensure that there is no eccentric load at high speeds. After reducing unnecessary radial force, it can effectively Reduce the load on the motor side.
4.The material of the input cover/motor connection seat is made of aluminum alloy, which can provide better heat dissipation effect, and then provide good concentricity and verticality through professional lathe processing, so that the product can be stably combined with various motors, reducing the damage caused by insufficient precision. Unnecessary axial radial force makes the product have a longer life cycle.
Compared with other reduction machines, bevel gearbox Planetary helical gearboxes Reducer machines have high rigidity, high precision (single stage can be achieved within 1 point), high transmission efficiency (single stage in 97-98%), high torque/volume ratio, lifetime maintenance free and other characteristics.
Because of these characteristics,bevel gearbox Planetary helical gearboxes Reducer is mostly installed on the stepper motor and servo motor, used to reduce speed, increase torque, matching inertia.
Parameter Produk
| WVB/WVBL series parameters | Model number | WVB042/WVBL50 | WVB60/WVBL70 | WVB/WVBL90 | WVB/WVBL120 | WVB142/WVBL155 | WVB180/WVBL205 | WVB220/WVBL235 |
| Rated output torque | 13-17Nm | 32-48Nm | 80-125Nm | 165-265Nm | 280-530Nm | 480-960Nm | 900-1360Nm | |
| Reduction ratio | L1: 3, 4, 5, 7, 10 | L2: 12, 15, 20, 25, 30, 35, 40, 50, 70, 100 | ||||||
| Planetary gear backlash | L1: P1≤3 P2≤5 L2: P1≤5 P2≤7 | |||||||
Detailed Photos
Product Details
Other products
Profil Perusahaan
HangZhou Fubao Electromechanical Technology Co., Ltd. was established in 2008, the company has a complete precision reducer design, production capacity. Set R & D, manufacturing, assembly and sales, more in the field of gear manufacturing has more than 10 years of background, in the manufacturing equipment is equipped with Switzerland Riesenhahl gear grinding machine, domestic Qinchuan gear grinding machine, hamai gear hobbing machine and domestic Xihu (West Lake) Dis. gear hobbing machine, Japan Yasaki TLGmazak CNC lathe, CNC milling machine and other fully CNC equipment, In addition, it is equipped with other advanced measuring equipment such as Japanese TTI gear detector, 3 coordinate measurement, reducer backlash measurement instrument and so on. In a strong manufacturing capacity at the same time, can be stable, continuous manufacturing of high-quality precision reducer products.
The precision reducer produced by our company has the characteristics of high structural rigidity, small back backlash, precise transmission and so on. It is widely used in various industries. Companies adhering to the concept of let customers participate in manufacturing, and strive to provide customers with more personalized services. In the field of precision transmission has a unique achievements. It is our CZPT pursuit to make far-reaching contributions.
Factory Display
Tanya Jawab Umum
Q: Speed reducer grease replacement time
A: When sealing appropriate amount of grease and running reducer, the standard replacement time is 20000 hours according to the aging condition of the grease. In addition, when the grease is stained or used in the surrounding temperature condition (above 40ºC), please check the aging and fouling of the grease, and specify the replacement time.
Q: Delivery time
A: Fubao has 2000+ production base, daily output of 1000+ units, standard models within 7 days of delivery.
Q: Reducer selection
A: Fubao provides professional product selection guidance, with higher product matching degree, higher cost performance and higher utilization rate.
Q: Application range of reducer
A: Fubao has a professional research and development team, complete category design, can match any stepping motor, servo motor, more accurate matching.
/* 22 Januari 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Aplikasi: | Motor, Machinery, Agricultural Machinery, Semiconductor Manufacturing Equipment |
|---|---|
| Kekerasan: | Permukaan Gigi yang Mengeras |
| Instalasi: | Tipe Horizontal |
| Kustomisasi: |
Tersedia
| Permintaan Khusus |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Pergerakan Halus dan Terkendali pada Robot Industri dengan Planetary Gearbox
Gearbox planetary memainkan peran penting dalam memastikan pergerakan yang halus dan terkendali pada robot industri, meningkatkan presisi dan kinerjanya:
Mengurangi Reaksi Balik: Gearbox planetary dirancang untuk meminimalkan backlash, yaitu jumlah ruang bebas atau pergerakan bebas antar gigi roda gigi. Pengurangan backlash ini menghasilkan kontrol gerak yang presisi dan akurat, yang memungkinkan robot industri mencapai pemosisian dan pengulangan yang presisi.
Rasio Reduksi Gigi Tinggi: Gearbox planetary menawarkan rasio reduksi gigi yang tinggi, memungkinkan motor robot menghasilkan torsi yang lebih tinggi dengan kecepatan yang lebih rendah. Kemampuan ini memungkinkan robot untuk menangani beban berat dan melakukan tugas-tugas yang memerlukan penyesuaian halus dan gerakan yang rumit.
Desain Kompak: Desain planetary gearbox yang ringkas dan ringan memungkinkan integrasinya ke dalam ruang terbatas pada sambungan dan aktuator robot industri. Kekompakan ini krusial untuk menjaga efisiensi dan kelincahan pergerakan robot secara keseluruhan.
Kemampuan Multi-Kecepatan: Gearbox planetary dapat dirancang dengan beberapa tingkat gigi, memungkinkan robot industri beroperasi pada kecepatan yang berbeda sesuai kebutuhan untuk berbagai tugas. Fleksibilitas dalam pemilihan kecepatan ini meningkatkan fleksibilitas robot dalam melakukan tugas dengan berbagai kompleksitas.
Efisiensi Tinggi: Gearbox planetary dikenal karena efisiensinya yang tinggi, yang berarti kehilangan energi minimal selama transmisi gigi. Efisiensi ini memastikan pergerakan robot yang halus dan konsisten sekaligus mengoptimalkan konsumsi energi.
Distribusi Torsi: Susunan roda gigi planet memungkinkan distribusi torsi yang efisien di berbagai tingkat roda gigi. Fitur ini memastikan bahwa sambungan dan aktuator robot menerima jumlah torsi yang tepat untuk gerakan yang terkontrol, bahkan saat menangani beban yang bervariasi.
Integrasi yang Sempurna: Gearbox planetary dirancang agar mudah diintegrasikan dengan motor servo dan komponen robotik lainnya. Integrasi yang mulus ini memastikan kinerja gearbox selaras dengan sistem robotik secara keseluruhan.
Presisi dan Akurasi: Dengan menyediakan pengurangan gigi dan kontrol gerak yang presisi, kotak roda gigi planet memungkinkan robot industri untuk melakukan tugas yang menuntut tingkat presisi dan akurasi tinggi, seperti perakitan, pengelasan, pengecatan, dan penanganan material yang rumit.
Getaran Berkurang: Backlash yang berkurang dan pemasangan roda gigi yang halus pada planetary gearbox berkontribusi pada minimnya getaran selama pengoperasian robot. Hal ini menghasilkan pergerakan robot yang lebih senyap dan stabil, yang selanjutnya meningkatkan kinerja dan pengalaman pengguna.
Penanganan Beban Dinamis: Gearbox planetary dapat menangani beban dinamis yang dapat berubah selama operasi robot. Kemampuannya untuk mengelola beban yang bervariasi sambil mempertahankan gerakan yang terkendali sangat penting untuk kinerja robot yang aman dan andal.
Singkatnya, girboks planet memastikan pergerakan yang mulus dan terkendali pada robot industri dengan meminimalkan backlash, menawarkan rasio reduksi gigi yang tinggi, desain yang ringkas, memungkinkan kemampuan multi-kecepatan, mempertahankan efisiensi tinggi, mendistribusikan torsi secara efektif, terintegrasi secara mulus dengan sistem robotik, meningkatkan presisi dan akurasi, mengurangi getaran, dan memungkinkan penanganan beban yang dinamis. Fitur-fitur ini secara kolektif berkontribusi pada pergerakan robot industri yang presisi dan optimal dalam berbagai aplikasi dan industri.
Recent Advancements in Planetary Gearbox Technology
Advancements in planetary gearbox technology have led to improved performance, efficiency, and durability. Here are some notable developments:
High-Efficiency Gearing: Manufacturers are using advanced materials and precision manufacturing techniques to create gears with optimized tooth profiles. This reduces friction and enhances overall efficiency, resulting in higher power transmission with lower energy losses.
Enhanced Lubrication: Innovative lubrication systems and high-performance lubricants are being employed to ensure consistent and reliable lubrication even in extreme conditions. This helps to reduce wear and extend the lifespan of the gearbox.
Compact Designs: Engineers are focusing on designing more compact and lightweight planetary gearboxes without compromising their performance. This is particularly important for applications with limited space and weight constraints.
Integrated Sensors: Planetary gearboxes are now being equipped with sensors and monitoring systems that provide real-time data on temperature, vibration, and other operating parameters. This allows for predictive maintenance and early detection of potential issues.
Smart Gearboxes: Some modern planetary gearboxes are equipped with smart features such as remote monitoring, adaptive control, and data analysis. These features contribute to more efficient operation and better integration with automation systems.
Advanced Materials: The use of high-strength and wear-resistant materials, such as advanced alloys and composites, improves the durability and load-carrying capacity of planetary gearboxes. This is particularly beneficial for heavy-duty and high-torque applications.
Customization and Simulation: Advanced simulation and modeling tools enable engineers to design and optimize planetary gearboxes for specific applications. This customization helps achieve the desired performance and reliability levels.
Noise and Vibration Reduction: Innovations in gear design and manufacturing techniques have led to quieter and smoother-running planetary gearboxes, making them suitable for applications where noise and vibration are concerns.
Environmental Considerations: With growing environmental awareness, manufacturers are developing more eco-friendly lubricants and materials for planetary gearboxes, reducing their ecological footprint.
Overall, recent advancements in planetary gearbox technology are aimed at enhancing efficiency, durability, and versatility to meet the evolving demands of various industries and applications.
Factors to Consider When Selecting a Planetary Gearbox
Choosing the right planetary gearbox for a specific application involves considering various factors to ensure optimal performance and compatibility. Here are the key factors to keep in mind:
- Load Requirements: Determine the torque and speed requirements of your application. Planetary gearboxes offer different torque and speed ratios, so selecting the appropriate gearbox with the right load capacity is crucial.
- Ratio: Evaluate the gear reduction ratio needed to achieve the desired output speed and torque. Planetary gearboxes come in various gear ratios, allowing you to customize the output characteristics.
- Efisiensi: Consider the gearbox’s efficiency, as it affects energy consumption and heat generation. Higher efficiency gearboxes minimize power losses during transmission.
- Size and Compactness: Planetary gearboxes are known for their compact size, but it’s essential to choose a size that fits within the available space while meeting performance requirements.
- Mounting Configuration: Determine how the gearbox will be mounted in your application. Planetary gearboxes can have different mounting options, including flange, shaft, or foot mountings.
- Input and Output Types: Select the appropriate input and output shaft configurations, such as male, female, keyed, splined, or hollow shafts, to ensure compatibility with your equipment.
- Environment: Consider the operating environment, including temperature, humidity, dust, and potential exposure to chemicals. Choose a gearbox with appropriate seals and materials to withstand the conditions.
- Accuracy: Some applications require precise motion control. If accuracy is essential, choose a gearbox with minimal backlash and high gear mesh quality.
- Service Life and Reliability: Evaluate the gearbox’s expected service life and reliability based on the manufacturer’s specifications. Choose a reputable manufacturer known for producing reliable products.
- Backlash: Backlash is the play between gears that can affect positioning accuracy. Depending on your application, you might need a gearbox with low backlash or a method to compensate for it.
- Budget: Consider your budget constraints while balancing performance requirements. Sometimes, investing in a higher-quality gearbox upfront can lead to long-term cost savings through reduced maintenance and downtime.
By carefully considering these factors and consulting with gearbox manufacturers or experts, you can select a planetary gearbox that best meets the unique demands of your application.
editor by CX 2024-02-29
