Tag Archives: oem gear

China OEM CZPT 715c3b Final Drive 34e7-02500 170402-00023 Travel Reduction Gear Box supplier

Product Description

Bonfiglioli Bonfiglioli speed reducer 715C3B 716C3B 717C3B 718 715C3BS-0571 TRAVEL REDUCTION GEAR BOX.CRAWLER EXCAVATOR Lohmann + Stolterfoht / CZPT GFT26 T2 1083

For CZPT Final Drive

For CZPT Travel Device

For CZPT Traveling Motor

For CZPT Traveling Reduction Gear

For CZPT Swing Device

For CZPT Swing Motor

For CZPT Swing Reduction Gear

For CZPT Main Pump & Pump Parts

For CZPT Axle & Transmission Parts

For CZPT Main Control Valve

For CZPT Joystick and Pedal Valve

For CZPT Center Joint

For CZPT Cylinder
CZPT winch reducer 716 718 717C3H10A131J9H-145U26

Two light-duty tandem vibratory rollers
Dual Drum Vibratory Roller

CZPT engine

Type	XD111		XD121	XD131
Working mass(kg)	11230		12300	13080
Mass distributed on front drum(kg)	5670		6210	6540
Mass distributed on rear drum(kg)	5560		6090	6540
Static linear load on front drum(N/cm)	292		286	301
Static linear load on rear drum(N/cm)	287		280	301
Speed range(km/h)	0-10		0-10	0-10
Theoretical gradeability(%)	30		30	30
Min. inner/outer turning radius(mm)	4000/5900		3870/6000	3870/6000
Crab-walking distance (mm)	200		200	200
Min. ground clearance(mm)	420		420	420
Wheel base (mm)	4000		4000	4000
Steering angle(±)	46		46	46
Swinging angle(±)	12		12	12
Vibrating frequency(HZ)	30-48		30-45	30-45
Nominal amplitude(mm)	0.41/0.8		0.41/0.8	0.4/0.72
Centrifugal force(kn)	66/133		70/140	82/150
Model and manufacturer	COMMINS 483.9
Rated rotating speed(t/min)	2200	2200		2200
Rated Power(KW)93	93	93		93
Rated oil wear (g. kw/h)229	229	229		229
Water tank capacity(L)	2*450	2*450		2*450
Fuel tank capacity(L)	200	220		220

Cheapest Price Hydraulic Single Drum Vibratory Compactor Xs142j in Philippines
CZPT Hydraulic Single-Drum Vibratory Rollers Capacity 14 Tons Xs142j in Indonesia
Compacting Price CZPT Single Drum Road Roller Xs142j
Brand New CZPT 14t Single Drum Vibratory Road Roller Xs142j
12 Ton Hydraulic Tandem Vibratory Roller Compactor Xd122
CZPT 12 Ton Double Drum Road Roller Price Clg6212e
CZPT 18 Ton Road Roller Xs182j
CZPT 14 Ton Vibratory Road Roller Compactor RS8140
2017 New Price CZPT Pneumatic Tire Road Roller Clg630r
14 Tons Double Drum Vibratory Roller Xd142
Hot Sale Road Compactor 10 Ton Tandem Vibratory Roller Xd102
3 Ton CZPT Popular Vibratory Mini Road Roller (Ltc203)
11 Ton Hydraulic Double Drum Road Roller Xd111e
12 Ton Hydraulic Double Drum Road Roller Xd121e
11300kg Double Drum Roller CZPT Xd111e
11 Tons Hydraulic Vibratory Double Drum Compactor Xd111e
CZPT Vibration Road Roller Capacity Clg614
Cheap Price Xihu (West Lake) Dis.n 16ton Road Roller Yz16-7 Sale
Xs202j 20 Ton Single Drum Vibratory Road Roller
11 Ton Vibratory Double Drum Road Roller Xd111e
Product Groups
Wheel Loader
Truck Crane
Excavator
Bulldozer
Motor Grader
Road Roller
Backhoe Loader
Heavy Truck
Crawler Crane
Tower crane
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application:	Motor
Function:	Distribution Power
Layout:	Three-Ring
Hardness:	Hardened Tooth Surface
Installation:	Torque Arm Type
Step:	Three-Step

Customization:	Available \| Customized Request

planetarygearbox

Planetary Gearbox

This article will explore the design and applications of a planetary gearbox. The reduction ratio of a planetary gearbox is dependent on the number of teeth in the gears. The ratios of planetary gearboxes are usually lower than those of conventional mechanical transmissions, which are mainly used to drive engines and generators. They are often the best choice for heavy-duty applications. The following are some of the advantages of planetary gearboxes.

planetary gearboxes

Planetary gearboxes work on a similar principle to solar systems. They rotate around a center gear called the sun gear, and two or more outer gears, called planet gears, are connected by a carrier. These gears then drive an output shaft. The arrangement of planet gears is similar to that of the Milky Way’s ring of planets. This arrangement produces the best torque density and stiffness for a gearbox.
As a compact alternative to normal pinion-and-gear reducers, planetary gearing offers many advantages. These characteristics make planetary gearing ideal for a variety of applications, including compactness and low weight. The efficiency of planetary gearing is enhanced by the fact that ninety percent of the input energy is transferred to the output. The gearboxes also have low noise and high torque density. Additionally, their design offers better load distribution, which contributes to a longer service life.
Planetary gears require lubrication. Because they have a smaller footprint than conventional gears, they dissipate heat well. In fact, lubrication can even lower vibration and noise. It’s also important to keep the gears properly lubricated to prevent the wear and tear that comes with use. The lubrication in planetary gears also helps keep them operating properly and reduces wear and tear on the gears.
A planetary gearbox uses multiple planetary parts to achieve the reduction goal. Each gear has an output shaft and a sun gear located in the center. The ring gear is fixed to the machine, while the sun gear is attached to a clamping system. The outer gears are connected to the carrier, and each planetary gear is held together by rings. This arrangement allows the planetary gear to be symmetrical with respect to the input shaft.
The gear ratio of a planetary gearbox is defined by the sun gear’s number of teeth. As the sun gear gets smaller, the ratio of the gear will increase. The ratio range of planetary gears ranges from 3:1 to ten to one. Eventually, however, the sun gear becomes too small, and the torque will fall significantly. The higher the ratio, the less torque the gears can transmit. So, planetary gears are often referred to as “planetary” gears.
planetarygearbox

Their design

The basic design of a Planetary Gearbox is quite simple. It consists of three interconnecting links, each of which has its own torque. The ring gear is fixed to the frame 0 at O, and the other two are fixed to each other at A and B. The ring gear, meanwhile, is attached to the planet arm 3 at O. All three parts are connected by joints. A free-body diagram is shown in Figure 9.
During the development process, the design team will divide the power to each individual planet into its respective power paths. This distribution will be based on the meshing condition of all gears in the system. Then, the design team will proceed to determine the loads on individual gear meshes. Using this method, it is possible to determine the loads on individual gear meshes and the shape of ring gear housing.
Planetary Gearboxes are made of three gear types. The sun gear is the center, which is connected to the other two gears by an internal tooth ring gear. The planet pinions are arranged in a carrier assembly that sets their spacing. The carrier also incorporates an output shaft. The three components in a Planetary Gearbox mesh with each other, and they rotate together as one. Depending on the application, they may rotate at different speeds or at different times.
The planetary gearbox’s design is unique. In a planetary gearbox, the input gear rotates around the central gear, while the outer gears are arranged around the sun gear. In addition, the ring gear holds the structure together. A carrier connects the outer gears to the output shaft. Ultimately, this gear system transmits high torque. This type of gearbox is ideal for high-speed operations.
The basic design of a Planetary Gearbox consists of multiple contacts that must mesh with each other. A single planet has an integer number of teeth, while the ring has a non-integer number. The teeth of the planets must mesh with each other, as well as the sun. The tooth counts, as well as the planet spacing, play a role in the design. A planetary gearbox must have an integer number of teeth to function properly.

Applications

In addition to the above-mentioned applications, planetary gearing is also used in machine tools, plastic machinery, derrick and dock cranes, and material handling equipments. Further, its application is found in dredging equipment, road-making machinery, sugar crystallizers, and mill drives. While its versatility and efficiency makes it a desirable choice for many industries, its complicated structure and construction make it a complex component.
Among the many benefits of using a planetary gearbox, the ability to transmit greater torque into a controlled space makes it a popular choice for many industries. Moreover, adding additional planet gears increases the torque density. This makes planetary gears suitable for applications requiring high torque. They are also used in electric screwdrivers and turbine engines. However, they are not used in everything. Some of the more common applications are discussed below:
One of the most important features of planetary gearboxes is their compact footprint. They are able to transmit torque while at the same time reducing noise and vibration. In addition to this, they are able to achieve a high speed without sacrificing high-quality performance. The compact footprint of these gears also allows them to be used in high-speed applications. In some cases, a planetary gearbox has sliding sections. Some of these sections are lubricated with oil, while others may require a synthetic gel. Despite these unique features, planetary gears have become common in many industries.
Planetary gears are composed of three components. The sun gear is the input gear, whereas the planet gears are the output gears. They are connected by a carrier. The carrier connects the input shaft with the output shaft. A planetary gearbox can be designed for various requirements, and the type you use will depend on the needs of your application. Its design and performance must meet your application’s needs.
The ratios of planetary gears vary depending on the number of planets. The smaller the sun gear, the greater the ratio. When planetary stages are used alone, the ratio range is 3:1 to 10:1. Higher ratios can be obtained by connecting several planetary stages together in the same ring gear. This method is known as a multi-stage gearbox. However, it can only be used in large gearboxes.
planetarygearbox

Maintenance

The main component of a planetary gearbox is the planetary gear. It requires regular maintenance and cleaning to remain in top shape. Demand for a longer life span protects all other components of the gearbox. This article will discuss the maintenance and cleaning procedures for planetary gears. After reading this article, you should know how to maintain your planetary gearbox properly. Hopefully, you can enjoy a longer life with your gearbox.
Firstly, it is important to know how to properly lubricate a planetary gearbox. The lubricant is essential as gears that operate at high speeds are subject to high levels of heat and friction. The housing of the planetary gearbox should be constructed to allow the heat to dissipate. The recommended oil is synthetic, and it should be filled between 30 and 50 percent. The lubricant should be changed at least every six months or as needed.
While it may seem unnecessary to replace a planetary gearbox, regular servicing will help it last a long time. A regular inspection will identify a problem and the appropriate repairs are needed. Once the planetary gearbox is full, it will plug with gear oil. To avoid this problem, consider getting the unit repaired instead of replacing the gearbox. This can save you a lot of money over a new planetary gearbox.
Proper lubrication is essential for a long life of your planetary gearbox. Oil change frequency should be based on oil temperature and operating speed. Oil at higher temperatures should be changed more frequently because it loses its molecular structure and cannot form a protective film. After this, oil filter maintenance should be performed every few months. Lastly, the gearbox oil needs to be checked regularly and replaced when necessary.

China OEM CZPT 715c3b Final Drive 34e7-02500 170402-00023 Travel Reduction Gear Box supplier
editor by Dream 2024-05-15

China OEM Bwd Series Planetary Gear Box Cycloid Drive Gear Reducer comer gearbox

Product Description

Starshine Drive Cycloid Geared Motor Characteristics

1. Features:
1. Smooth running,low noise gear tooth needle more engagement.
2. Cycloidal tooth profile provides a high contact ratio to withstand overload shocks
3. Compact size: single ratio available from 1/9 to 1/87, double stage up from 1/99 to 1/7569
4. Ideal for dynamic applications: frequent start-stop-reversing duties suits for cyclo speed reducer since inertia is low
5. Reduce maintenance costs: high reliability, long life, minimal maintenance compared to conventional gearboxes
6. Internal parts replaceable with other brands to ensure running.

7. Grease Lubricated & Oil Lubricated Models Available
8. Output Shaft Rotation Direction: Single Reduction: Clockwise Rotation; Double Reduction→ Counter Clockwise Rotation
9. Ambient Conditions: Indoor Installation:10-40 Celsius, Max 85% Humidity, Under 1000m Altitude, Well Ventilated Environment, Free of corrosive, explosive gases, vapors and dust
10.Slow Speed Shaft Direction: Horizontal, Vertical Up & Down, Universal Direction
11.Mounting Style: Foot Mount, Flange Mount & Vertical F-flange Mount,
12. Input Connection: Cyclo Integral Motor, Hollow Input Shaft Adapter
13. Coupling Method With Driven Machine: Coupling, Gears, Chain Sprocket Or Belt
14. Cycloid reducer Capacity Range: 0.37kW ~ 11kW;

2. Technical parameters

Type	Old Type	Output Torque	Output Shaft Dia.
SXJ00	JXJ00	98N.m	φ30
SXJ01	JXJ01	221N.m	φ35
SXJ02	JXJ02	448N.m	φ45
SXJ03	JXJ03	986N.m	φ55
SXJ04	JXJ04	1504N.m	φ70
SXJ05	JXJ05	3051N.m	φ90
SXJ06	JXJ06	5608N.m	φ100

About Us

ZheJiang CHINAMFG Drive Co.,Ltd,the predecessor was a state-owned military mould enterprise, was established in 1965. CHINAMFG specializes in the complete power transmission solution for high-end equipment manufacturing industries based on the aim of “Platform Product, Application Design and Professional Service”.
CHINAMFG have a strong technical force with over 350 employees at present, including over 30 engineering technicians, 30 quality inspectors, covering an area of 80000 square CHINAMFG and kinds of advanced processing machines and testing equipments. We have a good foundation for the industry application development and service of high-end speed reducers & variators owning to the provincial engineering technology research center,the lab of gear speed reducers, and the base of modern R&D.

Our Team

Quality Control
Quality:Insist on Improvement,Strive for Excellence With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of our products,on the contrary,wcreate the value of quality.
Quality policy:to enhance the overall level in the field of power transmission
Quality View:Continuous Improvement , pursuit of excellence
Quality Philosophy:Quality creates value

3. Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection; responsible for tracking bad, to monitor the supplier to take corrective
measures to prevent recurrence.

4. Process Quality Control
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend;
found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state.

5. FQC(Final QC)
After the manufacturing department will complete the product, stand in the customer’s position on the finished product quality verification, in order to ensure the quality of
customer expectations and needs.

6. OQC(Outgoing QC)
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the
product is a product inspection to determine the qualified products.

7. Certification.

Packing

Delivery

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application:	Motor, Machinery, Marine, Agricultural Machinery
Function:	Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction
Layout:	Cycloidal
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Step:	Single-Step

Customization:	Available \| Customized Request

gear gearbox

Are there any disadvantages or limitations to using gear reducer systems?

While gear reducer systems offer numerous advantages, they also come with certain disadvantages and limitations that should be considered during the selection and implementation process:

1. Size and Weight: Gear reducers can be bulky and heavy, especially for applications requiring high gear ratios. This can impact the overall size and weight of the machinery or equipment, which may be a concern in space-constrained environments.

2. Efficiency Loss: Despite their high efficiency, gear reducers can experience energy losses due to friction between gear teeth and other components. This can lead to a reduction in overall system efficiency, particularly in cases where multiple gear stages are used.

3. Cost: The design, manufacturing, and assembly of gear reducers can involve complex processes and precision machining, which can contribute to higher initial costs compared to other power transmission solutions.

4. Maintenance: Gear reducer systems require regular maintenance, including lubrication, inspection, and potential gear replacement over time. Maintenance activities can lead to downtime and associated costs in industrial settings.

5. Noise and Vibration: Gear reducers can generate noise and vibrations, especially at high speeds or when operating under heavy loads. Additional measures may be needed to mitigate noise and vibration issues.

6. Limited Gear Ratios: While gear reducers offer a wide range of gear ratios, there may be limitations in achieving extremely high or low ratios in certain designs.

7. Temperature Sensitivity: Extreme temperatures can affect the performance of gear reducer systems, particularly if inadequate lubrication or cooling is provided.

8. Shock Loads: While gear reducers are designed to handle shock loads to some extent, severe shock loads or abrupt changes in torque can still lead to potential damage or premature wear.

Despite these limitations, gear reducer systems remain widely used and versatile components in various industries, and their disadvantages can often be mitigated through proper design, selection, and maintenance practices.

gear gearbox

What role do gear ratios play in optimizing the performance of gear reducers?

Gear ratios play a crucial role in optimizing the performance of gear reducers by determining the relationship between input and output speeds and torques. A gear ratio is the ratio of the number of teeth between two meshing gears, and it directly influences the mechanical advantage and efficiency of the gear reducer.

1. Speed and Torque Conversion: Gear ratios allow gear reducers to convert rotational speed and torque according to the needs of a specific application. By selecting appropriate gear ratios, gear reducers can either reduce speed while increasing torque (speed reduction) or increase speed while decreasing torque (speed increase).

2. Mechanical Advantage: Gear reducers leverage gear ratios to provide mechanical advantage. In speed reduction configurations, a higher gear ratio results in a greater mechanical advantage, allowing the output shaft to deliver higher torque at a lower speed. This is beneficial for applications requiring increased force or torque, such as heavy machinery or conveyor systems.

3. Efficiency: Optimal gear ratios contribute to higher efficiency in gear reducers. By distributing the load across multiple gear teeth, gear reducers with suitable gear ratios minimize stress and wear on individual gear teeth, leading to improved overall efficiency and prolonged lifespan.

4. Speed Matching: Gear ratios enable gear reducers to match the rotational speeds of input and output shafts. This is crucial in applications where precise speed synchronization is required, such as in conveyors, robotics, and manufacturing processes.

When selecting gear ratios for a gear reducer, it’s important to consider the specific requirements of the application, including desired speed, torque, efficiency, and mechanical advantage. Properly chosen gear ratios enhance the overall performance and reliability of gear reducers in a wide range of industrial and mechanical systems.

gear gearbox

Function of Gear Reducers in Mechanical Systems

A gear reducer, also known as a gear reduction unit or gearbox, is a mechanical device designed to reduce the speed of an input shaft while increasing its torque output. It accomplishes this through the use of a set of interlocking gears with different sizes.

The primary function of a gear reducer in mechanical systems is to:

Speed Reduction: The gear reducer takes the high-speed rotation of the input shaft and transmits it to the output shaft through a set of gears. The gears are configured in such a way that the output gear has a larger diameter than the input gear. As a result, the output shaft rotates at a lower speed than the input shaft, but with increased torque.
Torque Increase: Due to the size difference between the input and output gears, the torque applied to the output shaft is greater than that of the input shaft. This torque multiplication allows the system to handle heavier loads and perform tasks requiring higher force.

Gear reducers are widely used in various industries and applications where it’s necessary to adapt the speed and torque characteristics of a power source to meet the requirements of the driven equipment. They can be found in machinery such as conveyor systems, industrial machinery, vehicles, and more.

China OEM Bwd Series Planetary Gear Box Cycloid Drive Gear Reducer comer gearbox
editor by CX 2024-05-08

China OEM Hot Rolling Mill Planetary Gear Box planetary gearbox application

Product Description

1.Highly Standard Modular Designed:

The products are easily connected with and driven by different types of motors or other kinds of input

power. The same type geared motor can be adapted to optioned powers of motors.It is therefore easy

to realize different solutions for varied requirements.

2.Ratio:

Featured many closely divided ratios and wide range of them.Very big final rations can be obtained

through combined unites to reach extremely low output speeds.

3.Mounting Arrangement:No strict limitation to the mounting arrangement.

4.High Strength,Compact Dimension:

Housings are made of high strength cast iron.Gears and shaft gears are finished with gas carburising

process and precise grouding to sequeritially get high loading capacity of percertain volume.

5. Long Service Life:

Under the condition of accurately selecting type size and the normal maintenanceand use, main

components (expect those easily-disabled parts) can last as long as up to more than 25,000

hours. Easily-disabled parts include lubricating oil, oil seals, and bearings.

6. Low Noise:

All key components are finished by precisely machining, accurate assembly, and finally tested,

and therefore, fairly low noise is reached.

Type	X
Power	0.25-36kw
Output Speed	0.64-350rpm
Output Torque	top to 15710Nm
Ratio	25~4000
Weight	240-18900KGS
Standard voltage and frequency	380V&50HZ
Production time	25-30DAYS

Q: Are you trading company or manufacturer?
A: We are factory.

Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock.

Q: Can we buy 1 pc of each item for quality testing?
A: Yes, we are glad to accept trial order for quality testing.

Q:How to choose a gearbox which meets your requirement?
A:You can refer to our catalogue to choose the gearbox or we can help to choose when you provide
the technical information of required output torque, output speed and motor parameter etc.

Q: What information shall we give before placing a purchase order?
A:a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor informationetc.
b) Housing color.
c) Purchase quantity.
d) Other special requirements.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application:	Motor, Machinery, Marine, Agricultural Machinery
Hardness:	Hardened Tooth Surface
Installation:	Vertical Type
Layout:	Coaxial
Step:	Three-Step
Type:	Gear Reducer

Samples:	US$ 50/Piece 1 Piece(Min.Order) \| Request Sample

planetarygearbox

Types, Applications, and Lubrication of Planetary Gearboxes

A Planetary Gearbox is a device that can be used in a variety of applications. Their reduction ratios depend on the number of teeth in each gear. In this article, we will discuss the types, applications, and lubrication of planetary gearboxes. Hopefully, this article will be of help to you. If not, you can check out this article and discover more about this fascinating machine. There are many different types of planetary gearboxes.

Applications of planetary gearboxes

The planetary gearbox is a popular option for applications requiring precise positioning. Applications of the planetary gearbox range from plastic machinery to agricultural equipment, from goods & personnel lifts to industrial robotics. Some of the industries that benefit from this type of gearbox include robotics, intra-logistics, robotics for industrial automation, and medical equipment. Increasing automation is also fueling the growth of the industrial planetary gearbox market in APAC.
The compact design of planetary gears makes them excellent for reducing load inertia and maximizing torque. However, some applications require additional lubrication for sustained performance or high speeds. CZPT uses CZPT in its planetary gearboxes. In addition, lubrication prevents gear wear and minimizes noise and vibration. The planetary gearbox is also easy to install, thanks to its low-mass-inertia design.
Another application of the planetary gearbox is in axles and transfer cases. The planetary gear architecture consists of a sun gear, also called the central gear, and a ring-gear with internal teeth that are concentric to the sun gear. The two gears are connected via a carrier, and the output shaft is positioned on the ring-gear carrier. The gearbox can be configured in a variety of ways, depending on the speed-ratio requirements.
The planetary gear train is similar to that of a solar system. It comprises a sun gear and two or more outer gears, ring gear and carrier assembly. In this configuration, the outer gears are connected via a carrier and a ring gear. The planet gears are in constant mesh with each other, and power applied to one of these members will rotate the whole assembly. They are a very efficient choice for many applications.

Types

There are three types of planetary gearboxes, depending on their performance and efficiency. The basic model is highly efficient and transmits up to 97% of power input. Depending on the speed and torque that need to be transmitted, planetary gearboxes are used in many different applications. A planetary gearbox can reduce the speed of a roller or produce a more precise level of movement. Using a planetary gearbox for your printing press, for example, will maximize your gear transmission ratio.
This market research report analyzes the factors influencing the market for Planetary Gearboxes, as well as their sales and revenues. It also highlights industry trends and details the competitive landscape. It also provides a comprehensive analysis of the Planetary Gearbox industry and its drivers and restraints. It provides detailed information on the market size and future growth prospects. The study also includes an extensive discussion of the competitive landscape, identifying the top companies and key market players.
A planetary gearbox is often used to manufacture complicated machines. These gears are usually made of high-quality steel, which makes them extremely durable. Planetary gearboxes can also be used in the production of heavy machine elements. There are many benefits of a planetary gearbox, including its compactness and low mass inertia. The main advantage of a planetary gearbox is its ability to distribute torque. Compared to a normal gearbox, planetary gearboxes can provide torque that is nearly three times higher than its conventional counterpart.
The three main types of planetary gears are the single-stage, compound, and multi-stage. The general concept of a planetary gear is referred to as a compound planetary gear. This means that planetary gears are made up of one of these three basic structures: a meshed-planet structure, a shaft, and a multi-stage structure. This type of gear has multiple stages and is particularly useful for fast-dynamic laser cutting machines.
planetarygearbox

Design

A planetary gearbox is similar to a car’s transmission. All of its gears must have a certain number of teeth and be spaced equally apart. The teeth of a planet must mesh with the gears of the ring and sun to be functional. The number of teeth needed will depend on the number of planets and their spacing. This equation is a good starting point for designing a gearbox.
The dynamic properties of planetary gears are investigated using a parametric model. The stiffness of the mesh changes as the number of gear tooth pairs in contact varies during the gear rotation. Small disturbances in design realizations cause nonlinear dynamics, which results in noise and vibrations in the gear transmission. A mathematical system describing this process is developed using the basic principles of analytical mechanics. This mathematical model can be used to optimize any planetary gear.
This analysis assumes that the sun gear and planet gears have the same design modulus, which is a fundamental requirement of any mechanical gear. In reality, the ratio of these two gears is 24/16 versus -3/2. This means that a planetary gearbox’s output torque is 41.1 times the input torque. Considering this factor, we can make an accurate estimate of the total torque. The planetary gears are mounted face-to-face and connected to an electric motor.
A planetary gear set has to have a certain number of teeth that are odd or even. One way to overcome this issue is to double the number of teeth on the sun gear and the annulus gear. This will also solve irregularities. Another way to design a planetary gear set is to use the appropriate diametral pitch and module. There are many planetary gear sets available on the market, so it pays to understand the differences.

Lubrication

Lubrication for Planetary Gearboxes is important for the smooth functioning of the gear. Planetary gears are subjected to high levels of friction and heat, so they require regular lubrication. The gear housing is designed to dissipate heat away from the gear, but heat can still enter the gear, which can result in a poor lubrication condition. The best lubrication solution is synthetic oil, and the gear should be refilled with a minimum of 30 percent oil.
When lubricating a planetary gearbox, it is important to note that hydraulic oil is not suitable for planetary gearboxes, which cost over $1500. Hydraulic oil does not have the same viscosity and behavior with temperature fluctuations, making it less effective. The planetary gearbox may also overheat if a hose is not provided for case draining. A case drain hose is essential to prevent this from happening, because hot oil can cause overheating of the gearbox and damage to the gears.
Oil delivery conduits are positioned between each pair of planet gears. Each oil delivery conduit directs fresh oil toward the sun gear and the planet gear. The oil then disperses and exits from the gear train with considerable tangential velocity. The oil is redirected into a collection channel (56). The preferred embodiment uses herringbone gears, which pump oil axially outward into the channels.
The best way to choose the right type of lubrication is to consider its viscosity. Too high a viscosity will prevent the lubricant from flowing properly, which will cause metal-to-metal contact. The oil must also be compatible with the gearbox temperature. A suitable viscosity will increase the efficiency of the gearbox and prevent downtime. A reliable gearbox will ultimately result in higher profits and fewer costs.
planetarygearbox

Applications

This report examines the Industrial Planetary Gearbox Market and its current trends. It identifies the pre and post-COVID-19 effects of the industry. It outlines the advantages and disadvantages of the industrial planetary gearbox market. The report also explains the diverse financing resources and business models of the market. It includes the key players in the industry. Hence, it is essential to read this report carefully.
The report includes analysis and forecasts of the global market for planetary gearbox. It includes the product introductions, key business factors, regional and type segments, and end-users. It covers the sales and revenue of the market for each application field. The report also includes the regional and country-level market data. It also focuses on the market share of the key companies operating in the industry. It covers the competitive scenario in the global planetary gearbox market.
Another popular application for planetary gearboxes is in the toy industry. It is possible to design toys that look stunning with planetary gear systems. In addition to toys, clock makers also benefit from the planetary arrangement. In addition to producing a good-looking clock, this gearbox can reduce inertia and improve its efficiency. The planetary gearbox is easy to maintain, which makes it a good choice for clock applications.
In addition to traditional gear reductions, planetary gears are also used for 3D printing. Their huge gear ratio makes 3D printing easier. Furthermore, planetary gears are used to drive stepper motors, which turn much faster and produce a desired output. There are numerous industrial uses for planetary gearboxes. This article has explored a few of the most common ones. And don’t forget to explore their uses.

China OEM Hot Rolling Mill Planetary Gear Box planetary gearbox application
editor by Dream 2024-05-07

China OEM AC Motor 1: 50 Ratio 90 Degree Small Hypoid Gear Velocity Reducer gearbox definition

Product Description

AC Motor 1:50 Ratio 90 Degree Small Hypoid Gear Velocity Reducer

1.KM series Helical-hypoid Gearbox’s Characteristics
KM series helical-hypoid gearbox is a new-generation of product developed by Aokman. With a compromise of advanced technology both at home and abroad, its main features are as follows:
(1) Driven by hypoid gears, which has big ratios.
(2) Large output torque, high efficiency, energy saving and environmental protection.
(3) High-quality aluminum alloy housing, and light in weight and non-rusting.
(4) Smooth in running and low in noise, and can work long time in dreadful conditions.
(5) Good-looking in appearance, durable in service life and small in volume.
(6) Suitable for all round installation, wide application and easy use.
(7) The mounting dimension of KM series helical-hypoid gearbox are compatible with RV series worm gearbox.
(8) Modular and multi-structure can meet the demands of various conditions.

Detailed Photos

2. KM series Helical-hypoid Gearbox’s Main Materials
(1) Housing: die-cast aluminum alloy (frame size 27 to 57)
(2) Gear wheel: 20CrMnTiH1 carbonizing & quenching heat treatment make the hardness of gears surface be up to 56-62 HRC, and be retained carburization layers thickness between 0.3 and 0.5mm after precise grinding.
3. KM series Helical-hypoid Gearbox’s Surface Painting
Aluminum alloy housing:
(1) Shot blasting and special antiseptic treatment on the aluminum alloy surface.
(2) After phosphating, spray the RAL9571 silver white paint.4.Gearbox Parameters

Product Parameters

Models	Stage	Nominal Ratio	Output Speed (n2)*	Max. Torque	Input Shaft Dia.	Output Hole Dia.	Output Shaft Dia.
KM050	3 Stage	50~300	4.8~27	130N.m	Φ11	Φ20, Φ24	Φ25
KM050	2 Stage	7.5~60	24~181	130N.m	Φ11	Φ20, Φ24	Φ25
KM063	3 Stage	50~300	4.6~27	200N.m	Φ11	Φ25, Φ28	Φ25
KM063	2 Stage	7.5~60	23~184	200N.m	Φ14	Φ25, Φ28	Φ25
KM075	3 Stage	50~300	4.7~28	350N.m	Φ14	Φ28, Φ30, Φ35	Φ28
KM075	2 Stage	7.5~60	24~187	350N.m	Φ16	Φ28, Φ30, Φ35	Φ28
KM090	3 Stage	50~300	4.7~28	500N.m	Φ14	Φ35, Φ38	Φ35
KM090	2 Stage	7.5~60	24~187	500N.m	Φ19	Φ35, Φ38	Φ35
KM110	3 Stage	50~300	4.7~27	750N.m	Φ19	Φ40, Φ42	Φ42
KM110	2 Stage	7.5~60	24~187	750N.m	Φ24	Φ40, Φ42	Φ42

Packaging & Shipping

Company Profile

Our Advantages

After Sales Service

Pre-sale services	1. Select equipment model.
	2.Design and manufacture products according to clients’ special requirement.
	3.Train technical personal for clients
Services during selling	1.Pre-check and accept products ahead of delivery.
Services during selling	2. Help clients to draft solving plans.
After-sale services	1.Assist clients to prepare for the first construction scheme.
	2. Train the first-line operators.
	3.Take initiative to eliminate the trouble rapidly.
	4. Provide technical exchanging.

FAQ

1.Q:What kinds of gearbox can you produce for us?

A:Main products of our company: UDL series speed variator,RV series worm gear reducer, ATA series shaft mounted gearbox, X,B series gear reducer,
P series planetary gearbox and R, S, K, and F series helical-tooth reducer, more
than 1 hundred models and thousands of specifications
2.Q:Can you make as per custom drawing?
A: Yes, we offer customized service for customers.
3.Q:What is your terms of payment ?
A: 30% Advance payment by T/T after signing the contract.70% before delivery
4.Q:What is your MOQ?
A: 1 Set

If you have any demand for our products please feel free to contact me. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application:	Motor, Machinery
Function:	Speed Changing, Speed Reduction
Layout:	Orthogonal
Hardness:	Hardened Tooth Surface
Installation:	Industry
Step:	Double or Three-Step

Customization:	Available \| Customized Request

gear gearbox

How do gear reducers enhance the efficiency of conveyor systems and robotics?

Gear reducers play a significant role in improving the efficiency of both conveyor systems and robotics by optimizing speed, torque, and control. Here’s how they contribute:

Conveyor Systems:

In conveyor systems, gear reducers enhance efficiency in the following ways:

Speed Control: Gear reducers allow precise control over the rotational speed of conveyor belts, ensuring that materials are transported at the desired speed for efficient production processes.
Torque Adjustment: By adjusting gear ratios, gear reducers provide the necessary torque to handle varying loads and prevent overloading, minimizing energy wastage.
Reverse Operation: Gear reducers enable smooth bidirectional movement of conveyor belts, facilitating tasks such as loading, unloading, and distribution without the need for additional components.
Synchronization: Gear reducers ensure synchronized movement of multiple conveyor belts in complex systems, optimizing material flow and minimizing jams or bottlenecks.

Robotics:

In robotics, gear reducers enhance efficiency through the following means:

Precision Movement: Gear reducers provide precise control over the movement of robot joints and arms, enabling accurate positioning and manipulation of objects.
Reduced Inertia: Gear reducers help reduce the inertia experienced by robotic components, allowing for quicker and more responsive movements while conserving energy.
Compact Design: Gear reducers offer a compact and lightweight solution for achieving various motion profiles in robotic systems, allowing for efficient use of space and resources.
Torque Amplification: By amplifying torque from the motor, gear reducers enable robots to handle heavier loads and perform tasks that require greater force, enhancing their overall capabilities.

By providing precise speed control, torque adjustment, and reliable motion transmission, gear reducers optimize the performance of conveyor systems and robotics, leading to improved efficiency, reduced energy consumption, and enhanced operational capabilities.

gear gearbox

Can gear reducers be used for both speed reduction and speed increase?

Yes, gear reducers can be utilized for both speed reduction and speed increase, depending on their design and arrangement. The functionality to either decrease or increase rotational speed is achieved by altering the arrangement of gears within the gearbox.

1. Speed Reduction: In speed reduction applications, a gear reducer is designed with gears of different sizes. The input shaft connects to a larger gear, while the output shaft is connected to a smaller gear. As the input shaft rotates, the larger gear turns the smaller gear, resulting in a decrease in output speed compared to the input speed. This configuration provides higher torque output at a lower speed, making it suitable for applications that require increased force or torque.

2. Speed Increase: For speed increase, the gear arrangement is reversed. The input shaft connects to a smaller gear, while the output shaft is connected to a larger gear. As the input shaft rotates, the smaller gear drives the larger gear, resulting in an increase in output speed compared to the input speed. However, the torque output is lower than that of speed reduction configurations.

By choosing the appropriate gear ratios and arrangement, gear reducers can be customized to meet specific speed and torque requirements for various industrial applications. It’s important to select the right type of gear reducer and configure it correctly to achieve the desired speed reduction or speed increase.

gear gearbox

Are there variations in gear reducer designs for specific tasks and applications?

Yes, gear reducer designs vary widely to suit specific tasks and applications across various industries. Manufacturers offer a range of gear reducer types and configurations to accommodate different requirements, including:

Helical Gear Reducers: These are versatile and provide smooth and efficient torque transmission. They are commonly used in applications requiring high precision and moderate speed reduction, such as conveyors, mixers, and agitators.
Bevel Gear Reducers: These are ideal for transmitting power between intersecting shafts. They are often used in heavy machinery, printing presses, and automotive applications.
Worm Gear Reducers: These provide compact solutions and are suitable for applications with higher speed reduction requirements, such as conveyor systems, winches, and elevators.
Planetary Gear Reducers: These offer high torque density and are used in applications demanding precise control, such as robotics, aerospace, and heavy-duty machinery.
Parallel Shaft Gear Reducers: Commonly used in industrial machinery, these reducers are designed for high torque and reliability.
Right-Angle Gear Reducers: These are used when space limitations require a change in shaft direction, commonly found in packaging equipment and conveyors.

Each type of gear reducer has unique features and benefits that make it suitable for specific tasks. Manufacturers often provide customization options to tailor gear reducers to the precise requirements of an application, including gear ratios, mounting options, and input/output configurations.

Therefore, the variation in gear reducer designs allows industries to select the most appropriate type based on factors such as torque, speed, space constraints, precision, and environmental conditions.

China OEM AC Motor 1: 50 Ratio 90 Degree Small Hypoid Gear Velocity Reducer gearbox definition
editor by CX 2024-04-26

China OEM R Helical Coaxial AC 220V Motor Reducer/ Inliner Gear Speed Reducer synchromesh gearbox

Product Description

R helical Coaxial AC 220V Motor Reducer/ inliner gear speed reducer

Product Description

1. Compact structure and simple assembly;
2. Wide speed ranges and high torque;
3. Low noise, good sealing performance, high efficiency;
4. Stable and safe, long lifetime, universal;
5. Multi-structure, various assembling methods

Detailed Photos

Application:	Industrial
Speed:	Constant Speed
Number of Stator:	Single or Three Phase

Samples:	US$ 300/Piece 1 Piece(Min.Order) \| Order Sample

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

How do gear reducers contribute to energy efficiency in machinery and equipment?

Gear reducers play a significant role in enhancing energy efficiency in various machinery and equipment. Here’s how they contribute:

1. Speed Reduction: Gear reducers are commonly used to reduce the speed of the input shaft, allowing the motor to operate at a higher speed where it’s most efficient. This speed reduction helps match the motor’s optimal operating range, reducing energy consumption.

2. Torque Increase: Gear reducers can increase torque output while decreasing speed, enabling machinery to handle higher loads without the need for a larger, more energy-intensive motor.

3. Matching Load Requirements: By adjusting gear ratios, gear reducers ensure that the machinery’s output speed and torque match the load requirements. This prevents the motor from operating at unnecessary high speeds, saving energy.

4. Variable Speed Applications: In applications requiring variable speeds, gear reducers allow for efficient speed control without the need for continuous motor adjustments, improving energy usage.

5. Efficient Power Transmission: Gear reducers efficiently transmit power from the motor to the load, minimizing energy losses due to friction and inefficiencies.

6. Motor Downsizing: Gear reducers enable the use of smaller, more energy-efficient motors by converting their higher speed, lower torque output into the lower speed, higher torque needed for the application.

7. Decoupling Motor and Load Speeds: In cases where the motor and load speeds are inherently different, gear reducers ensure the motor operates at its most efficient speed while still delivering the required output to the load.

8. Overcoming Inertia: Gear reducers help overcome the inertia of heavy loads, making it easier for motors to start and stop, reducing energy consumption during frequent operation.

9. Precise Control: Gear reducers provide precise control over speed and torque, optimizing the energy consumption of machinery in processes that require accurate adjustments.

10. Regenerative Braking: In some applications, gear reducers can be used to capture and convert kinetic energy back into electrical energy during braking or deceleration, improving overall energy efficiency.

By efficiently managing speed, torque, and power transmission, gear reducers contribute to energy-efficient operation, reducing energy consumption, and minimizing the environmental impact of machinery and equipment.

gear gearbox

What factors should be considered when selecting the right gear reducer?

Choosing the appropriate gear reducer involves considering several crucial factors to ensure optimal performance and efficiency for your specific application:

1. Torque and Power Requirements: Determine the amount of torque and power your machinery needs for its operation.
2. Speed Ratio: Calculate the required speed reduction or increase to match the input and output speeds.
3. Gear Type: Select the appropriate gear type (helical, bevel, worm, planetary, etc.) based on your application’s torque, precision, and efficiency requirements.
4. Mounting Options: Consider the available space and the mounting configuration that suits your machinery.
5. Environmental Conditions: Evaluate factors such as temperature, humidity, dust, and corrosive elements that may impact the gear reducer’s performance.
6. Efficiency: Assess the gear reducer’s efficiency to minimize power losses and improve overall system performance.
7. Backlash: Consider the acceptable level of backlash or play between gear teeth, which can affect precision.
8. Maintenance Requirements: Determine the maintenance intervals and procedures necessary for reliable operation.
9. Noise and Vibration: Evaluate noise and vibration levels to ensure they meet your machinery’s requirements.
10. Cost: Compare the initial cost and long-term value of different gear reducer options.

By carefully assessing these factors and consulting with gear reducer manufacturers, engineers and industry professionals can make informed decisions to select the right gear reducer for their specific application, optimizing performance, longevity, and cost-effectiveness.

gear gearbox

Function of Gear Reducers in Mechanical Systems

The primary function of a gear reducer in mechanical systems is to:

Speed Reduction: The gear reducer takes the high-speed rotation of the input shaft and transmits it to the output shaft through a set of gears. The gears are configured in such a way that the output gear has a larger diameter than the input gear. As a result, the output shaft rotates at a lower speed than the input shaft, but with increased torque.
Torque Increase: Due to the size difference between the input and output gears, the torque applied to the output shaft is greater than that of the input shaft. This torque multiplication allows the system to handle heavier loads and perform tasks requiring higher force.

China OEM R Helical Coaxial AC 220V Motor Reducer/ Inliner Gear Speed Reducer synchromesh gearbox
editor by CX 2024-04-25

China OEM Low Price Vertical Slewing Gear Drive Reducer with Hydraulic Motor with Best Sales

Product Description

Low Price Vertical Slewing Gear Drive Reducer with Hydraulic Motor

Product Description

CHUANGXIHU (WEST LAKE) DIS. planetary reducer gearbox is designed with large torque, high start and transmission efficiency, low-speed stability, compact radial size, low noise, etc. The main devices we are making are walking reducers, lifting reducers and swing reducers. They are widely used for vehicle cranes, crawler cranes, truck mounted cranes, marine cranes, aerial work trucks, excavators, etc.

Product Name	Slewing Drive Planetary Gearbox Reducer
Output Torque	800~100000N.m or customzed
Input Speed	600~2000rpm or customized
Output Speed	1.5~1200rpm or customized
Gearing Arrangement	Planetary
Customized support	OEM, ODM
Package	Professional Ship Pack Wooden Case or do according customer’s request
Main Features	1) Compact size 2) Low noise 3) High transmission efficiency 4) Good working condition under lower speed 5) Customized hydraulic motors and brakes for different request 6) One Year Warranty from reception 7) Free components for replacement within warranty period 8) Professional and tailored solution for different requirements 9) Free technical support at any time 10) Customer training is available.
Applicable Industries	Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Construction works , Energy & Mining,crane ,etc

Product Application

Slewing Drive Reducer Application: Widely used in construction, water conservancy engineering, forestry, mining, wharf, etc. material lifting, also can be used as a modern electronic control automatic operation line supporting

Main Products

Hydraulic Winch Hydraulic Hoist Winch Slewing Drive Reducer

Final Drive Reducer Electric Winch Hydraulic Motor

Our Company

Taian Chuangdong New Material Technology Co., Ltd. is 1 professinal factory has successively developed a series of planetary transmission mechanisms in the fields of lifting machinery, exploration machinery, obstacle clearance machinery, aerial work vehicle machinery , marine machinery, petroleum machinery, and truck mounted cranes. At present, our company main products include 8-100 ton hoisting and slewing mechanisms for truck cranes,16-100 ton walking mechanisms for crawler cranes, 18-30 meter hoisting and slewing mechanisms for aerial work vehicles, 6-25 ton hydraulic winches and slewing mechanisms for truck mounted cranes, and 1.5-30 ton IYJ series hydraulic winches widely used in obstacle clearing machinery, marine machinery, and petroleum machinery.
we hane many business partner ,here some famous company such these :
Mitsubishi Heavy Industries, Ltd.
SA NY HEAVY INDUSTRY CO., LTD.
XC MG Construction Machinery
ZOOMLION/Furukawa Electric Co., Ltd.

We welcome your cooperation.

FAQ

Q1: Are you a factory?

A1: Yes,Of course.

Q2: Can you provide customized products? OEM or ODM products?
A2:Yes,we can provide customized products according to your requirements. Both OEM and ODM are acceptable.

Q3: How about the delivery time?
A3: Delivery time will be within 10-30 workingdays since the PI is confirmed.

Q4: How do you ensure your product and service quality?
A4: We have a series of professional testing devices, and all the production line will strictly supervised by QC. We offer the test report before shipment.

Q5: Can you provide sample?
A5: Yes, we can provide you sample, but you need to pay for the sample and freight firstly.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application:	Motor, Electric Cars, Machinery, Marine, Car
Hardness:	Hardened Tooth Surface
Layout:	Coaxial
Gear Shape:	Cylindrical Gear
Type:	Planetary Gear Reducer
Product Name:	Slewing Drive Planetary Gearbox Gear Speed Reduc

Samples:	US$ 1000/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

gear gearbox

What are the considerations for choosing the appropriate lubrication for gear reducers?

Choosing the appropriate lubrication for gear reducers is crucial for ensuring optimal performance, longevity, and efficiency. Several considerations should be taken into account when selecting the right lubrication:

1. Load and Torque: The magnitude of the load and torque transmitted by the gear reducer affects the lubrication’s viscosity and film strength requirements. Heavier loads may necessitate higher viscosity lubricants.

2. Operating Speed: The speed at which the gear reducer operates impacts the lubrication’s ability to maintain a consistent and protective film between gear surfaces.

3. Temperature Range: Consider the temperature range of the operating environment. Lubricants with suitable viscosity indexes are crucial to maintaining performance under varying temperature conditions.

4. Contaminant Exposure: If the gear reducer is exposed to dust, dirt, water, or other contaminants, the lubrication should have proper sealing properties and resistance to contamination.

5. Lubrication Interval: Determine the desired maintenance interval. Some lubricants require more frequent replacement, while others offer extended operational periods.

6. Compatibility with Materials: Ensure that the chosen lubricant is compatible with the materials used in the gear reducer, including gears, bearings, and seals.

7. Noise and Vibration: Some lubricants have properties that can help reduce noise and dampen vibrations, improving the overall user experience.

8. Environmental Impact: Consider environmental regulations and sustainability goals when selecting lubricants.

9. Manufacturer Recommendations: Follow the manufacturer’s recommendations and guidelines for lubrication type, viscosity grade, and maintenance intervals.

10. Monitoring and Analysis: Implement a lubrication monitoring and analysis program to assess lubricant condition and performance over time.

By carefully evaluating these considerations and consulting with lubrication experts, industries can choose the most suitable lubrication for their gear reducers, ensuring reliable and efficient operation.

gear gearbox

What role do gear ratios play in optimizing the performance of gear reducers?

gear gearbox

What industries and machinery commonly utilize gear reducers?

Gear reducers are widely used across various industries and types of machinery for torque reduction and speed control. Some common industries and applications include:

1. Manufacturing: Gear reducers are used in manufacturing equipment such as conveyors, mixers, and packaging machines to control speed and transmit power efficiently.
2. Automotive: They are utilized in vehicles for applications like power transmission in transmissions and differentials.
3. Aerospace: Gear reducers are used in aircraft systems, including landing gear mechanisms and engine accessories.
4. Robotics and Automation: They play a crucial role in robotic arms, CNC machines, and automated production lines.
5. Mining and Construction: Gear reducers are used in heavy machinery like excavators, bulldozers, and crushers for power transmission and torque multiplication.
6. Energy and Power Generation: Wind turbines, hydroelectric generators, and other power generation equipment use gear reducers to convert rotational speed and transmit power.
7. Marine and Shipbuilding: They are used in ship propulsion systems, steering mechanisms, and anchor handling equipment.
8. Material Handling: Gear reducers are essential in conveyor systems, elevators, and hoists for controlled movement of materials.
9. Food and Beverage: They find applications in food processing equipment like mixers, grinders, and packaging machines.
10. Paper and Pulp: Gear reducers are used in machinery for pulp processing, paper production, and printing.

These examples represent just a fraction of the industries and machinery that benefit from the use of gear reducers to optimize power transmission and achieve the desired motion characteristics.

China OEM Low Price Vertical Slewing Gear Drive Reducer with Hydraulic Motor with Best Sales
editor by CX 2024-04-19

China OEM R Series Helical Gear Motor Reducer gearbox engine

Product Description

R series Helical Geared Motor Characteristics

1. Features:

1. High efficiency: 92%-97%;

2. Compact structure: Small offset output, two stage and three stage are in the same box.

3. High precision: the gear is made of high-quality alloy steel forging, carbonitriding and hardening treatment, grinding process to ensure high precision and stable running.

4. High interchangeability: highly modular, serial design, strong versatility and interchangeability.

2. Technical parameters

Ratio	3.41-289.74
Input power	0.12-160KW
Output torque	61-23200N.m
Output speed	5-415rpm
Mounting type	Foot mounted, flange mounted, foot and flange mounted, single-stage foot mounted, CHINAMFG flange mounted, Flange-mounted with extended bearing hub
Input Method	Flange input(AM), shaft input(AD), inline AC motor input, or AQA servo motor
Brake Release	HF-manual release(lock in the brake release position), HR-manual release(autom-atic braking position)
Thermistor	TF(Thermistor protection PTC thermisto) TH(Thermistor protection Bimetal swotch)
Mounting Position	M1, M2, M3, M4, M5, M6
Type	R17-R167
Output shaft dis.	20mm, 25mm, 30mm, 35mm, 40mm, 50mm, 60mm, 70mm, 90mm, 110mm, 120mm
Housing material	HT200 high-strength cast iron from R37,47,57,67,77,87
Housing material	HT250 High strength cast iron from R97 107,137,147,157,167,187
Heat treatment technology	carbonitriding and hardening treatment
Efficiency	92%-97%
Lubricant	VG220
Protection Class	IP55, F class

Starshine Drive

Our Team

7. Certification.

Packing

Delivery

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application:	Motor, Machinery, Agricultural Machinery, Ceramic
Hardness:	Hardened Tooth Surface
Installation:	Vertical or Horizontal
Layout:	Coaxial
Gear Shape:	Bevel-Cylindrical Gear
Step:	Double or Three Steps

Customization:	Available \| Customized Request

gear gearbox

How do gear reducers enhance the efficiency of conveyor systems and robotics?

Gear reducers play a significant role in improving the efficiency of both conveyor systems and robotics by optimizing speed, torque, and control. Here’s how they contribute:

Conveyor Systems:

In conveyor systems, gear reducers enhance efficiency in the following ways:

Speed Control: Gear reducers allow precise control over the rotational speed of conveyor belts, ensuring that materials are transported at the desired speed for efficient production processes.
Torque Adjustment: By adjusting gear ratios, gear reducers provide the necessary torque to handle varying loads and prevent overloading, minimizing energy wastage.
Reverse Operation: Gear reducers enable smooth bidirectional movement of conveyor belts, facilitating tasks such as loading, unloading, and distribution without the need for additional components.
Synchronization: Gear reducers ensure synchronized movement of multiple conveyor belts in complex systems, optimizing material flow and minimizing jams or bottlenecks.

Robotics:

In robotics, gear reducers enhance efficiency through the following means:

Precision Movement: Gear reducers provide precise control over the movement of robot joints and arms, enabling accurate positioning and manipulation of objects.
Reduced Inertia: Gear reducers help reduce the inertia experienced by robotic components, allowing for quicker and more responsive movements while conserving energy.
Compact Design: Gear reducers offer a compact and lightweight solution for achieving various motion profiles in robotic systems, allowing for efficient use of space and resources.
Torque Amplification: By amplifying torque from the motor, gear reducers enable robots to handle heavier loads and perform tasks that require greater force, enhancing their overall capabilities.

gear gearbox

What role do gear ratios play in optimizing the performance of gear reducers?

gear gearbox

What are the benefits of using a gear reducer in industrial applications?

Gear reducers offer several benefits that make them indispensable in various industrial applications:

1. Speed Reduction: Gear reducers allow the reduction of high-speed input from motors or engines to lower, more usable output speeds for specific applications, ensuring proper equipment operation and safety.

2. Torque Increase: By leveraging the mechanical advantage of gear ratios, gear reducers can significantly increase torque output, enabling the handling of heavy loads and providing the necessary power for tasks such as lifting, conveying, and processing.

3. Precise Control: Gear reducers enable fine-tuning of rotational speed and torque, providing precise control over machinery and processes, which is crucial in industries like manufacturing, material handling, and robotics.

4. Shock Load Absorption: Gear reducers can absorb and dampen sudden shocks or changes in load, protecting both the machinery and connected components from abrupt forces that could otherwise lead to damage.

5. Versatility: With various gear types (e.g., spur, helical, worm) and designs, gear reducers can be tailored to different applications, including those requiring specific speed ratios, torque ranges, and environmental conditions.

6. Efficient Power Transmission: Gear reducers offer high mechanical efficiency, minimizing energy loss during power transmission, which is especially valuable in energy-conscious industries.

7. Compact Design: Gear reducers provide a compact solution for transmitting power and adjusting speeds, making them suitable for installations with space constraints.

8. Reliability and Longevity: Well-designed and properly maintained gear reducers can offer extended service life, contributing to reduced downtime and maintenance costs.

Overall, gear reducers enhance the performance, efficiency, and reliability of industrial equipment, making them essential components in a wide range of applications across various industries.

China OEM R Series Helical Gear Motor Reducer gearbox engine
editor by CX 2024-04-09

China OEM Ultra-Thin Gear Reducer Model 14-40 best automatic gearbox

Product Description

HMCG-II-E Series Harmonic Reducer

HangZhou Yijiaang Automation Technology Co., Ltd

HMCG-II-E Series Harmonic Reducer

The HMCG-II-E series harmonic reducer features an input shaft connected to the wave generator inner hole through a cross slider coupling. It is compatible with rigid wheel end fixed and flexible wheel end output connection modes. Available in production specifications ranging from 14 to 40 across the full series, it is ideal for high precision applications in aerospace, robotics, semiconductors, power inspection, and automation equipment.

Principle of Harmonic Gear Transmission

Invented by C.W. Musser in 1955, the harmonic gear drive utilizes the elastic deformation of flexible components for movement and power transmission. By breaking away from traditional rigid component transmissions, this drive achieves unique functions difficult to replicate. The deformation process of the flexible component is symmetrical and harmonic in nature, hence the name “harmonic drive.”

Harmonic Deceleration Principle

The deceleration principle of harmonic gear transmission involves the controlled elastic deformation of the flexwheel to achieve motion and power transmission. Through the rotation of the elliptic CAM in the wave generator, the flexwheel deforms, allowing for continuous changes in tooth engagement states to facilitate active wave generator to flexwheel movement transmission.

Product Parameters

Model	Reduction ratio	Rated torque at input 2000r/min	Permissible CHINAMFG torque at start/stop	Permissible max.value of ave.load torque	instantaneous permissible max.troque	Permissible max.input rotational speed	Permissible ave.input rotational speed	Backlash(arc sec)	Transmission accuracy(arc sec)
Model	Reduction ratio	Nm	Nm	Nm	Nm	r/min	r/min	≤	≤
14	50	7	23	9	46	8000	3500	20	90
	80	10	30	14	51			20	90
	100	10	36	14	70			10	90
17	50	21	44	34	91	7000	3500	20	90
	80	29	56	35	113			20	90
	100	31	70	51	143			10	90
20	50	33	73	44	127	6000	3500	20	60
	80	44	96	61	165			20	60
	100	52	107	64	191			10	60
	120	52	113	64	161			10	60
25	50	51	127	72	242	5500	3500	20	60
	80	82	178	113	332			20	60
	100	87	204	140	369			10	60
	120	87	217	140	395			10	60
32	50	99	281	140	497	4500	3500	20	60
	80	153	395	217	738			10	60
	100	178	433	281	841			10	60
	120	178	459	281	892			10	60
40	50	178	523	255	892	4000	3000	10	60
	80	268	675	369	1270			10	60
	100	345	738	484	1400			10	60
	120	382	802	586	1530			10	60

Detailed Photos

Company Profile

Welcome to HangZhou Yijiaang Automation Technology Co., Ltd

Established in 2018, we specialize in transmission components including planetary reducers, harmonic reducers, RV reducers, DD motors, linear motors, and more. Our products are widely used in CNC machine tools, packaging machinery, automation equipment, and medical equipment.

At HangZhou Yijiaang, we are committed to providing quality products and services. Our focus on technological innovation and customer service ensures that we create value with every endeavor. Our goal is professional perfection, with the vision of making the world move.

Experience the difference with our transmission products technical services. Contact us today!

FAQ

Product Description

Welcome to HangZhou Yijiaang Automation Technology Co., Ltd

Choosing the Right Gearbox/Speed Reducer

When selecting a gearbox or speed reducer, providing the motor drawing with parameters is the best way to ensure compatibility. Our engineers will carefully assess the information and recommend the most suitable gearbox model for your needs.

Alternatively, you can also provide the following specifications:

Type, model, and torque

Ratio or output speed

Working condition and connection method

Input mode and input speed

At HangZhou Yijiaang Automation Technology Co., Ltd, we are committed to helping you find the perfect gearbox or speed reducer for your application. Contact us today for expert guidance and top-quality products.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application:	Machinery, Agricultural Machinery, Car, Robot
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Layout:	Coaxial
Gear Shape:	Cylindrical Gear
Step:	Single-Step

Samples:	US$ 225/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

gear gearbox

How do gear reducers enhance the efficiency of conveyor systems and robotics?

Gear reducers play a significant role in improving the efficiency of both conveyor systems and robotics by optimizing speed, torque, and control. Here’s how they contribute:

Conveyor Systems:

In conveyor systems, gear reducers enhance efficiency in the following ways:

Speed Control: Gear reducers allow precise control over the rotational speed of conveyor belts, ensuring that materials are transported at the desired speed for efficient production processes.
Torque Adjustment: By adjusting gear ratios, gear reducers provide the necessary torque to handle varying loads and prevent overloading, minimizing energy wastage.
Reverse Operation: Gear reducers enable smooth bidirectional movement of conveyor belts, facilitating tasks such as loading, unloading, and distribution without the need for additional components.
Synchronization: Gear reducers ensure synchronized movement of multiple conveyor belts in complex systems, optimizing material flow and minimizing jams or bottlenecks.

Robotics:

In robotics, gear reducers enhance efficiency through the following means:

Precision Movement: Gear reducers provide precise control over the movement of robot joints and arms, enabling accurate positioning and manipulation of objects.
Reduced Inertia: Gear reducers help reduce the inertia experienced by robotic components, allowing for quicker and more responsive movements while conserving energy.
Compact Design: Gear reducers offer a compact and lightweight solution for achieving various motion profiles in robotic systems, allowing for efficient use of space and resources.
Torque Amplification: By amplifying torque from the motor, gear reducers enable robots to handle heavier loads and perform tasks that require greater force, enhancing their overall capabilities.

gear gearbox

Can gear reducers be used for both speed reduction and speed increase?

gear gearbox

What are the benefits of using a gear reducer in industrial applications?

Gear reducers offer several benefits that make them indispensable in various industrial applications:

6. Efficient Power Transmission: Gear reducers offer high mechanical efficiency, minimizing energy loss during power transmission, which is especially valuable in energy-conscious industries.

7. Compact Design: Gear reducers provide a compact solution for transmitting power and adjusting speeds, making them suitable for installations with space constraints.

8. Reliability and Longevity: Well-designed and properly maintained gear reducers can offer extended service life, contributing to reduced downtime and maintenance costs.

Overall, gear reducers enhance the performance, efficiency, and reliability of industrial equipment, making them essential components in a wide range of applications across various industries.

China OEM Ultra-Thin Gear Reducer Model 14-40 best automatic gearbox
editor by CX 2024-03-07

China OEM Factory Price Spare Part Gear Transmission Gearbox Planetary Speed Reducer for Concrete Mixer Machine gearbox drive shaft

Product Description

Product Description:
Planetar gearbox is a kind of reducer with wide versatility. The inner gear adopts low carbon alloy steel carburizing quenching and grinding or nitriding process. Planetary gearbox has the characteristics of small structure size, large output torque, high speed ratio, high efficiency, safe and reliable performance, etc. The inner gear of the planetary gearbox can be divided into spur gear and helical gear.

Technical parameter:

Section number		single section
Reduction ratio	i	3	4	5	6	7	8	9	10
Rated output torque (Ta)	Nm	55	50	60	55	50	45	40	40
Emergency stop torque (Tzwor*)	Nm	Three times the rated output torque
Rated input speed (n)	rpm	5000
Maximum input speed (na)	rpm	1000o
Ultra-precision backlash (PO)	arcmin	–
Precision backlash (P1)	arcmin	≤3
Standard backlash (P2)	arcmin	≤5
Torsional rigidity	Nm/arcmin	7
Allowable radial force	N	1530
allowable axial force	N	765
service life	hr	20000
effectiveness (n)	%	≥97%
weight	kg	1.3
Operating temperature	ºC	-10°ºC~+90°ºC
lubricating		Synthetic grease
Protection class		IP64
Installation direction		any direction
Noise value(n1=3000rpm,no load)	dB(A)	≤58
Moment of inertia (J)	kg-cm’	0.16 0.14 0.13

Picture:

Rear Reducer features:

1. High-quality aluminum alloy, light in weight and non-rusting.
2. Large in output torque.
3. Smooth running and low noise,durable in dreadful conditions.
4. High radiation efficiency.
5. Good-looking appearance, durable in service life and small volume.
6. Suitable for omnibearing installation.

Company Information:

HangZhou ChangLong Motor Co.,Ltd

( original HangZhou LINNAN Special Motor Factory)

With 20 years’ hard working on developing , designing and manufacturing the high-speed electrical spindle, we have got our new GDZ-series electrical spindle, which is well recognized by clients for its great and stable quality after being put large quantities to the market. We provide quality guarantee and after-sales service for all of our products with the free manual work and the cost price for the materials or fittings.

FAQ:

How about the warrantly about your company?

bearings=half a year, other parts a year

Which kinds of bearing you are using?
It will according to your order. We have different price range for you with different bearing.

Do you have other spare parts for spindle motor, just like gripper, VFD, collet ?
We have all kits.And we can let engineers help you to program them.

Can I visit your factory?
Yes, welcome to our factory.

Do you have installation page?
Yes,we have.

Can you show me the inspection report ?

Yes We will send you inspection report of spindle after you send me full money before despatch.

The reasen is that I’m not sure which spindle will be sent to you.Every spindle have it’s inspection report .And they are different in details.Only if you pay the money,we can decide which spindle to deliver you.

We also have spindle motor matching inverter(VFD), collet , gripper etc.

If you need other kinds of parts, please don’t hesitate to contact us.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application:	Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery
Function:	Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout:	Cycloidal
Hardness:	Hardened Tooth Surface
Step:	Double-Step
Type:	Planetary Gear Box

Customization:	Available \| Customized Request

gear gearbox

Can gear reducers be customized for specific industrial needs and requirements?

Yes, gear reducers can be customized to meet specific industrial needs and requirements. Manufacturers offer customization options to ensure that gear reducers are tailored to the unique demands of various applications:

1. Gear Ratio Selection: Gear reducers can be designed with specific gear ratios to achieve the desired speed reduction or increase, catering to the specific requirements of the machinery or equipment.

2. Shaft Configurations: Gear reducers can be configured with different shaft sizes, lengths, and orientations to fit seamlessly into existing systems or accommodate specific mounting arrangements.

3. Torque Capacity: Customized gear reducers can be designed to handle higher or lower torque loads based on the application’s operational requirements.

4. Environmental Considerations: Gear reducers can be customized with special coatings, materials, or seals to withstand harsh environments, extreme temperatures, or corrosive conditions.

5. Noise and Vibration Reduction: Custom designs can incorporate features to reduce noise and dampen vibrations, enhancing the overall operation and user experience.

6. Mounting and Connection Options: Manufacturers can adapt gear reducer designs to include specific mounting interfaces or connection methods that align with the equipment’s design.

7. Lubrication and Maintenance: Customized gear reducers can include features for easy maintenance, such as accessible lubrication points or monitoring systems.

8. Integration with Controls: Gear reducers can be customized to integrate seamlessly with control systems, sensors, or automation processes, enhancing system efficiency and performance.

By collaborating with manufacturers and providing detailed specifications, industries can obtain tailor-made gear reducers that address their specific operational needs and contribute to the success of their applications.

gear gearbox

Can gear reducers be used for both speed reduction and speed increase?

gear gearbox

How do gear reducers handle variations in input and output speeds?

Gear reducers are designed to handle variations in input and output speeds through the use of different gear ratios and configurations. They achieve this by utilizing intermeshing gears of varying sizes to transmit torque and control rotational speed.

The basic principle involves connecting two or more gears with different numbers of teeth. When a larger gear (driving gear) engages with a smaller gear (driven gear), the rotational speed of the driven gear decreases while the torque increases. This reduction in speed and increase in torque enable gear reducers to efficiently adapt to variations in input and output speeds.

The gear ratio is a critical factor in determining how much the speed and torque change. It is calculated by dividing the number of teeth on the driven gear by the number of teeth on the driving gear. A higher gear ratio results in a greater reduction in speed and a proportionate increase in torque.

Planetary gear reducers, a common type, use a combination of gears including sun gears, planet gears, and ring gears to achieve different speed reductions and torque enhancements. This design provides versatility in handling variations in speed and torque requirements.

In summary, gear reducers handle variations in input and output speeds by using specific gear ratios and gear arrangements that enable them to efficiently transmit power and control motion characteristics according to the application’s needs.

China OEM Factory Price Spare Part Gear Transmission Gearbox Planetary Speed Reducer for Concrete Mixer Machine gearbox drive shaft
editor by CX 2024-02-26

China OEM High Precision Flange Gearbox with Ratio 3~100 Planetary Gear Speed Reducer with high quality

Product Description

High Precision Flange Gearbox With Ratio 3~100 planetary gear speed reducer

Components:

1. Gearbox Housing & Flange: Aluminum-alloy Die Casting ADC12
2. Gear set: Precision Planetary Gear Set
Ring Gears: 40Cr
Planetary Gears: 20CrMnTi, Surface Hardness HRC58~62, Inner Hardness HRC33~40
3. Input Configurations: Keyed Hollow Shaft with Motor Adaptor
4. Output Configurations: Keyed CZPT Shaft Output
keyless Solid Shaft Output
5. Applicable Motors:
Servo Motors, Stepper Motors

Features:
1. AOKMAN high precision planetary gearboxes including a full series of inline(linear) and right angle precision planetary gearboxes
2. High precision, high dynamic, low backlash
3. Up to 3 optional backlash: Ultra Precision Backlash, High Precision Backlash, Standard Backlash
4. Superior performance for precision industrial automation and servo applications

series	Stage	Models	Ratio	Rated Torque	Rated input Speed	Max input Speed	Backlash	Efficiency
PPG(Linear)	1	PPG040	3,4,5,7,8,10	9N.m~423N.m	25,003,000,360,040,000,000	3600	≤10 arcmin	≥97%
		PPG060				4800
		PPG080				6000
		PPG120				8000
		PPG160
	2	PPG040	12,15,20,25,30,35,40,50,70,100	9N.m~423N.m	25,003,000,360,040,000,000	3600,	≤15 arcmin	≥94%
		PPG060				4800
		PPG080				6000
		PPG120				8000
		PPG160

1.More than 35 years experience in R&D and manufacturing, export gear motors & industrial gearboxes.
2. Standardization of the gearbox series
3. Strong design capability for large power & customized gearboxes.
4. High quality gearboxes and proven solutions provider.
5. Strict quality control process, stable quality.
6. Less than 2% of the quality complaints.
7. Modular design, short delivery time.
8. Quick response & professional services

AOKMAN was founded in 1982, which has more than 36 years in R & D and manufacturing of gearboxes, gears, shaft, motor and spare parts.
We can offer the proper solution for uncountable applications. Our products are widely used in the ranges of metallurgical, steel, mining, pulp and paper, sugar and alcohol market and various other types of machines with a strong presence in the international market.
AOKMAN has become a reliable supplier, able to supply high quality gearboxes.With 36 years experience, we assure you the utmost reliability and security for both product and services.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application:	Motor, Machinery, Industry
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Layout:	Coaxial
Gear Shape:	Bevel Gear
Step:	Single-Step

Customization:	Available \| Customized Request

planetary gearbox

Role of Planetary Gearboxes in Powertrain Systems of Electric and Hybrid Vehicles

Planetary gearboxes play a critical role in the powertrain systems of both electric and hybrid vehicles, contributing to their efficiency and performance:

Electric Motor Integration: In electric vehicles (EVs) and hybrid vehicles, planetary gearboxes are commonly used to connect the electric motor to the drivetrain. They enable torque and speed transformation, ensuring the motor’s output is suitable for the vehicle’s desired speed range and load conditions.

Torque Splitting in Hybrids: Hybrid vehicles often have both an internal combustion engine (ICE) and an electric motor. Planetary gearboxes enable torque splitting between the two power sources, optimizing their combined performance for various driving scenarios, such as electric-only mode, hybrid mode, and regenerative braking.

Regenerative Braking: Planetary gearboxes facilitate regenerative braking in electric and hybrid vehicles. They enable the electric motor to function as a generator, converting kinetic energy into electrical energy during deceleration. This energy can then be stored in the vehicle’s battery for later use.

Compact Design: Planetary gearboxes offer a compact design with a high power density, making them suitable for the limited space available in electric and hybrid vehicles. This compactness allows manufacturers to maximize interior space and accommodate battery packs, drivetrain components, and other systems.

Efficient Power Distribution: The unique arrangement of planetary gears allows for efficient power distribution and torque management. This is particularly important in electric and hybrid powertrains, where optimal power allocation between different components contributes to overall efficiency.

CVT Functionality: Some hybrid vehicles incorporate Continuously Variable Transmission (CVT) functionality using planetary gearsets. This enables seamless and efficient transitions between various gear ratios, improving the driving experience and enhancing fuel efficiency.

Performance Modes: Planetary gearboxes facilitate the implementation of different performance modes in electric and hybrid vehicles. These modes, such as “Sport” or “Eco,” adjust the power distribution and gear ratios to optimize performance or energy efficiency based on the driver’s preferences.

Reduction Gear for Electric Motors: Electric motors often operate at high speeds and require reduction gearing to match the vehicle’s requirements. Planetary gearboxes provide the necessary gear reduction while maintaining efficiency and torque output.

Efficient Torque Transfer: Planetary gearboxes ensure efficient transfer of torque from the power source to the wheels, resulting in smooth acceleration and responsive performance in electric and hybrid vehicles.

Integration with Energy Storage: Planetary gearboxes contribute to the integration of energy storage systems, such as lithium-ion batteries, by efficiently connecting the power source to the drivetrain while managing power delivery and regeneration.

In summary, planetary gearboxes are integral components of the powertrain systems in electric and hybrid vehicles. They enable efficient power distribution, torque transformation, regenerative braking, and various driving modes, contributing to the overall performance, efficiency, and sustainability of these vehicles.

planetary gearbox

Considerations for Selecting Size and Gear Materials in Planetary Gearboxes

Choosing the appropriate size and gear materials for a planetary gearbox is crucial for optimal performance and reliability. Here are the key considerations:

1. Load and Torque Requirements: Evaluate the anticipated load and torque that the gearbox will experience in the application. Select a gearbox size that can handle the maximum load without exceeding its capacity, ensuring reliable and durable operation.

2. Gear Ratio: Determine the required gear ratio to achieve the desired output speed and torque. Different gear ratios are achieved by varying the number of teeth on the gears. Select a gearbox with a suitable gear ratio for your application’s requirements.

3. Efficiency: Consider the efficiency of the gearbox, which is influenced by factors such as gear meshing, bearing losses, and lubrication. A higher efficiency gearbox minimizes energy losses and improves overall system performance.

4. Space Constraints: Evaluate the available space for installing the gearbox. Planetary gearboxes offer compact designs, but it’s essential to ensure that the selected size fits within the available area, especially in applications with limited space.

5. Material Selection: Choose suitable gear materials based on factors like load, speed, and operating conditions. High-quality materials, such as hardened steel or specialized alloys, enhance gear strength, durability, and resistance to wear and fatigue.

6. Lubrication: Proper lubrication is critical for reducing friction and wear in the gearbox. Consider the lubrication requirements of the selected gear materials and ensure the gearbox is designed for efficient lubricant distribution and maintenance.

7. Environmental Conditions: Assess the environmental conditions in which the gearbox will operate. Factors such as temperature, humidity, and exposure to contaminants can impact gear material performance. Choose materials that can withstand the operating environment.

8. Noise and Vibration: Gear material selection can influence noise and vibration levels. Some materials are more adept at dampening vibrations and reducing noise, which is essential for applications where quiet operation is crucial.

9. Cost: Consider the budget for the gearbox and balance the cost of materials, manufacturing, and performance requirements. While high-quality materials may increase initial costs, they can lead to longer gearbox lifespan and reduced maintenance expenses.

10. Manufacturer’s Recommendations: Consult with gearbox manufacturers or experts for guidance on selecting the appropriate size and gear materials. They can provide insights based on their experience and knowledge of various applications.

Ultimately, the proper selection of size and gear materials is vital for achieving reliable, efficient, and long-lasting performance in planetary gearboxes. Taking into account load, gear ratio, materials, lubrication, and other factors ensures the gearbox meets the specific needs of the application.

planetary gearbox

Impact of Gear Ratio on Output Speed and Torque in Planetary Gearboxes

The gear ratio of a planetary gearbox has a significant effect on both the output speed and torque of the system. The gear ratio is defined as the ratio of the number of teeth on the driven gear (output) to the number of teeth on the driving gear (input).

1. Output Speed: The gear ratio determines the relationship between the input and output speeds of the gearbox. A higher gear ratio (more teeth on the output gear) results in a lower output speed compared to the input speed. Conversely, a lower gear ratio (fewer teeth on the output gear) leads to a higher output speed relative to the input speed.

2. Output Torque: The gear ratio also affects the output torque of the gearbox. An increase in gear ratio amplifies the torque delivered at the output, making it higher than the input torque. Conversely, a decrease in gear ratio reduces the output torque relative to the input torque.

The relationship between gear ratio, output speed, and output torque is inversely proportional. This means that as the gear ratio increases and output speed decreases, the output torque proportionally increases. Conversely, as the gear ratio decreases and output speed increases, the output torque proportionally decreases.

It’s important to note that the gear ratio selection in a planetary gearbox involves trade-offs between output speed and torque. Engineers choose a gear ratio that aligns with the specific application’s requirements, considering factors such as desired speed, torque, and efficiency.

China OEM High Precision Flange Gearbox with Ratio 3~100 Planetary Gear Speed Reducer with high quality
editor by CX 2024-02-22

ANG Helical Gear Reducer
Model	R17 ~ 187, F37-177, K37-187, S37-97
Input power	0.06kw ~ 250kw
Input speed	750rpm ~ 3000rpm
Reduction ratio	1/1.3 ~ 1/27000
Input motor	AC (1 phase or 3 phase) / DC / BLDC motor
Install type	Foot / CHINAMFG shaft / Hollow shaft / Output flange…
Efficiency	94% ~ 98 % for R F K series
Material of housing	die-cast aluminum / Cast iron / Stainless steel
Precision of gear	Accurate grinding, class 6
Heat treatment	Carburizing and quenching
Accessories	Brake / Flange / Motor adapter / Torque arm …