Ürün Açıklaması
Ürün Açıklaması
Shaft Mounted Gear Reducer speed gearbox reducer
Components:
1. Housing: Nodular Cast Iron(Ductile Iron) QT600
2. Gears Profile: Hardened Helical Gears
3. Gears Material: 20CrMnTi
4. Gears Processing: Carburizing, Quenching, Grinding
5. Gears Hardness: Surface Hardness: HRC58-62, Inner Hardness: HBS156-207
6. Gears Accuracy: 6 Class
7. Shafts Material: 40Cr
8. Input Configurations:
Keyed CHINAMFG Shaft Input
IEC Normalized Motor Flange
9. Output Configurations:
Keyed Hollow Shaft Output
10. Oil Seal: ZheJiang SOG
11. Bearings: ZWZ, LYC
12. Spare Parts: Torque arm, Optional Backstop
The features of ATA shaft mounted gearbox:
Mounting Type: Tie rod Hanging shaft mounted
Output Shaft: Single key hollow shaft, each model can select 3 hollow diameter at most.
Gearbox Housing: Hard Iron Steel, can be used outside.
Anti-slip device: Can suit for any model, It’s very convenient to be mounted.
The maintenance of ATA shaft mounted gearbox:
1. Before starting the reducer must be filled of N159 or N220 extreme pressure industrial gear oils, till the gearbox oil shows an intermediate position
2. After 3 months running, the gearbox need to change oil, attention it must be debris inside the machine rinse before adding new oil.
3. At the reducer hollow shaft ends and drive pulley end gland plate must fastened with locking screws.
4. The reducer pulley and the motor pulley must be parallel when they are installed and the belt tightness should be moderate.
Ayrıntılı Fotoğraflar
| Rated Power |
1.1~193KW |
| Intput Speed |
500~1400r/min |
| Çıkış Hızı |
25~300r/min |
| Oran |
IN=5.0…31.5 |
| Installation Form |
Shaft mounted |
The models of ATA shafted mounted gearbox:
1 Stage: ATA30, ATA35, ATA40, ATA45, ATA50, ATA60, ATA70, ATA80, ATA100, ATA125
2 Stage: ATA35D, ATA40D, ATA45D, ATA50D, ATA60D, ATA70D, ATA80D, ATA100D, ATA125D
Ürün Parametreleri
Gearbox Parameters:
| Models | Output Bore Dia. | Maximum Torque | Nominal Ratio(i) |
| ATA30 | 30mm | 180Nm | 5
7 10 12.5 15 20 25 31 |
| ATA35 | 35mm | 420Nm | |
| ATA40 | 40mm/45mm | 950Nm | |
| ATA45 | 45mm/50mm/55mm | 1400Nm | |
| ATA50 | 50mm/55mm/60mm | 2300Nm | |
| ATA60 | 60mm/70mm | 3600Nm | |
| ATA70 | 70mm/85mm | 5100Nm | |
| ATA80 | 80mm/100mm | 7000Nm | |
| ATA100 | 100mm/125mm | 11000Nm | |
| ATA125 | 125mm/135mm | 17000Nm |
Certifications
Packaging & Shipping
Packaging & Delivery
ATA series gear reducer Packaging Details:Plastic Bags, Cartons, Wooden Boxes
Port:ZheJiang /HangZhou
Şirket Profili
Avantajlarımız
Our Services:
| Pre-sale services | 1. Select equipment model. |
| 2.Design and manufacture products according to clients’ special requirement. | |
| 3.Train technical personal for clients | |
| Services during selling | 1.Pre-check and accept products ahead of delivery. |
| 2. Help clients to draft solving plans. | |
| After-sale services | 1.Assist clients to prepare for the first construction scheme. |
| 2. Train the first-line operators. | |
| 3.Take initiative to eliminate the trouble rapidly. | |
| 4. Provide technical exchanging. |
SSS
If you have any demand for our products please feel free to contact me
/* 22 Ocak 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Başvuru: | Motor, Machinery |
|---|---|
| İşlev: | Hız Değiştirme, Hız Azaltma |
| Düzen: | Parallel |
| Sertlik: | Hardened |
| Kurulum: | Torque Arm Type |
| Adım: | Single-Step |
| Özelleştirme: |
Mevcut
| Özelleştirilmiş İstek |
|---|
Üreticiler dişli redüktörlerinde dişli diş profillerinin hassasiyetini nasıl sağlarlar?
Üreticiler, optimum performans ve verimlilik için kritik öneme sahip olan dişli redüktörlerinde dişli diş profillerinin hassasiyetini sağlamak için çeşitli teknikler kullanırlar:
1. Hassas İşleme: Dişli dişleri genellikle yüksek doğruluk ve tekrarlanabilirlik seviyelerine ulaşabilen gelişmiş CNC (Bilgisayarlı Sayısal Kontrol) makineleri kullanılarak işlenir. Bu, birden fazla bileşende tutarlı dişli dişi profilleri sağlar.
2. Kalite Kontrol Önlemleri: Dişli diş profillerinin gerekli özellikleri karşıladığını doğrulamak için üretim sürecinin çeşitli aşamalarında boyutsal incelemeler ve profil ölçümleri gibi sıkı kalite kontrol süreçleri gerçekleştirilir.
3. Diş Profili Tasarımı: Mühendisler, hassas involüt şekillere ve doğru boyutlara sahip dişli profilleri tasarlamak için özel yazılım ve simülasyon araçları kullanır. Bu tasarımlar daha sonra üretim için makine talimatlarına dönüştürülür.
4. Malzeme Seçimi: İşleme ve operasyon sırasında deformasyon veya yanlışlık olasılığını en aza indirmek için mükemmel aşınma direncine ve boyut kararlılığına sahip yüksek kaliteli malzemeler seçilmiştir.
5. Isıl İşlem: Dişlilerin yüzey sertliğini ve dayanıklılığını artırmak, zamanla aşınma ve deformasyon riskini azaltmak için karbürleme ve söndürme gibi ısıl işlem prosesleri uygulanır.
6. Diş Gıcırdatma ve Bitirme: İlk işlemeden sonra, dişli dişleri genellikle istenen diş profili hassasiyetini ve yüzey kalitesini elde etmek için hassas taşlama ve son işlem işlemlerinden geçer.
7. İşlem Sonrası Denetim: Üretim süreçlerinden sonra dişli diş profilleri tekrar incelenerek son bileşenlerin belirtilen toleransları ve performans kriterlerini karşıladığı doğrulanır.
8. Bilgisayar Destekli Üretim (CAM): CAM yazılımı, takım yolları ve işleme talimatları oluşturmak için kullanılır ve dişli imalatı sırasında takım hareketleri ve malzeme kaldırma üzerinde hassas kontrol sağlar.
Üreticiler, bu teknikleri birleştirerek ve ileri üretim teknolojilerinden yararlanarak, dişli diş profillerinde gerekli hassasiyeti elde edebilir ve bunun sonucunda çeşitli endüstriyel uygulamalar için güvenilir ve verimli dişli redüktörleri üretebilirler.
What maintenance practices are essential for prolonging the lifespan of gear reducers?
Proper maintenance is crucial for extending the lifespan and ensuring optimal performance of gear reducers. Here are essential maintenance practices:
- 1. Lubrication: Regular lubrication of gear reducers is vital to reduce friction, wear, and heat generation. Use the recommended lubricant and follow the manufacturer’s guidelines for lubrication intervals.
- 2. Inspection: Routinely inspect gear reducers for signs of wear, damage, or leaks. Check for unusual noises, vibrations, or temperature increases during operation.
- 3. Alignment: Ensure proper alignment of the input and output shafts. Misalignment can lead to increased wear, noise, and reduced efficiency. Align the components according to the manufacturer’s specifications.
- 4. Cooling and Ventilation: Maintain proper cooling and ventilation to prevent overheating. Ensure that cooling fans and vents are clean and unobstructed.
- 5. Seal Maintenance: Inspect and replace seals as needed to prevent contaminants from entering the gear reducer. Contaminants can lead to accelerated wear and reduced performance.
- 6. Bolts and Fasteners: Regularly check and tighten bolts and fasteners to prevent loosening during operation, which can cause misalignment or component damage.
- 7. Replacing Worn Components: Replace worn or damaged components, such as gears, bearings, and seals, with genuine parts from the manufacturer.
- 8. Vibration Analysis: Conduct periodic vibration analysis to identify potential issues early. Excessive vibration can indicate misalignment or component wear.
- 9. Maintenance Records: Keep detailed maintenance records, including lubrication schedules, inspection dates, and component replacements. This helps track the history of the gear reducer and aids in future maintenance planning.
- 10. Training: Provide proper training to maintenance personnel on gear reducer maintenance and troubleshooting techniques.
By adhering to these maintenance practices, you can maximize the lifespan of your gear reducers, minimize downtime, and ensure reliable operation in your industrial processes.
What industries and machinery commonly utilize gear reducers?
Gear reducers are widely used across various industries and types of machinery for torque reduction and speed control. Some common industries and applications include:
- 1. Manufacturing: Gear reducers are used in manufacturing equipment such as conveyors, mixers, and packaging machines to control speed and transmit power efficiently.
- 2. Automotive: They are utilized in vehicles for applications like power transmission in transmissions and differentials.
- 3. Aerospace: Gear reducers are used in aircraft systems, including landing gear mechanisms and engine accessories.
- 4. Robotics and Automation: They play a crucial role in robotic arms, CNC machines, and automated production lines.
- 5. Mining and Construction: Gear reducers are used in heavy machinery like excavators, bulldozers, and crushers for power transmission and torque multiplication.
- 6. Energy and Power Generation: Wind turbines, hydroelectric generators, and other power generation equipment use gear reducers to convert rotational speed and transmit power.
- 7. Marine and Shipbuilding: They are used in ship propulsion systems, steering mechanisms, and anchor handling equipment.
- 8. Material Handling: Gear reducers are essential in conveyor systems, elevators, and hoists for controlled movement of materials.
- 9. Food and Beverage: They find applications in food processing equipment like mixers, grinders, and packaging machines.
- 10. Paper and Pulp: Gear reducers are used in machinery for pulp processing, paper production, and printing.
These examples represent just a fraction of the industries and machinery that benefit from the use of gear reducers to optimize power transmission and achieve the desired motion characteristics.
editor by CX 2024-04-23
