제품 설명
Bevel helical gearbox with permanent magnet synchronous motor integrate variable frequency driver for conveyor
SNKG Series prorduct adopt harden teeth surface bevel gear and helical gear to drive, following the design principle of modularization , FEA analyse technology, unique low-noise gear tooth profile, with the characteristics of compact volume, high load performance and stable running, reliability and long service life.
Key Benefits
-Simple wiring, low cost
-Large amount of data, fast speed, 100m, data transmission is 500K
-All control units have the same condition, it means each node has the same rights to occupy the bus (send and receive)
-Communication rate meets control requirements, communication data amount supports required data reading.
-Electric eye and proximity switch sensor supply signal to the driver directly, it is convenient and reliable.
About Us
ZheJiang CHINAMFG Drive Co.,Ltd(Starshine) have a strong technical force with over 350 employees at present, including over 30 engineering technicians, 30 quality inspectors, covering an area of 80000 square CHINAMFG and kinds of advanced processing machines and testing equipments. We have a good foundation for the industry application development and service of high-end speed reducers & variators owning to the provincial engineering technology research center,the lab of gear speed reducers, and the base of modern R&D.
Our Team
Quality Control
Quality:Insist on Improvement,Strive for CHINAMFG With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of our products,on the contrary,wcreate the value of quality.
Quality policy:to enhance the overall level in the field of power transmission
Quality View:Continuous Improvement , pursuit of CHINAMFG
Quality Philosophy:Quality creates value
3. Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection; responsible for tracking bad, to monitor the supplier to take corrective measures to prevent recurrence.
4. Process Quality Control
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend; found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state.
5. FQC(Final QC)
After the manufacturing department will complete the product, stand in the customer’s position on the finished product quality verification, in order to ensure the quality of customer expectations and needs.
6. OQC(Outgoing QC)
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the product is a product inspection to determine the qualified products.
Packing
Delivery
/* 2571년 1월 22일 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| 애플리케이션: | Motorcycle, Machinery, Marine, Agricultural Machinery, Ceramic |
|---|---|
| 경도: | 경화된 치아 표면 |
| 설치: | 수평형 |
| 공들여 나열한 것: | Corner |
| Gear Shape: | Helical Gear |
| 단계: | 단일 단계 |
| 샘플: |
US$ 569/Piece
1개(최소 주문) | |
|---|
| 사용자 정의: |
사용 가능
| 맞춤형 요청 |
|---|
Can you provide real-world examples of products that use gear reducer technology?
Certainly! Gear reducer technology is widely used in various industries and products to enhance performance and efficiency. Here are some real-world examples:
1. Industrial Machinery: Gear reducers are commonly used in manufacturing machinery, such as conveyor systems, material handling equipment, and assembly lines, where they help control speed and torque for precise operations.
2. Wind Turbines: Wind turbines utilize gear reducers to transform the low rotational speed of the wind turbine rotor into the higher speed needed for electricity generation, optimizing energy conversion.
3. Automotive Transmissions: Automobiles use gear reducers as part of their transmissions to optimize power delivery from the engine to the wheels, allowing the vehicle to operate efficiently at different speeds.
4. Robotics: Robotic systems rely on gear reducers to control the movement and articulation of robot arms, enabling precise and controlled motion for various applications.
5. Printing Presses: Gear reducers are integral to printing presses, ensuring accurate and synchronized movement of printing plates, rollers, and paper feed mechanisms.
6. Conveyor Belts: Conveyor systems in industries like mining, agriculture, and logistics use gear reducers to regulate the movement of materials along the conveyor belts.
7. Packaging Machinery: Gear reducers play a crucial role in packaging machines, controlling the speed and movement of packaging materials, filling mechanisms, and sealing components.
8. Cranes and Hoists: Cranes and hoists rely on gear reducers to lift heavy loads with precision and control, ensuring safe and efficient material handling.
9. Pumps and Compressors: Gear reducers are utilized in pumps and compressors to regulate fluid flow and pressure, optimizing energy usage in fluid transportation systems.
10. Agriculture Equipment: Tractors and other agricultural machinery use gear reducers to adjust the speed and power delivery for different tasks, such as plowing, planting, and harvesting.
These examples demonstrate the diverse applications of gear reducer technology across various industries, showcasing their role in enhancing efficiency, control, and performance in a wide range of products and systems.
기어 감속기의 수명을 연장하기 위해서는 어떤 유지관리 관행이 필수인가요?
적절한 유지관리는 감속기의 수명을 연장하고 최적의 성능을 보장하는 데 매우 중요합니다. 필수적인 유지관리 방법은 다음과 같습니다.
- 1. 윤활: 기어 감속기의 정기적인 윤활은 마찰, 마모 및 발열을 줄이는 데 필수적입니다. 권장 윤활제를 사용하고 제조업체의 윤활 주기 지침을 준수하십시오.
- 2. 검사: 기어 감속기의 마모, 손상 또는 누출 징후를 정기적으로 점검하십시오. 작동 중 비정상적인 소음, 진동 또는 온도 상승이 있는지 확인하십시오.
- 3. 정렬: 입력축과 출력축의 정렬을 올바르게 하십시오. 정렬이 잘못되면 마모, 소음 증가 및 효율 저하로 이어질 수 있습니다. 제조업체의 사양에 따라 부품을 정렬하십시오.
- 4. 냉방 및 환기: 과열을 방지하기 위해 적절한 냉각 및 환기를 유지하세요. 냉각 팬과 통풍구가 깨끗하고 막히지 않았는지 확인하세요.
- 5. 씰 유지 관리: 오염 물질이 감속기에 유입되는 것을 방지하기 위해 필요에 따라 씰을 검사하고 교체하십시오. 오염 물질은 마모를 가속화하고 성능을 저하시킬 수 있습니다.
- 6. 볼트 및 패스너: 작동 중 느슨해짐으로 인해 정렬 불량이나 부품 손상이 발생하는 것을 방지하기 위해 볼트와 패스너를 정기적으로 점검하고 조이십시오.
- 7. 마모된 부품 교체: 기어, 베어링, 씰 등 마모되거나 손상된 구성품은 제조업체의 정품 부품으로 교체하세요.
- 8. 진동 분석: 잠재적인 문제를 조기에 파악하기 위해 주기적인 진동 분석을 실시하십시오. 과도한 진동은 정렬 불량이나 부품 마모를 나타낼 수 있습니다.
- 9. 유지 관리 기록: 윤활 일정, 검사 날짜, 부품 교체 등을 포함한 자세한 유지 관리 기록을 보관하십시오. 이를 통해 감속기 이력을 추적하고 향후 유지 관리 계획을 세우는 데 도움이 됩니다.
- 10. 훈련: 유지 보수 인력에게 기어 감속기 유지 보수 및 문제 해결 기술에 대한 적절한 교육을 제공합니다.
이러한 유지 관리 관행을 준수하면 기어 감속기의 수명을 극대화하고, 가동 중지 시간을 최소화하며, 산업 공정에서 안정적인 작동을 보장할 수 있습니다.
Are there variations in gear reducer designs for specific tasks and applications?
Yes, gear reducer designs vary widely to suit specific tasks and applications across various industries. Manufacturers offer a range of gear reducer types and configurations to accommodate different requirements, including:
- Helical Gear Reducers: These are versatile and provide smooth and efficient torque transmission. They are commonly used in applications requiring high precision and moderate speed reduction, such as conveyors, mixers, and agitators.
- Bevel Gear Reducers: These are ideal for transmitting power between intersecting shafts. They are often used in heavy machinery, printing presses, and automotive applications.
- Worm Gear Reducers: These provide compact solutions and are suitable for applications with higher speed reduction requirements, such as conveyor systems, winches, and elevators.
- Planetary Gear Reducers: These offer high torque density and are used in applications demanding precise control, such as robotics, aerospace, and heavy-duty machinery.
- Parallel Shaft Gear Reducers: Commonly used in industrial machinery, these reducers are designed for high torque and reliability.
- Right-Angle Gear Reducers: These are used when space limitations require a change in shaft direction, commonly found in packaging equipment and conveyors.
Each type of gear reducer has unique features and benefits that make it suitable for specific tasks. Manufacturers often provide customization options to tailor gear reducers to the precise requirements of an application, including gear ratios, mounting options, and input/output configurations.
Therefore, the variation in gear reducer designs allows industries to select the most appropriate type based on factors such as torque, speed, space constraints, precision, and environmental conditions.
editor by CX 2024-03-04
