제품 설명
Construction Machinery GJJ YHX rack and pinion hoist GearBox Reducer
제품 설명
A.The features of Casing Safe Driving Motor Hoist Lifts Gearboxes 11KW 15KW Passenger Hoist Reducer
- The reducers have the following features because of using plane enveloping worm gear as compared with other kinds of worm transmissions: larger loading capactiy and compact dimension and higher efficiency and smoother and quieter functioning longer service life.
- In addition, the housings of these series reducers are made of high-strenghth aluminium alloy. So the reducers make the features of higher strength and lighter weight.
- It is recommended to utilize the viscosity VG320 synthetic worm gear oil (or synthetic gear oil) for lubrication. Once the environment temperature is higher than 30°C, it is recommended to utilize the viscosity VG460 synthetic worm gear oil (or synthetic gear oil) for lubrication. And allowed maximum working oil temperature is 100°C.
| Number | 무게 | Transmission Ratio |
Center Distance (mm) |
Output power (KW) |
Ordering instruction |
| 1 | 50KG | 1:16 | 125 | 11.6 |
Please specify transmissionratio and type when ordering |
| 2 | 1:18 | 125 | 10.3 | ||
| 3 | 1:14 | 125 | 11.72 | ||
B.Installation
- The base-plate must be plane and stoutness and the base-plate must be screwed down and shock proof.
- The connecting shaft of prime mover, reducer and operation device must be coaxial installation.
- The diameter tolerance zone of input and output shaft is H6, the holes of fittings( such as couplings, belt-pully, sprocket wheel and so on) must properly mate the shaft, which prevents bearing from breakage because of over-loose mate.
- Drivers such as sprocker wheel and gear must be fitted close to bearings in order to reduce bending stress of hanging shaft.
- While assembling motor of WPD reducer, it is necessary that proper amount of butter applies to the warm shaft input hole and keyway, avoiding assembling too tightly and rusting after using for a long time.
- When ordering or using all kinds of WPD type, if the motor weight is bigger than the common,supporting set is required.
|
Speed ratio (I) |
Center Distance (mm) |
입력 속도 (r/min) |
Input Power (Kw) |
Rated output Torque (N.M) |
TransmissionEfficiency (%) |
| 14 | 125 | 1500 | 11.2 | 1128 | 89 |
| 1000 | 9.919 | 1276 | 87.4 | ||
| 16 | 125 | 1500 | 11.06 | 1136 | 88 |
| 1000 | 9.651 | 1417 | 87.5 | ||
| 20 | 144 | 1500 | 13 | 1942 | 86.5 |
| 1000 | 11.52 | 2512 | 85.4 | ||
| 25 | 125 | 1000 | 11.4 | 2650 | 83 |
| 1500 | 13 | 2166 | 84 |
C.Usage
- Before using,please check carefully whether the reducer modle, distance, ratio, input connecting method , output shaft structure, input and output shaft direction and revolving direction accord with required.
- According to the requirement of selecting lubricant oil in the product manual. Please fill proper category and brand lubricant.And then screw on the vent-plug, unlock the small cone-plug of vent-plug.Only after doing these, reducer is already for startinh up running.The proper brand and adequate lubricant oil is required, replacing oil in time conforming to the request of product manual is also necessary, especially after using first 100hours, it is required refilling new oil.
- When abnormal circumstances occur, please stop and check reducer per solutions and reasons for faults of reducer(allowable highest oil temperature is 95, under this temperature limit, if oil temperature no more goes up, please let reducer continue running).
자주 묻는 질문
Q1: Are you a trading company or a factory?
A1: We are factory.
Q2: How about the installation?
A2: Engineer could be sent to your site for installing and inspection.
Q3: How long is your delivery time?
A3: Generally 20 days after advance payment.
Q4: How to place the order ?
A4: pls provide the rack technical data , we can quote the price to you
| After-sales Service: | Online Service |
|---|---|
| 보증: | 1year |
| 유형: | Construction Hoist Spare Parts |
| 애플리케이션: | Construction Hoist |
| Certification: | ISO9001: 2000 |
| Condition: | New |
| 샘플: |
US$ 1/Piece
1개(최소 주문) | |
|---|
| 사용자 정의: |
사용 가능
| 맞춤형 요청 |
|---|
How do gear reducers contribute to energy efficiency in machinery and equipment?
Gear reducers play a significant role in enhancing energy efficiency in various machinery and equipment. Here’s how they contribute:
1. Speed Reduction: Gear reducers are commonly used to reduce the speed of the input shaft, allowing the motor to operate at a higher speed where it’s most efficient. This speed reduction helps match the motor’s optimal operating range, reducing energy consumption.
2. Torque Increase: Gear reducers can increase torque output while decreasing speed, enabling machinery to handle higher loads without the need for a larger, more energy-intensive motor.
3. Matching Load Requirements: By adjusting gear ratios, gear reducers ensure that the machinery’s output speed and torque match the load requirements. This prevents the motor from operating at unnecessary high speeds, saving energy.
4. Variable Speed Applications: In applications requiring variable speeds, gear reducers allow for efficient speed control without the need for continuous motor adjustments, improving energy usage.
5. Efficient Power Transmission: Gear reducers efficiently transmit power from the motor to the load, minimizing energy losses due to friction and inefficiencies.
6. Motor Downsizing: Gear reducers enable the use of smaller, more energy-efficient motors by converting their higher speed, lower torque output into the lower speed, higher torque needed for the application.
7. Decoupling Motor and Load Speeds: In cases where the motor and load speeds are inherently different, gear reducers ensure the motor operates at its most efficient speed while still delivering the required output to the load.
8. Overcoming Inertia: Gear reducers help overcome the inertia of heavy loads, making it easier for motors to start and stop, reducing energy consumption during frequent operation.
9. Precise Control: Gear reducers provide precise control over speed and torque, optimizing the energy consumption of machinery in processes that require accurate adjustments.
10. Regenerative Braking: In some applications, gear reducers can be used to capture and convert kinetic energy back into electrical energy during braking or deceleration, improving overall energy efficiency.
By efficiently managing speed, torque, and power transmission, gear reducers contribute to energy-efficient operation, reducing energy consumption, and minimizing the environmental impact of machinery and equipment.
기어 감속기의 수명을 연장하기 위해서는 어떤 유지관리 관행이 필수인가요?
적절한 유지관리는 감속기의 수명을 연장하고 최적의 성능을 보장하는 데 매우 중요합니다. 필수적인 유지관리 방법은 다음과 같습니다.
- 1. 윤활: 기어 감속기의 정기적인 윤활은 마찰, 마모 및 발열을 줄이는 데 필수적입니다. 권장 윤활제를 사용하고 제조업체의 윤활 주기 지침을 준수하십시오.
- 2. 검사: 기어 감속기의 마모, 손상 또는 누출 징후를 정기적으로 점검하십시오. 작동 중 비정상적인 소음, 진동 또는 온도 상승이 있는지 확인하십시오.
- 3. 정렬: 입력축과 출력축의 정렬을 올바르게 하십시오. 정렬이 잘못되면 마모, 소음 증가 및 효율 저하로 이어질 수 있습니다. 제조업체의 사양에 따라 부품을 정렬하십시오.
- 4. 냉방 및 환기: 과열을 방지하기 위해 적절한 냉각 및 환기를 유지하세요. 냉각 팬과 통풍구가 깨끗하고 막히지 않았는지 확인하세요.
- 5. 씰 유지 관리: 오염 물질이 감속기에 유입되는 것을 방지하기 위해 필요에 따라 씰을 검사하고 교체하십시오. 오염 물질은 마모를 가속화하고 성능을 저하시킬 수 있습니다.
- 6. 볼트 및 패스너: 작동 중 느슨해짐으로 인해 정렬 불량이나 부품 손상이 발생하는 것을 방지하기 위해 볼트와 패스너를 정기적으로 점검하고 조이십시오.
- 7. 마모된 부품 교체: 기어, 베어링, 씰 등 마모되거나 손상된 구성품은 제조업체의 정품 부품으로 교체하세요.
- 8. 진동 분석: 잠재적인 문제를 조기에 파악하기 위해 주기적인 진동 분석을 실시하십시오. 과도한 진동은 정렬 불량이나 부품 마모를 나타낼 수 있습니다.
- 9. 유지 관리 기록: 윤활 일정, 검사 날짜, 부품 교체 등을 포함한 자세한 유지 관리 기록을 보관하십시오. 이를 통해 감속기 이력을 추적하고 향후 유지 관리 계획을 세우는 데 도움이 됩니다.
- 10. 훈련: 유지 보수 인력에게 기어 감속기 유지 보수 및 문제 해결 기술에 대한 적절한 교육을 제공합니다.
이러한 유지 관리 관행을 준수하면 기어 감속기의 수명을 극대화하고, 가동 중지 시간을 최소화하며, 산업 공정에서 안정적인 작동을 보장할 수 있습니다.
Can you explain the different types of gear reducers available in the market?
There are several types of gear reducers commonly used in industrial applications:
1. Spur Gear Reducers: These reducers have straight teeth and are cost-effective for applications requiring moderate torque and speed reduction. They are efficient but may produce more noise compared to other types.
2. Helical Gear Reducers: Helical gears have angled teeth, which provide smoother and quieter operation compared to spur gears. They offer higher torque capacities and are suitable for heavy-duty applications.
3. Bevel Gear Reducers: Bevel gears have conical shapes and intersect at an angle, allowing them to transmit power between non-parallel shafts. They are commonly used in applications where shafts intersect at 90 degrees.
4. Worm Gear Reducers: Worm gears consist of a worm (screw) and a mating gear (worm wheel). They offer high torque reduction and are used for applications requiring high ratios, although they can be less efficient.
5. Planetary Gear Reducers: These reducers use a system of planetary gears to achieve high torque output in a compact design. They provide excellent torque multiplication and are commonly used in robotics and automation.
6. Cycloidal Gear Reducers: Cycloidal drives use an eccentric cam to achieve speed reduction. They offer high shock load resistance and are suitable for applications with frequent starting and stopping.
7. Harmonic Drive Reducers: Harmonic drives use a flexible spline to achieve high gear reduction ratios. They provide high precision and are commonly used in applications requiring accurate positioning.
8. Hypoid Gear Reducers: Hypoid gears have helical teeth and non-intersecting shafts, making them suitable for applications with space limitations. They offer high torque and efficiency.
Each type of gear reducer has its own advantages and limitations, and the choice depends on factors such as torque requirements, speed ratios, noise levels, space constraints, and application-specific needs.
editor by CX 2023-11-20
