Опис производа
HB Series Heavy-duty Industrial Gearbox
Карактеристике:
-
Realized parallel shaft,right-angle shaft modes and horizontal,vertical mounting modes. Using less component parts.
-
Applying advanced grinding process which improved the stability and the efficiency of transmit power with lower noise.
-
Input mode: motor connected flange, shaft input
-
Output mode:solid shaft with flat key,hollow shaft with flat key,hollow shaft with shrink disk,hollow shaft with spline connection, CHINAMFG shaft with spline connection, CHINAMFG shaft with flange.
-
Mounting mode:vertical, horizontal, swing base-mounted, torque-arm-mounted.
-
Ratio range:1.23~450. It can be higher when combining with K&R series reducer.
Materials of H series gearbox
| Housing: |
HT250 cast iron |
| Gear: |
20CrMnTi H, high grade allo with carburization |
| surface hardness: |
58-62HRC |
| center hardness: |
33-48HRC |
| Grinding precision grade: | ISO1328-1: 1995 class 5-6 |
| surfaceness: |
0.8 |
| carburization depth: |
0.6-1.5mm |
| Bearing: |
42CrMo |
Technical data:
| Моћ | 4-5N. M |
| Transmission stage | 1 stage, 2 stage, 3 stage, 4 stage |
| Mounting position | Vertical, horizontal |
Related Products
Company Information
| Примена: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car |
|---|---|
| Функција: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction |
| Распоред: | Coaxial |
| Тврдоћа: | Очвршћена површина зуба |
| Инсталација: | Хоризонтални тип |
| Корак: | Steel |
| Узорци: |
US$ 45/Piece
1 комад (минимална поруџбина) | |
|---|
How do gear reducers contribute to energy efficiency in machinery and equipment?
Gear reducers play a significant role in enhancing energy efficiency in various machinery and equipment. Here’s how they contribute:
1. Смањење брзине: Gear reducers are commonly used to reduce the speed of the input shaft, allowing the motor to operate at a higher speed where it’s most efficient. This speed reduction helps match the motor’s optimal operating range, reducing energy consumption.
2. Torque Increase: Gear reducers can increase torque output while decreasing speed, enabling machinery to handle higher loads without the need for a larger, more energy-intensive motor.
3. Matching Load Requirements: By adjusting gear ratios, gear reducers ensure that the machinery’s output speed and torque match the load requirements. This prevents the motor from operating at unnecessary high speeds, saving energy.
4. Variable Speed Applications: In applications requiring variable speeds, gear reducers allow for efficient speed control without the need for continuous motor adjustments, improving energy usage.
5. Efficient Power Transmission: Gear reducers efficiently transmit power from the motor to the load, minimizing energy losses due to friction and inefficiencies.
6. Motor Downsizing: Gear reducers enable the use of smaller, more energy-efficient motors by converting their higher speed, lower torque output into the lower speed, higher torque needed for the application.
7. Decoupling Motor and Load Speeds: In cases where the motor and load speeds are inherently different, gear reducers ensure the motor operates at its most efficient speed while still delivering the required output to the load.
8. Overcoming Inertia: Gear reducers help overcome the inertia of heavy loads, making it easier for motors to start and stop, reducing energy consumption during frequent operation.
9. Precise Control: Gear reducers provide precise control over speed and torque, optimizing the energy consumption of machinery in processes that require accurate adjustments.
10. Regenerative Braking: In some applications, gear reducers can be used to capture and convert kinetic energy back into electrical energy during braking or deceleration, improving overall energy efficiency.
By efficiently managing speed, torque, and power transmission, gear reducers contribute to energy-efficient operation, reducing energy consumption, and minimizing the environmental impact of machinery and equipment.
How do gear reducers ensure efficient power transmission and motion control?
Gear reducers play a vital role in ensuring efficient power transmission and precise motion control in various industrial applications. They achieve this through the following mechanisms:
- 1. Speed Reduction/Increase: Gear reducers allow you to adjust the speed between the input and output shafts. Speed reduction is essential when the output speed needs to be lower than the input speed, while speed increase is used when the opposite is required.
- 2. Torque Amplification: By altering the gear ratio, gear reducers can amplify torque from the input to the output shaft. This enables machinery to handle higher loads and provide the necessary force for various tasks.
- 3. Gear Train Efficiency: Well-designed gear trains within reducers minimize power losses during transmission. Helical and spur gears, for example, offer high efficiency by distributing load and reducing friction.
- 4. Precision Motion Control: Gear reducers provide precise control over rotational motion. This is crucial in applications where accurate positioning, synchronization, or timing is required, such as in robotics, CNC machines, and conveyor systems.
- 5. Backlash Reduction: Some gear reducers are designed to minimize backlash, which is the play between gear teeth. This reduction in play ensures smoother operation, improved accuracy, and better control.
- 6. Load Distribution: Gear reducers distribute the load evenly among multiple gear teeth, reducing wear and extending the lifespan of the components.
- 7. Shock Absorption: In applications where sudden starts, stops, or changes in direction occur, gear reducers help absorb and dampen shocks, protecting the machinery and ensuring reliable operation.
- 8. Compact Design: Gear reducers provide a compact solution for achieving specific speed and torque requirements, allowing for space-saving integration into machinery.
By combining these principles, gear reducers facilitate the efficient and controlled transfer of power, enabling machinery to perform tasks accurately, reliably, and with the required force, making them essential components in a wide range of industries.
Како редуктори зупчаника подносе варијације улазних и излазних брзина?
Редуктори зупчаника су дизајнирани да поднесу варијације улазних и излазних брзина коришћењем различитих преносних односа и конфигурација. То постижу коришћењем међусобно повезаних зупчаника различитих величина за пренос обртног момента и контролу брзине ротације.
Основни принцип подразумева повезивање два или више зупчаника са различитим бројем зубаца. Када већи зупчаник (погонски зупчаник) уђе у захват са мањим зупчаником (гоњеним зупчаником), брзина ротације гоњеног зупчаника се смањује, док се обртни момент повећава. Ово смањење брзине и повећање обртног момента омогућавају редукторима зупчаника да се ефикасно прилагоде варијацијама улазних и излазних брзина.
Преносни однос је кључни фактор у одређивању колико се мењају брзина и обртни момент. Израчунава се дељењем броја зубаца на погонском зупчанику са бројем зубаца на погонском зупчанику. Већи преносни однос резултира већим смањењем брзине и пропорционалним повећањем обртног момента.
Планетарни редуктори, уобичајени тип, користе комбинацију зупчаника, укључујући централне зупчанике, планетарне зупчанике и прстенасте зупчанике, како би се постигла различита смањења брзине и побољшања обртног момента. Овај дизајн пружа свестраност у руковању варијацијама брзине и захтева обртног момента.
Укратко, редуктори зупчаника обрађују варијације улазних и излазних брзина користећи специфичне преносне односе и распореде зупчаника који им омогућавају ефикасно преношење снаге и контролу карактеристика кретања у складу са потребама примене.
editor by CX 2023-09-14
