제품 설명
PLANETX planetary reduce
Planetary reducer square flange:
Planetary reducer is widely used in industrial products due to its small size, light weight, large torque, wide speed ratio range, high rigidity, high precision, high transmission efficiency, maintenance free and other characteristics.
The planetary reducer structure is composed of a sun gear and a planet gear to form an external mesh, and a planet gear and an internal gear ring to form an internal mesh, so that the planet gear can realize revolution while realizing self rotation and maximum transmission of guarantee force; The minimum speed ratio of single-stage reduction is 3, and the maximum speed ratio is generally not more than 10. Common reduction ratios are 3, 4, 5, 6, 7, 8, and 10. The number of reducer stages is generally not more than 3, and the speed ratio is not more than 1.
Most planetary reducers are used with servo motors to reduce speed, increase torque, increase inertia, and ensure return accuracy (the higher the return accuracy, the higher the price). The maximum rated input speed of planetary reducers can reach 12000 rpm (depending on the size of the reducer itself, the larger the reducer, the smaller the rated input speed), and the operating temperature is generally between – 40 ºC and 120 ºC.
High Performance Planetary Gear Motor Precision Speed Reducer WAB060 Design Planetary Gearbox
1.Planetary carrier and output shaft are intergrated structure to ensure maximum torsional rigidity. 2.Planetary wheel with full needle design, increase the contact area to improve the rigidity and output torque. 3.The Gear adopts low carbon alloy steel, through carburizing and quenching, surface hardness is HRC62, anti-impact and strong abrasion resistance. 4.Gears refer to foreign imported software-assisted design to obtain the best tooth shape to reduce noise. 5.The input terminal is connected to the motor shaft in a double-tight manner to obtain the maximum clamping force and zero backlash power transmission. 6.Adopt spiral bevel gear design, allow high output torque, more than 30% higher than straight bevel gear. 7.High tolerance input speed, more than 8 times higher than straight bevel gear input. 8.The meshing tooth imprint of spiral bevel gear has been optimized by optimum design, and the contact tooth surface load is uniform, and long running life. 9.Bevel gears are meshed by optimum motion error analysis and strict process control to ensure high precision running backlash. 10.IP65, anti-dust, anti-water; low backlash, <3arcmin; low noise, <58dB 11.high efficiency(96%);Gear grinding process;easy motor mounting;life-time lubrication;various figure diameters.
Q: How to get a quick quote
A: Please provide the following information when contacting us
- Motor brand
- Motor model
- Motor dimension drawing
- What is the gear ratio
Q: How long is your delivery date
A: We all install it now, but it takes 3-5 days if it is not non-standard. Non standard 10-15 days, depending on the specific situation
Q:Do you provide samples, free or extra
A: A: You can reserve 1 first, and purchase it on demand
| 애플리케이션: | Machinery |
|---|---|
| 경도: | 경화된 치아 표면 |
| 설치: | Any |
| 공들여 나열한 것: | 같은 축의 |
| Gear Shape: | Cylindrical Gear |
| 단계: | 1-3 |
| 사용자 정의: |
사용 가능
| 맞춤형 요청 |
|---|
Can you provide real-world examples of products that use gear reducer technology?
Certainly! Gear reducer technology is widely used in various industries and products to enhance performance and efficiency. Here are some real-world examples:
1. Industrial Machinery: Gear reducers are commonly used in manufacturing machinery, such as conveyor systems, material handling equipment, and assembly lines, where they help control speed and torque for precise operations.
2. Wind Turbines: Wind turbines utilize gear reducers to transform the low rotational speed of the wind turbine rotor into the higher speed needed for electricity generation, optimizing energy conversion.
3. Automotive Transmissions: Automobiles use gear reducers as part of their transmissions to optimize power delivery from the engine to the wheels, allowing the vehicle to operate efficiently at different speeds.
4. Robotics: Robotic systems rely on gear reducers to control the movement and articulation of robot arms, enabling precise and controlled motion for various applications.
5. Printing Presses: Gear reducers are integral to printing presses, ensuring accurate and synchronized movement of printing plates, rollers, and paper feed mechanisms.
6. Conveyor Belts: Conveyor systems in industries like mining, agriculture, and logistics use gear reducers to regulate the movement of materials along the conveyor belts.
7. Packaging Machinery: Gear reducers play a crucial role in packaging machines, controlling the speed and movement of packaging materials, filling mechanisms, and sealing components.
8. Cranes and Hoists: Cranes and hoists rely on gear reducers to lift heavy loads with precision and control, ensuring safe and efficient material handling.
9. Pumps and Compressors: Gear reducers are utilized in pumps and compressors to regulate fluid flow and pressure, optimizing energy usage in fluid transportation systems.
10. Agriculture Equipment: Tractors and other agricultural machinery use gear reducers to adjust the speed and power delivery for different tasks, such as plowing, planting, and harvesting.
These examples demonstrate the diverse applications of gear reducer technology across various industries, showcasing their role in enhancing efficiency, control, and performance in a wide range of products and systems.
기어 감속기의 수명을 연장하기 위해서는 어떤 유지관리 관행이 필수인가요?
적절한 유지관리는 감속기의 수명을 연장하고 최적의 성능을 보장하는 데 매우 중요합니다. 필수적인 유지관리 방법은 다음과 같습니다.
- 1. 윤활: 기어 감속기의 정기적인 윤활은 마찰, 마모 및 발열을 줄이는 데 필수적입니다. 권장 윤활제를 사용하고 제조업체의 윤활 주기 지침을 준수하십시오.
- 2. 검사: 기어 감속기의 마모, 손상 또는 누출 징후를 정기적으로 점검하십시오. 작동 중 비정상적인 소음, 진동 또는 온도 상승이 있는지 확인하십시오.
- 3. 정렬: 입력축과 출력축의 정렬을 올바르게 하십시오. 정렬이 잘못되면 마모, 소음 증가 및 효율 저하로 이어질 수 있습니다. 제조업체의 사양에 따라 부품을 정렬하십시오.
- 4. 냉방 및 환기: 과열을 방지하기 위해 적절한 냉각 및 환기를 유지하세요. 냉각 팬과 통풍구가 깨끗하고 막히지 않았는지 확인하세요.
- 5. 씰 유지 관리: 오염 물질이 감속기에 유입되는 것을 방지하기 위해 필요에 따라 씰을 검사하고 교체하십시오. 오염 물질은 마모를 가속화하고 성능을 저하시킬 수 있습니다.
- 6. 볼트 및 패스너: 작동 중 느슨해짐으로 인해 정렬 불량이나 부품 손상이 발생하는 것을 방지하기 위해 볼트와 패스너를 정기적으로 점검하고 조이십시오.
- 7. 마모된 부품 교체: 기어, 베어링, 씰 등 마모되거나 손상된 구성품은 제조업체의 정품 부품으로 교체하세요.
- 8. 진동 분석: 잠재적인 문제를 조기에 파악하기 위해 주기적인 진동 분석을 실시하십시오. 과도한 진동은 정렬 불량이나 부품 마모를 나타낼 수 있습니다.
- 9. 유지 관리 기록: 윤활 일정, 검사 날짜, 부품 교체 등을 포함한 자세한 유지 관리 기록을 보관하십시오. 이를 통해 감속기 이력을 추적하고 향후 유지 관리 계획을 세우는 데 도움이 됩니다.
- 10. 훈련: 유지 보수 인력에게 기어 감속기 유지 보수 및 문제 해결 기술에 대한 적절한 교육을 제공합니다.
이러한 유지 관리 관행을 준수하면 기어 감속기의 수명을 극대화하고, 가동 중지 시간을 최소화하며, 산업 공정에서 안정적인 작동을 보장할 수 있습니다.
What are the benefits of using a gear reducer in industrial applications?
Gear reducers offer several benefits that make them indispensable in various industrial applications:
1. Speed Reduction: Gear reducers allow the reduction of high-speed input from motors or engines to lower, more usable output speeds for specific applications, ensuring proper equipment operation and safety.
2. Torque Increase: By leveraging the mechanical advantage of gear ratios, gear reducers can significantly increase torque output, enabling the handling of heavy loads and providing the necessary power for tasks such as lifting, conveying, and processing.
3. Precise Control: Gear reducers enable fine-tuning of rotational speed and torque, providing precise control over machinery and processes, which is crucial in industries like manufacturing, material handling, and robotics.
4. Shock Load Absorption: Gear reducers can absorb and dampen sudden shocks or changes in load, protecting both the machinery and connected components from abrupt forces that could otherwise lead to damage.
5. Versatility: With various gear types (e.g., spur, helical, worm) and designs, gear reducers can be tailored to different applications, including those requiring specific speed ratios, torque ranges, and environmental conditions.
6. Efficient Power Transmission: Gear reducers offer high mechanical efficiency, minimizing energy loss during power transmission, which is especially valuable in energy-conscious industries.
7. Compact Design: Gear reducers provide a compact solution for transmitting power and adjusting speeds, making them suitable for installations with space constraints.
8. Reliability and Longevity: Well-designed and properly maintained gear reducers can offer extended service life, contributing to reduced downtime and maintenance costs.
Overall, gear reducers enhance the performance, efficiency, and reliability of industrial equipment, making them essential components in a wide range of applications across various industries.
editor by CX 2023-09-15
