Ürün Açıklaması
HB Series Heavy-duty Industrial Gearbox
Özellikler:
-
Realized parallel shaft,right-angle shaft modes and horizontal,vertical mounting modes. Using less component parts.
-
Applying advanced grinding process which improved the stability and the efficiency of transmit power with lower noise.
-
Input mode: motor connected flange, shaft input
-
Output mode:solid shaft with flat key,hollow shaft with flat key,hollow shaft with shrink disk,hollow shaft with spline connection, CHINAMFG shaft with spline connection, CHINAMFG shaft with flange.
-
Mounting mode:vertical, horizontal, swing base-mounted, torque-arm-mounted.
-
Ratio range:1.23~450. It can be higher when combining with K&R series reducer.
Materials of H series gearbox
| Housing: |
HT250 cast iron |
| Gear: |
20CrMnTi H, high grade allo with carburization |
| surface hardness: |
58-62HRC |
| center hardness: |
33-48HRC |
| Grinding precision grade: | ISO1328-1: 1995 class 5-6 |
| surfaceness: |
0.8 |
| carburization depth: |
0.6-1.5mm |
| Bearing: |
42CrMo |
Technical data:
| Power | 4-5N. M |
| Transmission stage | 1 stage, 2 stage, 3 stage, 4 stage |
| Mounting position | Vertical, horizontal |
Related Products
Company Information
| Başvuru: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car |
|---|---|
| İşlev: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction |
| Düzen: | Koaksiyel |
| Sertlik: | Sertleştirilmiş Diş Yüzeyi |
| Kurulum: | Yatay Tip |
| Adım: | Çelik |
| Örnekler: |
US$ 45/Piece
1 Adet (Min.Sipariş) | |
|---|
How do gear reducers contribute to energy efficiency in machinery and equipment?
Gear reducers play a significant role in enhancing energy efficiency in various machinery and equipment. Here’s how they contribute:
1. Speed Reduction: Gear reducers are commonly used to reduce the speed of the input shaft, allowing the motor to operate at a higher speed where it’s most efficient. This speed reduction helps match the motor’s optimal operating range, reducing energy consumption.
2. Torque Increase: Gear reducers can increase torque output while decreasing speed, enabling machinery to handle higher loads without the need for a larger, more energy-intensive motor.
3. Matching Load Requirements: By adjusting gear ratios, gear reducers ensure that the machinery’s output speed and torque match the load requirements. This prevents the motor from operating at unnecessary high speeds, saving energy.
4. Variable Speed Applications: In applications requiring variable speeds, gear reducers allow for efficient speed control without the need for continuous motor adjustments, improving energy usage.
5. Efficient Power Transmission: Gear reducers efficiently transmit power from the motor to the load, minimizing energy losses due to friction and inefficiencies.
6. Motor Downsizing: Gear reducers enable the use of smaller, more energy-efficient motors by converting their higher speed, lower torque output into the lower speed, higher torque needed for the application.
7. Decoupling Motor and Load Speeds: In cases where the motor and load speeds are inherently different, gear reducers ensure the motor operates at its most efficient speed while still delivering the required output to the load.
8. Overcoming Inertia: Gear reducers help overcome the inertia of heavy loads, making it easier for motors to start and stop, reducing energy consumption during frequent operation.
9. Precise Control: Gear reducers provide precise control over speed and torque, optimizing the energy consumption of machinery in processes that require accurate adjustments.
10. Regenerative Braking: In some applications, gear reducers can be used to capture and convert kinetic energy back into electrical energy during braking or deceleration, improving overall energy efficiency.
By efficiently managing speed, torque, and power transmission, gear reducers contribute to energy-efficient operation, reducing energy consumption, and minimizing the environmental impact of machinery and equipment.
How do gear reducers ensure efficient power transmission and motion control?
Gear reducers play a vital role in ensuring efficient power transmission and precise motion control in various industrial applications. They achieve this through the following mechanisms:
- 1. Speed Reduction/Increase: Gear reducers allow you to adjust the speed between the input and output shafts. Speed reduction is essential when the output speed needs to be lower than the input speed, while speed increase is used when the opposite is required.
- 2. Tork Amplifikasyonu: By altering the gear ratio, gear reducers can amplify torque from the input to the output shaft. This enables machinery to handle higher loads and provide the necessary force for various tasks.
- 3. Gear Train Efficiency: Well-designed gear trains within reducers minimize power losses during transmission. Helical and spur gears, for example, offer high efficiency by distributing load and reducing friction.
- 4. Precision Motion Control: Gear reducers provide precise control over rotational motion. This is crucial in applications where accurate positioning, synchronization, or timing is required, such as in robotics, CNC machines, and conveyor systems.
- 5. Backlash Reduction: Some gear reducers are designed to minimize backlash, which is the play between gear teeth. This reduction in play ensures smoother operation, improved accuracy, and better control.
- 6. Load Distribution: Gear reducers distribute the load evenly among multiple gear teeth, reducing wear and extending the lifespan of the components.
- 7. Shock Absorption: In applications where sudden starts, stops, or changes in direction occur, gear reducers help absorb and dampen shocks, protecting the machinery and ensuring reliable operation.
- 8. Compact Design: Gear reducers provide a compact solution for achieving specific speed and torque requirements, allowing for space-saving integration into machinery.
By combining these principles, gear reducers facilitate the efficient and controlled transfer of power, enabling machinery to perform tasks accurately, reliably, and with the required force, making them essential components in a wide range of industries.
Redüktörler giriş ve çıkış hızlarındaki değişiklikleri nasıl yönetir?
Dişli redüktörleri, farklı dişli oranları ve konfigürasyonları kullanılarak giriş ve çıkış hızlarındaki değişimleri karşılamak üzere tasarlanmıştır. Bunu, torku iletmek ve dönüş hızını kontrol etmek için farklı boyutlarda birbirine geçen dişliler kullanarak gerçekleştirirler.
Temel prensip, farklı diş sayısına sahip iki veya daha fazla dişlinin birbirine bağlanmasıdır. Daha büyük bir dişli (tahrik dişlisi) daha küçük bir dişliyle (tahrik edilen dişli) temas ettiğinde, tahrik edilen dişlinin dönüş hızı azalırken tork artar. Bu hız düşüşü ve tork artışı, dişli redüktörlerinin giriş ve çıkış hızlarındaki değişikliklere verimli bir şekilde uyum sağlamasını sağlar.
Dişli oranı, hız ve torkun ne kadar değişeceğini belirleyen kritik bir faktördür. Tahrik dişlisindeki diş sayısının tahrik dişlisindeki diş sayısına bölünmesiyle hesaplanır. Daha yüksek bir dişli oranı, hızda daha fazla azalma ve buna orantılı olarak torkta bir artışla sonuçlanır.
Yaygın bir tip olan planet dişli redüktörleri, farklı hız düşüşleri ve tork artışları elde etmek için güneş dişlileri, planet dişlileri ve halka dişlileri gibi dişlilerin bir kombinasyonunu kullanır. Bu tasarım, hız ve tork gereksinimlerindeki değişikliklerin üstesinden gelmede çok yönlülük sağlar.
Özetle, dişli redüktörleri, uygulamanın ihtiyaçlarına göre gücü verimli bir şekilde iletmelerini ve hareket özelliklerini kontrol etmelerini sağlayan belirli dişli oranları ve dişli düzenlemeleri kullanarak giriş ve çıkış hızlarındaki değişiklikleri yönetir.
editor by CX 2023-09-14
