Ürün Açıklaması
Ürün Açıklaması
Gear Reducer Cycloidal Gearbox Gear Motor Speed Reducer WRD-80E Fubao
HangZhou Fubao Electromechanical Technology Co., Ltd.WRD series gear reducer cycloidal gearbox gear motor speed reducer Installed with radial thrust ball bearings, so it can support external load, torque rigidity, large allowable torque, can reduce the number of components required, easy installation. The revolution speed of WRV gears is slower and vibration is reduced, which can reduce the motor structure (input gear) and inertia.
gear reducer cycloidal gearbox gear motor speed reducer High precision, high rigidity, high torque, high load and other characteristics realize hollow design at the same time. After being hollowed out, the ease of use of the product is improved due to the variety of piping and cable layout options.
The gear reducer cycloidal gearbox gear motor speed reducer is developed on the basis of the traditional needle wheel reducer. It not only overcomes the shortcomings of the general needle pendulum transmission, but also has more advantages, such as long life, stable precision, high efficiency, smooth transmission, small size, Light weight, large reduction ratio range, etc. This RV reducer from FUBAO adopts a double support support mechanism and a pinwheel mechanism, even if a torque up to 6 times the rated torque is applied, the product will not be damaged, and the torsional rigidity is very large. Small backlash, small volume, large torque. In order to directly support large loads, main bearings (large angular contact ball bearings) are installed inside.
gear reducer cycloidal gearbox gear motor speed reducer mainly has the following characteristics:
A. Main bearing built-in mechanism
1. Improved reliability;
2. Total cost reduction;
3. Radial thrust ball bearings are installed, so they can support external loads, and the moment rigidity and allowable moment are large, which can reduce the number of required components;
4. The use of couplings and motor flanges makes the installation of the motor very simple.
B. 2-stage deceleration mechanism
1. Small vibration;
2. The revolution speed of the gear is slowed down, the vibration is reduced, and the direct connection part of the motor (input gear) can be reduced, and the inertia can be reduced.
C. Double column support mechanism
1. High torsional rigidity;
2. Strong impact resistance;
3. The crank shaft is supported by double columns in the reducer.
D. Rolling contact mechanism
1. Excellent starting power;
2. Small abrasion and long service life;
3. Small backlash (1arc.min).
Ürün Parametreleri
| WRD-E series | Specifications | WRD20E | WRD20E | WRD40E | WRD80E | WRD110E | WRD160E | WRD320E | WRD450E |
| Nominal çıkış torku | 196 | 882 | 1666 | 2156 | 2156 | 3920 | 7056 | 8820 | |
| Reduction ratio | 31~103 | 57~161 | 57~153 | 57~153 | 81~161 | 81~171 | 81~185 | 81~171 | |
| Tepki | <=1 | ||||||||
| WRD-C series | Specifications | WRD-10C | WRD-27C | WRD-50C | WRD-100C | WRD-200C | WRD-320C |
| Nominal çıkış torku | 686 | 980 | 1764 | 2450 | 8820 | 2 0571 | |
| Reduction ratio | 81~243 | 100~233 | 109~240 | 101~258 | 106~245 | 115~253 | |
| Tepki | <=1 | ||||||
Ayrıntılı Fotoğraflar
Application Case
Şirket Profili
HangZhou Fubao Electromechanical Technology Co., Ltd. was established in 2008, the company has a complete precision reducer design, production capacity. Set R & D, manufacturing, assembly and sales, more in the field of gear manufacturing has more than 10 years of background, in the manufacturing equipment is equipped with Switzerland Riesenhahl gear grinding machine, domestic Qinchuan gear grinding machine, hamai gear hobbing machine and domestic Xihu (West Lake) Dis. gear hobbing machine, Japan Yasaki TLGmazak CNC lathe, CNC milling machine and other fully CNC equipment, In addition, it is equipped with other advanced measuring equipment such as Japanese TTI gear detector, 3 coordinate measurement, reducer backlash measurement instrument and so on. In a strong manufacturing capacity at the same time, can be stable, continuous manufacturing of high-quality precision reducer products.
The precision reducer produced by our company has the characteristics of high structural rigidity, small back backlash, precise transmission and so on. It is widely used in various industries. Companies adhering to the concept of let customers participate in manufacturing, and strive to provide customers with more personalized services. In the field of precision transmission has a unique achievements. It is our CHINAMFG pursuit to make far-reaching contributions.
Factory Display
SSS
Q: Speed reducer grease replacement time
A: When sealing appropriate amount of grease and running reducer, the standard replacement time is 20000 hours according to the aging condition of the grease. In addition, when the grease is stained or used in the surrounding temperature condition (above 40ºC), please check the aging and fouling of the grease, and specify the replacement time.
Q: Delivery time
A: Fubao has 2000+ production base, daily output of 1000+ units, standard models within 7 days of delivery.
Q: Reducer selection
A: Fubao provides professional product selection guidance, with higher product matching degree, higher cost performance and higher utilization rate.
Q: Application range of reducer
A: Fubao has a professional research and development team, complete category design, can match any stepping motor, servo motor, more accurate matching. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Başvuru: | Motor, Machinery, Agricultural Machinery, Robot Arm |
|---|---|
| Sertlik: | Sertleştirilmiş Diş Yüzeyi |
| Kurulum: | Dikey Tip |
| Özelleştirme: |
Mevcut
| Özelleştirilmiş İstek |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Kargo Ücreti:
Birim başına tahmini yük. |
nakliye maliyeti ve tahmini teslimat süresi hakkında. |
|---|
| Ödeme yöntemi: |
|
|---|---|
|
İlk Ödeme Tam Ödeme |
| Para birimi: | US$ |
|---|
| İade ve geri ödemeler: | Ürünleri teslim aldıktan sonra 30 gün içerisinde iade talebinde bulunabilirsiniz. |
|---|
Can gear reducers be customized for specific industrial needs and requirements?
Yes, gear reducers can be customized to meet specific industrial needs and requirements. Manufacturers offer customization options to ensure that gear reducers are tailored to the unique demands of various applications:
1. Gear Ratio Selection: Gear reducers can be designed with specific gear ratios to achieve the desired speed reduction or increase, catering to the specific requirements of the machinery or equipment.
2. Shaft Configurations: Gear reducers can be configured with different shaft sizes, lengths, and orientations to fit seamlessly into existing systems or accommodate specific mounting arrangements.
3. Torque Capacity: Customized gear reducers can be designed to handle higher or lower torque loads based on the application’s operational requirements.
4. Environmental Considerations: Gear reducers can be customized with special coatings, materials, or seals to withstand harsh environments, extreme temperatures, or corrosive conditions.
5. Noise and Vibration Reduction: Custom designs can incorporate features to reduce noise and dampen vibrations, enhancing the overall operation and user experience.
6. Mounting and Connection Options: Manufacturers can adapt gear reducer designs to include specific mounting interfaces or connection methods that align with the equipment’s design.
7. Lubrication and Maintenance: Customized gear reducers can include features for easy maintenance, such as accessible lubrication points or monitoring systems.
8. Integration with Controls: Gear reducers can be customized to integrate seamlessly with control systems, sensors, or automation processes, enhancing system efficiency and performance.
By collaborating with manufacturers and providing detailed specifications, industries can obtain tailor-made gear reducers that address their specific operational needs and contribute to the success of their applications.
Dişli oranları dişli redüktörlerinin performansının iyileştirilmesinde nasıl bir rol oynar?
Dişli oranları, giriş ve çıkış hızları ile torkları arasındaki ilişkiyi belirleyerek dişli redüktörlerinin performansının optimize edilmesinde önemli bir rol oynar. Dişli oranı, birbirine geçen iki dişli arasındaki diş sayısının oranıdır ve dişli redüktörünün mekanik avantajını ve verimliliğini doğrudan etkiler.
1. Hız ve Tork Dönüşümü: Dişli oranları, dişli redüktörlerinin belirli bir uygulamanın ihtiyaçlarına göre dönme hızını ve torku dönüştürmesini sağlar. Uygun dişli oranları seçildiğinde, dişli redüktörleri torku artırırken hızı düşürebilir (hız azaltma) veya torku azaltırken hızı artırabilir (hız artırma).
2. Mekanik Avantaj: Dişli redüktörleri, mekanik avantaj sağlamak için dişli oranlarından yararlanır. Hız düşürme konfigürasyonlarında, daha yüksek bir dişli oranı daha büyük bir mekanik avantaj sağlayarak çıkış milinin daha düşük hızda daha yüksek tork sağlamasına olanak tanır. Bu, ağır makine veya konveyör sistemleri gibi daha fazla kuvvet veya tork gerektiren uygulamalar için faydalıdır.
3. Verimlilik: Optimum dişli oranları, dişli redüktörlerinde daha yüksek verimliliğe katkıda bulunur. Uygun dişli oranlarına sahip dişli redüktörleri, yükü birden fazla dişli dişine dağıtarak, her bir dişli dişindeki stresi ve aşınmayı en aza indirir ve böylece genel verimliliği artırır ve kullanım ömrünü uzatır.
4. Hız Eşleştirme: Dişli oranları, dişli redüktörlerinin giriş ve çıkış millerinin dönüş hızlarına uyum sağlamasını sağlar. Bu, konveyörler, robotik ve üretim süreçleri gibi hassas hız senkronizasyonunun gerekli olduğu uygulamalarda kritik öneme sahiptir.
Bir redüktör için dişli oranları seçilirken, istenen hız, tork, verimlilik ve mekanik avantaj gibi uygulamanın özel gereksinimlerinin göz önünde bulundurulması önemlidir. Doğru seçilmiş dişli oranları, çok çeşitli endüstriyel ve mekanik sistemlerde redüktörlerin genel performansını ve güvenilirliğini artırır.
How do gear reducers contribute to speed reduction and torque increase?
Gear reducers play a crucial role in mechanical systems by achieving speed reduction and torque increase through the principle of gear ratios. Here’s how they work:
Gear reducers consist of multiple gears with different sizes, known as gear pairs. These gears are meshed together, and their teeth interlock to transmit motion and power. The gear ratio is determined by the ratio of the number of teeth on the input gear (driver) to the number of teeth on the output gear (driven).
Hız Azaltma: When a larger gear (output gear) is driven by a smaller gear (input gear), the output gear rotates at a slower speed than the input gear. This reduction in speed is proportional to the gear ratio. As a result, gear reducers are used to slow down the rotational speed of the output shaft compared to the input shaft.
Tork Artışı: The interlocking teeth of gears create a mechanical advantage that allows gear reducers to increase torque output. When the input gear applies a force (torque) to the teeth, it is transmitted to the output gear with greater force due to the leverage provided by the larger diameter of the output gear. The torque increase is inversely proportional to the gear ratio and is essential for applications requiring high torque at lower speeds.
By selecting appropriate gear ratios and arranging gear pairs, gear reducers can achieve various speed reduction and torque multiplication factors, making them essential components in machinery and equipment where precise control of speed and torque is necessary.
editor by CX 2024-03-03
