Ürün Açıklaması
DC Planetary Gear Reducer for Automatic TV Rack
PG36M555 DC Planetary Gear Motor for Automatic TV rack
PG36M555 SERIES
Voltage: 3VDC 6VDC 9VDC 12VDC 24VDC
Speed range: 3
Gearbox please refer to gearbox data reduction ratio99.5 .Related to gearmotor output speed and torque please
refer to motor data.
2\ Motor can be installed wiht magnetic encorder. encorder parameters please refer to me-37.htm .
3\Standard output shaft after reducing: 8.0mm. other sizes of then output shaft can make as client request.
4\Chart only for reference,products shall prevail the entity.
Company Introduction
| Başvuru: | Industrial, Household Appliances, Car, Power Tools |
|---|---|
| Operating Speed: | Low Speed |
| Excitation Mode: | Excited |
| İşlev: | Control, Driving |
| Casing Protection: | Open Type |
| Number of Poles: | 8 |
| Örnekler: |
US$ 15/Piece
1 Adet (Min.Sipariş) | |
|---|
| Özelleştirme: |
Mevcut
| Özelleştirilmiş İstek |
|---|
Can gear reducers be customized for specific industrial needs and requirements?
Yes, gear reducers can be customized to meet specific industrial needs and requirements. Manufacturers offer customization options to ensure that gear reducers are tailored to the unique demands of various applications:
1. Gear Ratio Selection: Gear reducers can be designed with specific gear ratios to achieve the desired speed reduction or increase, catering to the specific requirements of the machinery or equipment.
2. Shaft Configurations: Gear reducers can be configured with different shaft sizes, lengths, and orientations to fit seamlessly into existing systems or accommodate specific mounting arrangements.
3. Torque Capacity: Customized gear reducers can be designed to handle higher or lower torque loads based on the application’s operational requirements.
4. Environmental Considerations: Gear reducers can be customized with special coatings, materials, or seals to withstand harsh environments, extreme temperatures, or corrosive conditions.
5. Noise and Vibration Reduction: Custom designs can incorporate features to reduce noise and dampen vibrations, enhancing the overall operation and user experience.
6. Mounting and Connection Options: Manufacturers can adapt gear reducer designs to include specific mounting interfaces or connection methods that align with the equipment’s design.
7. Lubrication and Maintenance: Customized gear reducers can include features for easy maintenance, such as accessible lubrication points or monitoring systems.
8. Integration with Controls: Gear reducers can be customized to integrate seamlessly with control systems, sensors, or automation processes, enhancing system efficiency and performance.
By collaborating with manufacturers and providing detailed specifications, industries can obtain tailor-made gear reducers that address their specific operational needs and contribute to the success of their applications.
What maintenance practices are essential for prolonging the lifespan of gear reducers?
Proper maintenance is crucial for extending the lifespan and ensuring optimal performance of gear reducers. Here are essential maintenance practices:
- 1. Lubrication: Regular lubrication of gear reducers is vital to reduce friction, wear, and heat generation. Use the recommended lubricant and follow the manufacturer’s guidelines for lubrication intervals.
- 2. Inspection: Routinely inspect gear reducers for signs of wear, damage, or leaks. Check for unusual noises, vibrations, or temperature increases during operation.
- 3. Alignment: Ensure proper alignment of the input and output shafts. Misalignment can lead to increased wear, noise, and reduced efficiency. Align the components according to the manufacturer’s specifications.
- 4. Cooling and Ventilation: Maintain proper cooling and ventilation to prevent overheating. Ensure that cooling fans and vents are clean and unobstructed.
- 5. Seal Maintenance: Inspect and replace seals as needed to prevent contaminants from entering the gear reducer. Contaminants can lead to accelerated wear and reduced performance.
- 6. Bolts and Fasteners: Regularly check and tighten bolts and fasteners to prevent loosening during operation, which can cause misalignment or component damage.
- 7. Replacing Worn Components: Replace worn or damaged components, such as gears, bearings, and seals, with genuine parts from the manufacturer.
- 8. Vibration Analysis: Conduct periodic vibration analysis to identify potential issues early. Excessive vibration can indicate misalignment or component wear.
- 9. Maintenance Records: Keep detailed maintenance records, including lubrication schedules, inspection dates, and component replacements. This helps track the history of the gear reducer and aids in future maintenance planning.
- 10. Training: Provide proper training to maintenance personnel on gear reducer maintenance and troubleshooting techniques.
By adhering to these maintenance practices, you can maximize the lifespan of your gear reducers, minimize downtime, and ensure reliable operation in your industrial processes.
Mekanik Sistemlerde Dişli Redüktörlerinin İşlevi
Dişli redüktörü, dişli redüktör ünitesi veya dişli kutusu olarak da bilinir, giriş milinin hızını azaltırken tork çıkışını artırmak için tasarlanmış mekanik bir cihazdır. Bunu, farklı boyutlarda birbirine geçen bir dizi dişli kullanarak gerçekleştirir.
Mekanik sistemlerde dişli redüktörünün temel işlevi şudur:
- Hız Azaltma: Dişli redüktörü, giriş milinin yüksek hızlı dönüşünü alır ve bir dizi dişli aracılığıyla çıkış miline iletir. Dişliler, çıkış dişlisinin giriş dişlisinden daha büyük bir çapa sahip olacak şekilde yapılandırılmıştır. Sonuç olarak, çıkış mili, giriş milinden daha düşük bir hızda, ancak daha yüksek torkla döner.
- Tork Artışı: Giriş ve çıkış dişlileri arasındaki boyut farkı nedeniyle, çıkış miline uygulanan tork, giriş miline uygulanan torktan daha fazladır. Bu tork artışı, sistemin daha ağır yükleri kaldırabilmesini ve daha yüksek kuvvet gerektiren görevleri yerine getirebilmesini sağlar.
Dişli redüktörler, tahrik edilen ekipmanın gereksinimlerini karşılamak için bir güç kaynağının hız ve tork özelliklerinin uyarlanmasının gerekli olduğu çeşitli endüstri ve uygulamalarda yaygın olarak kullanılır. Konveyör sistemleri, endüstriyel makineler, araçlar ve daha fazlası gibi makinelerde bulunabilirler.
editor by CX 2023-10-17
