China Best Sales Wrv-6e Cycloidal Pin Gear Reducer for DC Motor Fubao best automatic gearbox

Опис производа

Опис производа

HangZhou Fubao Electromechanical Technology Co., Ltd.price negotiable High Precision Cycloidal Pin Gear Reducer Reduction Gearbox for DC Motor  Installed with radial thrust ball bearings, so it can support external load, torque rigidity, large allowable torque, can reduce the number of components required, easy installation. The revolution speed of WRV gears is slower and vibration is reduced, which can reduce the motor structure (input gear) and inertia.
High Precision Cycloidal Pin Gear Reducer reduction gearbox High precision, high rigidity, high torque, high load and other characteristics realize hollow design at the same time. After being hollowed out, the ease of use of the product is improved due to the variety of piping and cable layout options.

The High Precision Cycloidal Pin Gear Reducer reduction gearbox  is developed on the basis of the traditional needle wheel reducer. It not only overcomes the shortcomings of the general needle pendulum transmission, but also has more advantages, such as long life, stable precision, high efficiency, smooth transmission, small size, Light weight, large reduction ratio range, etc. This RV reducer from FUBAO adopts a double support support mechanism and a pinwheel mechanism, even if a torque up to 6 times the rated torque is applied, the product will not be damaged, and the torsional rigidity is very large. Small backlash, small volume, large torque. In order to directly support large loads, main bearings (large angular contact ball bearings) are installed inside.

High Precision Cycloidal Pin Gear Reducer reduction gearbox  mainly has the following characteristics:

A. Main bearing built-in mechanism
1. Improved reliability;
2. Total cost reduction;
3. Radial thrust ball bearings are installed, so they can support external loads, and the moment rigidity and allowable moment are large, which can reduce the number of required components;
4. The use of couplings and motor flanges makes the installation of the motor very simple.

B. 2-stage deceleration mechanism
1. Small vibration;
2. The revolution speed of the gear is slowed down, the vibration is reduced, and the direct connection part of the motor (input gear) can be reduced, and the inertia can be reduced.

C. Double column support mechanism
1. High torsional rigidity;
2. Strong impact resistance;
3. The crank shaft is supported by double columns in the reducer.

D. Rolling contact mechanism
1. Excellent starting power;
2. Small abrasion and long service life;
3. Small backlash (1arc.min).

Детаљне фотографије

Product Details

Basic Information

Application Case

Company Profile

Factory Display

Честа питања

Q: Speed reducer grease replacement time

A: When sealing appropriate amount of grease and running reducer, the standard replacement time is 20000 hours according to the aging condition of the grease. In addition, when the grease is stained or used in the surrounding temperature condition (above 40ºC), please check the aging and fouling of the grease, and specify the replacement time.

Q: Delivery time
A: Fubao has 2000+ production base, daily output of 1000+ units, standard models within 7 days of delivery.

Q: Reducer selection
A: Fubao provides professional product selection guidance, with higher product matching degree, higher cost performance and higher utilization rate.

Q: Application range of reducer
A: Fubao has a professional research and development team, complete category design, can match any stepping motor, servo motor, more accurate matching.

Које су мере одржавања неопходне за продужење века трајања редуктора зупчаника?

Правилно одржавање је кључно за продужење животног века и обезбеђивање оптималних перформанси редуктора. Ево основних пракси одржавања:

• 1. Подмазивање: Редовно подмазивање редуктора је од виталног значаја за смањење трења, хабања и стварања топлоте. Користите препоручено мазиво и пратите упутства произвођача за интервале подмазивања.
• 2. Инспекција: Редовно проверавајте редукторе зупчаника да ли имају знаке хабања, оштећења или цурења. Проверите да ли има необичних звукова, вибрација или повећања температуре током рада.
• 3. Поравнање: Обезбедите правилно поравнање улазног и излазног вратила. Непоравнање може довести до повећаног хабања, буке и смањене ефикасности. Поравнајте компоненте према спецификацијама произвођача.
• 4. Хлађење и вентилација: Одржавајте правилно хлађење и вентилацију како бисте спречили прегревање. Уверите се да су вентилатори и отвори за хлађење чисти и неометани.
• 5. Одржавање заптивача: Проверите и замените заптивке по потреби како бисте спречили улазак загађивача у редуктор. Загађивачи могу довести до убрзаног хабања и смањења перформанси.
• 6. Вијци и причвршћивачи: Regularly check and tighten bolts and fasteners to prevent loosening during operation, which can cause misalignment or component damage.
• 7. Replacing Worn Components: Replace worn or damaged components, such as gears, bearings, and seals, with genuine parts from the manufacturer.
• 8. Vibratio
  

  Are there any disadvantages or limitations to using gear reducer systems?

  While gear reducer systems offer numerous advantages, they also come with certain disadvantages and limitations that should be considered during the selection and implementation process:

  1. Size and Weight: Gear reducers can be bulky and heavy, especially for applications requiring high gear ratios. This can impact the overall size and weight of the machinery or equipment, which may be a concern in space-constrained environments.

  2. Efficiency Loss: Despite their high efficiency, gear reducers can experience energy losses due to friction between gear teeth and other components. This can lead to a reduction in overall system efficiency, particularly in cases where multiple gear stages are used.

  3. Cost: The design, manufacturing, and assembly of gear reducers can involve complex processes and precision machining, which can contribute to higher initial costs compared to other power transmission solutions.

  4. Maintenance: Gear reducer systems require regular maintenance, including lubrication, inspection, and potential gear replacement over time. Maintenance activities can lead to downtime and associated costs in industrial settings.

  5. Noise and Vibration: Gear reducers can generate noise and vibrations, especially at high speeds or when operating under heavy loads. Additional measures may be needed to mitigate noise and vibration issues.

  6. Limited Gear Ratios: While gear reducers offer a wide range of gear ratios, there may be limitations in achieving extremely high or low ratios in certain designs.

  7. Temperature Sensitivity: Extreme temperatures can affect the performance of gear reducer systems, particularly if inadequate lubrication or cooling is provided.

  8. Shock Loads: While gear reducers are designed to handle shock loads to some extent, severe shock loads or abrupt changes in torque can still lead to potential damage or premature wear.

  Despite these limitations, gear reducer systems remain widely used and versatile components in various industries, and their disadvantages can often be mitigated through proper design, selection, and maintenance practices.

  n Analysis: Conduct periodic vibration analysis to identify potential issues early. Excessive vibration can indicate misalignment or component wear.

• 9. Maintenance Records: Keep detailed maintenance records, including lubrication schedules, inspection dates, and component replacements. This helps track the history of the gear reducer and aids in future maintenance planning.
• 10. Training: Provide proper training to maintenance personnel on gear reducer maintenance and troubleshooting techniques.

By adhering to these maintenance practices, you can maximize the lifespan of your gear reducers, minimize downtime, and ensure reliable operation in your industrial processes.