제품 설명
제품 설명
HangZhou Fubao Electromechanical Technology Co., Ltd.price negotiable High Precision Cycloidal Pin Gear Reducer Reduction Gearbox for DC Motor Installed with radial thrust ball bearings, so it can support external load, torque rigidity, large allowable torque, can reduce the number of components required, easy installation. The revolution speed of WRV gears is slower and vibration is reduced, which can reduce the motor structure (input gear) and inertia.
High Precision Cycloidal Pin Gear Reducer reduction gearbox High precision, high rigidity, high torque, high load and other characteristics realize hollow design at the same time. After being hollowed out, the ease of use of the product is improved due to the variety of piping and cable layout options.
The High Precision Cycloidal Pin Gear Reducer reduction gearbox is developed on the basis of the traditional needle wheel reducer. It not only overcomes the shortcomings of the general needle pendulum transmission, but also has more advantages, such as long life, stable precision, high efficiency, smooth transmission, small size, Light weight, large reduction ratio range, etc. This RV reducer from FUBAO adopts a double support support mechanism and a pinwheel mechanism, even if a torque up to 6 times the rated torque is applied, the product will not be damaged, and the torsional rigidity is very large. Small backlash, small volume, large torque. In order to directly support large loads, main bearings (large angular contact ball bearings) are installed inside.
High Precision Cycloidal Pin Gear Reducer reduction gearbox mainly has the following characteristics:
A. Main bearing built-in mechanism
1. Improved reliability;
2. Total cost reduction;
3. Radial thrust ball bearings are installed, so they can support external loads, and the moment rigidity and allowable moment are large, which can reduce the number of required components;
4. The use of couplings and motor flanges makes the installation of the motor very simple.
B. 2-stage deceleration mechanism
1. Small vibration;
2. The revolution speed of the gear is slowed down, the vibration is reduced, and the direct connection part of the motor (input gear) can be reduced, and the inertia can be reduced.
C. Double column support mechanism
1. High torsional rigidity;
2. Strong impact resistance;
3. The crank shaft is supported by double columns in the reducer.
D. Rolling contact mechanism
1. Excellent starting power;
2. Small abrasion and long service life;
3. Small backlash (1arc.min).
| 모델 번호 | WRV-6E | WRV-20E | WRV-40E | WRV-80E | WRV-110E | WRV-160E | WRV-320E | WRV-450E |
| Deceleration ratio | 31-103 | 57-161 | 57-153 | 57-153 | 81-175 | 81-171 | 81-185 | 81-192 |
| Rated torque | 196 | 882 | 1666 | 2156 | 2940 | 3920 | 7056 | 8820 |
| Instantaneous maximum allowable torque Nm | 392 | 1764 | 3332 | 4312 | 5880 | 7840 | 14112 | 17640 |
| Maximum backgap Arc-min | ≤1.5 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 |
상세 사진
제품 상세 정보
Basic Information
Application Case
회사 프로필
공장 디스플레이
자주 묻는 질문
Q: 감속기 그리스 교체 시기
A: 적정량의 그리스와 런닝 리듀서를 밀봉할 경우, 그리스의 노화 상태에 따라 표준 교체 시기는 20,000시간입니다. 또한, 그리스가 오염되었거나 주변 온도 조건(40°C 이상)에서 사용되는 경우, 그리스의 노화 및 오염 여부를 확인하고 교체 시기를 명시해 주십시오.
Q: 배송 시간
A: 푸바오는 2000개 이상의 생산 기지를 보유하고 있으며, 일일 생산량은 1000개 이상이며, 표준 모델은 7일 이내에 배송됩니다.
Q: 리듀서 선택
A: 푸바오는 전문적인 제품 선택 가이드를 제공하며, 제품 매칭도가 높고, 비용 대비 성능이 우수하며, 활용률이 높습니다.
Q: 감속기의 적용 범위
A: 푸바오는 전문적인 연구개발팀을 보유하고 있으며, 완벽한 카테고리 디자인을 갖추고 있어 모든 스테핑 모터, 서보 모터와 일치할 수 있으며, 더욱 정확한 일치가 가능합니다.
|
배송비:
단위당 예상 운임. |
협상할 예정 |
|---|
기어 감속기의 수명을 연장하기 위해서는 어떤 유지관리 관행이 필수인가요?
적절한 유지관리는 감속기의 수명을 연장하고 최적의 성능을 보장하는 데 매우 중요합니다. 필수적인 유지관리 방법은 다음과 같습니다.
- 1. 윤활: 기어 감속기의 정기적인 윤활은 마찰, 마모 및 발열을 줄이는 데 필수적입니다. 권장 윤활제를 사용하고 제조업체의 윤활 주기 지침을 준수하십시오.
- 2. 검사: 기어 감속기의 마모, 손상 또는 누출 징후를 정기적으로 점검하십시오. 작동 중 비정상적인 소음, 진동 또는 온도 상승이 있는지 확인하십시오.
- 3. 정렬: 입력축과 출력축의 정렬을 올바르게 하십시오. 정렬이 잘못되면 마모, 소음 증가 및 효율 저하로 이어질 수 있습니다. 제조업체의 사양에 따라 부품을 정렬하십시오.
- 4. 냉방 및 환기: 과열을 방지하기 위해 적절한 냉각 및 환기를 유지하세요. 냉각 팬과 통풍구가 깨끗하고 막히지 않았는지 확인하세요.
- 5. 씰 유지 관리: 오염 물질이 감속기에 유입되는 것을 방지하기 위해 필요에 따라 씰을 검사하고 교체하십시오. 오염 물질은 마모를 가속화하고 성능을 저하시킬 수 있습니다.
- 6. 볼트 및 패스너: 작동 중 느슨해짐으로 인해 정렬 불량이나 부품 손상이 발생하는 것을 방지하기 위해 볼트와 패스너를 정기적으로 점검하고 조이십시오.
- 7. 마모된 부품 교체: 기어, 베어링, 씰 등 마모되거나 손상된 구성품은 제조업체의 정품 부품으로 교체하세요.
- 8. Vibratio
Are there any disadvantages or limitations to using gear reducer systems?
While gear reducer systems offer numerous advantages, they also come with certain disadvantages and limitations that should be considered during the selection and implementation process:
1. Size and Weight: Gear reducers can be bulky and heavy, especially for applications requiring high gear ratios. This can impact the overall size and weight of the machinery or equipment, which may be a concern in space-constrained environments.
2. Efficiency Loss: Despite their high efficiency, gear reducers can experience energy losses due to friction between gear teeth and other components. This can lead to a reduction in overall system efficiency, particularly in cases where multiple gear stages are used.
3. Cost: The design, manufacturing, and assembly of gear reducers can involve complex processes and precision machining, which can contribute to higher initial costs compared to other power transmission solutions.
4. Maintenance: Gear reducer systems require regular maintenance, including lubrication, inspection, and potential gear replacement over time. Maintenance activities can lead to downtime and associated costs in industrial settings.
5. Noise and Vibration: Gear reducers can generate noise and vibrations, especially at high speeds or when operating under heavy loads. Additional measures may be needed to mitigate noise and vibration issues.
6. Limited Gear Ratios: While gear reducers offer a wide range of gear ratios, there may be limitations in achieving extremely high or low ratios in certain designs.
7. Temperature Sensitivity: Extreme temperatures can affect the performance of gear reducer systems, particularly if inadequate lubrication or cooling is provided.
8. Shock Loads: While gear reducers are designed to handle shock loads to some extent, severe shock loads or abrupt changes in torque can still lead to potential damage or premature wear.
Despite these limitations, gear reducer systems remain widely used and versatile components in various industries, and their disadvantages can often be mitigated through proper design, selection, and maintenance practices.
n Analysis:
잠재적인 문제를 조기에 파악하기 위해 주기적인 진동 분석을 실시하십시오. 과도한 진동은 정렬 불량이나 부품 마모를 나타낼 수 있습니다. - 9. 유지 관리 기록: 윤활 일정, 검사 날짜, 부품 교체 등을 포함한 자세한 유지 관리 기록을 보관하십시오. 이를 통해 감속기 이력을 추적하고 향후 유지 관리 계획을 세우는 데 도움이 됩니다.
- 10. 훈련: 유지 보수 인력에게 기어 감속기 유지 보수 및 문제 해결 기술에 대한 적절한 교육을 제공합니다.
이러한 유지 관리 관행을 준수하면 기어 감속기의 수명을 극대화하고, 가동 중지 시간을 최소화하며, 산업 공정에서 안정적인 작동을 보장할 수 있습니다.
| 애플리케이션: | Motor, Machinery, Agricultural Machinery, Robot Arm |
|---|---|
| 기능: | Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction |
| 공들여 나열한 것: | Cycloidal |
| 사용자 정의: |
사용 가능
| 맞춤형 요청 |
|---|
How do gear reducers handle variations in input and output speeds?
Gear reducers are designed to handle variations in input and output speeds through the use of different gear ratios and configurations. They achieve this by utilizing intermeshing gears of varying sizes to transmit torque and control rotational speed.
The basic principle involves connecting two or more gears with different numbers of teeth. When a larger gear (driving gear) engages with a smaller gear (driven gear), the rotational speed of the driven gear decreases while the torque increases. This reduction in speed and increase in torque enable gear reducers to efficiently adapt to variations in input and output speeds.
The gear ratio is a critical factor in determining how much the speed and torque change. It is calculated by dividing the number of teeth on the driven gear by the number of teeth on the driving gear. A higher gear ratio results in a greater reduction in speed and a proportionate increase in torque.
Planetary gear reducers, a common type, use a combination of gears including sun gears, planet gears, and ring gears to achieve different speed reductions and torque enhancements. This design provides versatility in handling variations in speed and torque requirements.
In summary, gear reducers handle variations in input and output speeds by using specific gear ratios and gear arrangements that enable them to efficiently transmit power and control motion characteristics according to the application’s needs.
editor by CX 2023-08-15
