Ürün Açıklaması
PLDR/PLDR+60 Level 2
| STAGE Level | Level 2 | ||||||||||||||
| Reduction ratio | i | 15 | 16 | 20 | 25 | 30 | 35 | 40 | 50 | 60 | 70 | 80 | 100 | ||
| Nominal çıkış torku | T2N | Nm | 40 | 42 | 45 | 56 | 53 | 50 | 46 | 55 | 52 | 50 | 42 | 42 | |
| in.lb | 370 | 372 | 384 | 475 | 465 | 443 | 385 | 470 | 460 | 443 | 372 | 372 | |||
| Emergency braking torque Allow 1000 times in the working life of the gearbox |
T2NOt | Nm | 3 x NOM.Output | ||||||||||||
| in.lb | |||||||||||||||
| Anma giriş hızı (T2N, 20°C ambient temperature) |
N 1n | devir/dakika | 3000 | 3000 | 3000 | 3000 | 3000 | 3000 | 3000 | 3000 | 3000 | 3000 | 3000 | 3000 | |
| Maksimum giriş hızı | n 1max | devir/dakika | 6000 | 6000 | 6000 | 6000 | 6000 | 6000 | 6000 | 6000 | 6000 | 6000 | 6000 | 6000 | |
| Maximum return clearance | jt | yay dakikası | PLDR60≤8ARCMIN PLDR+60≤5ARCMIN Custom made≤3ARCMIN | ||||||||||||
| No-load torque (nt=3000rmp, gearbox 20°C) |
T 012 | Nm | 0.4 | 0.5 | 0.3 | 0.5 | 0.4 | 0.3 | 0.3 | 0.3 | 0.3 | 0.4 | 0.4 | 0.3 | |
| in.lb | 3.5 | 4.4 | 2.7 | 4.4 | 3.5 | 2.7 | 2.7 | 2.7 | 2.7 | 3.5 | 3.5 | 2.7 | |||
| Torsional rigidity | C t21 | Nm/ arcmin | 4 | ||||||||||||
| in.lb / arcmin | 31 | ||||||||||||||
| Maximum radial force | F 2AMAX | N | 1600 | ||||||||||||
| lbf | 360 | ||||||||||||||
| Maximum axial force | F 3RMAX | N | 1600 | ||||||||||||
| lbf | 360 | ||||||||||||||
| Maximum roll torque | M 2KMax | Nm | 152 | ||||||||||||
| in.lb | 1345 | ||||||||||||||
| Working life | Lh | hr | ≥20000 | ||||||||||||
| Efficiency at full load | η | % | 92 | ||||||||||||
| Ambient temperature | ºC | -15~40 | |||||||||||||
| F | 5~104 | ||||||||||||||
| The maximum allowable temperature of the shell | ºC | +90 | |||||||||||||
| F | 194 | ||||||||||||||
| Lubricating | Life Lubrication | ||||||||||||||
| The direction of rotation | Input and output in the same direction | ||||||||||||||
| Protection level | IP65 | ||||||||||||||
| Installation direction | Any | ||||||||||||||
| Working noise (i=10 and n1=3000rpm no load) | LPA dB(A) | ≤58 | |||||||||||||
| Rotary inertia | J1 | Kg.cm2 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | |
| 10-3in.lb.s2 | 0.80 | 0.80 | 0.80 | 0.80 | 0.80 | 0.80 | 0.80 | 0.80 | 0.80 | 0.80 | 0.80 | 0.80 | |||
Quick selection of size
PLDR(figure: i=4) PLDR/PLDR+ HIGH PRECISION(figure: i=4)
Applicable to periodic working days (ED≤60%) Applicable to periodic working days (ED≤60%)
Design & technology
Technical services:
- According to the relevant parameters provided by the customer, the CZPT engineering software is used to create the motion load curve diagram of the mechanism equipment to obtain the corresponding parameters and derive the motion load curve. Intuitively display important parameters and load indexes in the transmission system to help customers carry out reasonable structural design.
- SIGRINER provides a motor database from 500 servo motor manufacturers worldwide
Customer training:
We are honored to provide you with our applied computing and transmission design expertise. We can provide relevant training according to your needs.
Technical testing center
Industry application
- We provide fast supply and strong support all over the world through a complete sales and service network
- With years of rich experience, our authoritative experts provide market-leading consulting services for various industrial sectors
- Robotics, automation and manipulator technology
A variety of servo gearboxes and mechanical transmission systems, from economical to high-end models; can be applied to various robots and their auxiliary axes, such as transmission shafts and station control devices
- Printing machine
Innovative gearbox ensures stability, synchronization accuracy and long-term accuracy even at high speeds
The perfect solution for high-quality printing processes and other continuous duty applications
Option: integrated sensor for monitoring paper tension and similar parameters
- Machine tools and manufacturing systems
High precision, stable operation and high efficiency are all derived from stable, zero backlash and high rigidity mechanical system solutions, such as the application of products on feed, rotation and auxiliary axes
- Food and packaging machinery
A series of gearboxes specially designed for various shafts used in the field of packaging technology (including gearboxes with anti-corrosion design)-can maximize work efficiency, mechanical flexibility and cycle speed
- Textile machine
Features of CZPT Precision planetary gearbox
- Very high power density, torque increased by 40%
- Easy motor installation, optional installation with length compensation
- Flexible installation, the gearbox can be installed vertically, horizontally, and up or down together with the driven shaft
- Very high positioning accuracy, return clearance is less than arc minutes
- Through helical gear meshing, the operation is stable, and the running noise is less than 50dB-A
- The world’s leading life expectancy, and the raw materials and mechanism of the seal ring have been optimized
| Başvuru: | Motor, Machinery |
|---|---|
| Sertlik: | Sertleştirilmiş Diş Yüzeyi |
| Kurulum: | 90 Degree |
| Düzen: | Koaksiyel |
| Dişli Şekli: | Conical – Cylindrical Gear |
| Type: | Planet Dişli Redüktörü |
Impact of Gear Tooth Design and Profile on the Efficiency of Planetary Gearboxes
The design and profile of gear teeth have a significant impact on the efficiency of planetary gearboxes:
- Tooth Profile: The tooth profile, such as involute, cycloid, or modified profiles, affects the contact pattern and load distribution between gear teeth. An optimized profile minimizes stress concentration and ensures smooth meshing, contributing to higher efficiency.
- Tooth Shape: The shape of gear teeth influences the amount of sliding and rolling motion during meshing. Gear teeth designed for more rolling and less sliding motion reduce friction and wear, enhancing overall efficiency.
- Pressure Angle: The pressure angle at which gear teeth engage affects the force distribution and efficiency. Larger pressure angles can lead to higher efficiency due to improved load sharing, but they may require more space.
- Tooth Thickness and Width: Optimized tooth thickness and width contribute to distributing the load more evenly across the gear face. Proper sizing reduces stress and increases efficiency.
- Backlash: Backlash, the gap between meshing gear teeth, impacts efficiency by causing vibrations and energy losses. Properly controlled backlash minimizes these effects and improves efficiency.
- Tooth Surface Finish: Smoother tooth surfaces reduce friction and wear. Proper surface finish, achieved through grinding or honing, enhances efficiency by reducing energy losses due to friction.
- Material Selection: The choice of gear material influences wear, heat generation, and overall efficiency. Materials with good wear resistance and low friction coefficients contribute to higher efficiency.
- Profile Modification: Profile modifications, such as tip and root relief, optimize tooth contact and reduce interference. These modifications minimize friction and increase efficiency.
In summary, the design and profile of gear teeth play a crucial role in determining the efficiency of planetary gearboxes. Optimal tooth profiles, shapes, pressure angles, thicknesses, widths, surface finishes, and material selections all contribute to reducing friction, wear, and energy losses, resulting in improved overall efficiency.
Recent Advancements in Planetary Gearbox Technology
Advancements in planetary gearbox technology have led to improved performance, efficiency, and durability. Here are some notable developments:
High-Efficiency Gearing: Manufacturers are using advanced materials and precision manufacturing techniques to create gears with optimized tooth profiles. This reduces friction and enhances overall efficiency, resulting in higher power transmission with lower energy losses.
Enhanced Lubrication: Innovative lubrication systems and high-performance lubricants are being employed to ensure consistent and reliable lubrication even in extreme conditions. This helps to reduce wear and extend the lifespan of the gearbox.
Compact Designs: Engineers are focusing on designing more compact and lightweight planetary gearboxes without compromising their performance. This is particularly important for applications with limited space and weight constraints.
Integrated Sensors: Planetary gearboxes are now being equipped with sensors and monitoring systems that provide real-time data on temperature, vibration, and other operating parameters. This allows for predictive maintenance and early detection of potential issues.
Smart Gearboxes: Some modern planetary gearboxes are equipped with smart features such as remote monitoring, adaptive control, and data analysis. These features contribute to more efficient operation and better integration with automation systems.
Advanced Materials: The use of high-strength and wear-resistant materials, such as advanced alloys and composites, improves the durability and load-carrying capacity of planetary gearboxes. This is particularly beneficial for heavy-duty and high-torque applications.
Customization and Simulation: Advanced simulation and modeling tools enable engineers to design and optimize planetary gearboxes for specific applications. This customization helps achieve the desired performance and reliability levels.
Noise and Vibration Reduction: Innovations in gear design and manufacturing techniques have led to quieter and smoother-running planetary gearboxes, making them suitable for applications where noise and vibration are concerns.
Environmental Considerations: With growing environmental awareness, manufacturers are developing more eco-friendly lubricants and materials for planetary gearboxes, reducing their ecological footprint.
Overall, recent advancements in planetary gearbox technology are aimed at enhancing efficiency, durability, and versatility to meet the evolving demands of various industries and applications.
Advantages of Planetary Gearboxes Compared to Other Gearbox Configurations
Planetary gearboxes, also known as epicyclic gearboxes, offer several advantages compared to other gearbox configurations. These advantages make them well-suited for a wide range of applications. Here’s a closer look at why planetary gearboxes are favored:
- Compact Size: Planetary gearboxes are known for their compact and space-efficient design. The arrangement of multiple gears within a single housing allows for high gear reduction ratios without significantly increasing the size of the gearbox.
- High Torque Density: Due to their compact design, planetary gearboxes offer high torque density, meaning they can transmit a significant amount of torque relative to their size. This makes them ideal for applications where space is limited, but high torque is required.
- Efficiency: Planetary gearboxes can achieve high efficiency levels, especially when properly lubricated and well-designed. The arrangement of multiple meshing gears allows for load distribution, reducing individual gear tooth stresses and minimizing losses due to friction.
- Multiple Gear Stages: Planetary gearboxes can be designed with multiple stages, allowing for higher gear reduction ratios. This is particularly advantageous when precise control of output speed and torque is required.
- High Gear Ratios: Planetary gearboxes can achieve high gear reduction ratios in a single stage, eliminating the need for multiple external gears. This simplifies the overall design and reduces the number of components.
- Load Sharing: The multiple gear meshing arrangements in planetary gearboxes distribute loads evenly across multiple gears, reducing the stress on individual components and enhancing overall durability.
- High Precision: Planetary gearboxes offer high precision and accuracy in gear meshing, making them suitable for applications that demand precise motion control.
- Quiet Operation: The design of planetary gearboxes often leads to smoother and quieter operation compared to some other gearbox configurations, contributing to improved user experience.
Overall, the advantages of planetary gearboxes in terms of size, torque density, efficiency, versatility, and precision make them an attractive choice for a wide range of applications across industries, including robotics, automotive, aerospace, and industrial machinery.
editor by CX 2023-09-26
